The sight glass of EN 543.4 prismatic fluid sight glasses is embedded in the body during the injection process and it is therefore absolutely leak tight.
These fluid sight glasses use the prismatic effect of a cat’s eye to give a clear indication of the fluid level unaffected by fluid color or fluid viscosity. The advantage of this effect is particularly obvious in the case of underfilling or overfilling and for inspection under unfavorable light conditions.
The seal is embedded in a radial recess, and thus cannot be squeezed out during tightening.
Assembly note:
For wall thicknesses below 4 mm, use GN 7430 thin hexagon nuts.
Specification
Body
Plastic
Technopolymer (Polyamide PA)
Black, matte finish
Temperature resistant up to 284 °F (140 °C)
Sight glass
Plastic
Polysulfon
Pressure resistant up to 7 bar
Seal
Rubber FPM (Viton®)
ELESA original design 
