Products | J.W. Winco Standard Parts

GN 1414 Telescopic Slides Steel, with Full Extension and Dampened Self-Retracting Mechanism, Load Capacity up to 80 lbf

Photo

Product description

Information

GN 1414 telescopic slides are installed vertically and in pairs. The stroke reaches ≈ 100 % of the nominal length l1 (full extension).
The rubber stops of type F dampen the impact of the slide in the end positions. This feature minimizes noise development and increases the lifespan. If larger static or dynamic loads occur in the direction of extension, they should be absorbed by external stop elements.

The telescopic slides are delivered in pairs. They can be installed on the extension on either the left or right side due to the mechanics. All mounting holes are easy to reach through auxiliary holes. Only the mounting holes are shown, but other production-related holes may be present.

Specification

Slide profile
Steel, Zinc plated, blue passivated finishZB

Bearings
Roller bearing steel, hardened

Ball cage, outer slide
Plastic

Ball cage, inner slide
Steel, zinc plated

Rubber stop and detach function
Plastic / Elastomer

Self-retracting mechanism, dampened
Steel / plastic

Operating temperature
-4 °F to 212 °F (-20 °C to 100 °C)





RoHS compliant

On request

Other lengths and hole spacing
Other attachment options
Other surfaces

Technical drawing

3D
Hide technical drawing
GN 1414 Steel Telescopic Slides, with Full Extension and Dampened Self-Retracting Mechanism, Load Capacity up to 80 lbf sketch

Part Options / Table

Type

FWith rubber stop, locking device in back, detach function

Identification no.

1Fastening using through-holes
Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)
l1l2 +0.12/-0.12
Stroke
l3Fs per pair
at 10,000 cycles

at 100,000 cycles
11.819.8421.6558.45 lbf (260 N)31.47 lbf (140 N)
13.7812.6026.3858.45 lbf (260 N)31.47 lbf (140 N)
15.7514.7630.5169.69 lbf (310 N)42.71 lbf (190 N)
17.7217.7235.4380.93 lbf (360 N)53.95 lbf (240 N)
19.6919.6939.3780.93 lbf (360 N)53.95 lbf (240 N)
21.6521.6543.3169.69 lbf (310 N)42.71 lbf (190 N)
23.6223.6247.2469.69 lbf (310 N)42.71 lbf (190 N)
25.5925.5951.1858.45 lbf (260 N)31.47 lbf (140 N)

Build & Price

Length l1
Type

Identification no.

Finish

Mounting holes - outer slide

ccf2600a-3f0d-413c-920c-2ec2da87ac93
Show / Hide columns
l1a7a8a9a10
300191.75207.75--
350241.75257.75--
400291.75307.75--
450195211341.75357.75
500227243391.75407.75
550259275441.75457.75
600291307491.75507.75
650323339541.75557.75

Mounting holes - inner slide

9a4c48ac-e036-4dcc-b242-31d5bc403168
Show / Hide columns
l1i4i5i6i7i8i9
300129.5145.5-225.5241.5251
350129.5145.5155289.5305.5315
400161.5177.5187321.5337.5347
450193.5209.5219385.5401.5411
500225.5241.5251449.5465.5475
550225.5241.5251481.5497.5507
600257.5273.5283513.5529.5539
650289.5305.5315577.5593.5603

Fastening screws

For the said loading forces FS to be absorbed reliably in the surrounding structure, all available through-holes of the outer and inner slide having a diameter (Ø) of 4.5 must be used. Alternatively, the outer slide has holes with a diameter (Ø) of 6.3 for Euro screws. The elongated holes, Ø 4.5 x 4.8, are used likewise for fastening and facilitate adjustment during mounting when needed. Failure to use fastening screws reduces the specified load capacity accordingly. The following screws can be used for mounting:

Designation - standard
Hexagon socket button
head screw ISO 7380
Pan head screw,
Phillips ISO 7045
Pan head tapping screw,
Phillips ISO 7049

Outer slide

M 4

M 4

ST 3.9 / 4.2

Inner slide

M 4

M 4

ST 3.9 / 4.2

Self-retracting mechanism, dampened

db5f6fb3-c193-43a4-9315-1b05456a781e

GN 1414 telescopic slides have a dampened self-retracting mechanism, which is also called “soft-close”. The dampened self-retracting mechanism is divided into two main functions and offers the best possible ease of use on closing the extension.
The self-retracting mechanism takes over the automatic retraction of the slides on the last 1.85 pulgadas (47 mm) of stroke in the back stop position, where the slides are held in place accordingly. The retraction force is about 8.99 lbf (40 newtons) per slide pair. Additionally, the closing movement is slowed down considerably by the dampening mechanism. An extremely smooth and gentle closing movement is achieved. This retraction force has to be overcome accordingly on opening the extension.
The dampened self-retracting mechanism is designed for loads weighing up to 79 lbs (36 kg) based on 60,000 cycles (LGA standard). Proper use, including the reduction of the stroke speed to no more than 0.49 ft/s (0.15 m/s) on reaching the retraction mechanism, as well as compliance with the load values are required.

In this slide variant the available retraction force can be regarded as a locking device, which is noticeable through a slight restriction on opening the extension.

7548c19d-6c03-40b3-8397-e0c506d52cd1

Detach function

16a47631-adad-4738-a085-518c65e87116

Type F has a detach function through which the extension slides can be completely separated from one another in the area of the middle and inner slide. This feature not only facilitates mounting, but also allows the extension to be quickly removed, for example, when frequent maintenance work is performed on the components located behind.

The telescopic slide can be quickly and easily detached in the extracted position through activation of the release lever, allowing the inner slide to be removed from the front.

For reattaching the slides, the ball cages need to be moved to the front end position. Then the inner slide is inserted to the back end stop where it locks into place automatically.

The protected arrangement of the release mechanism prevents accidental detachment of the slide.

bb271dfd-6acb-4861-9593-fa5ed0334773

Information on load capacity

The maximum load capacity of telescopic slides depends on the slide profile, the nominal length l1, and the resulting stroke l2. Furthermore, the extension width, the slide materials used, and the parts of the component options, such as the damping self-retracting mechanism, have a considerable influence.
The information on the maximum load capacity of the telescopic slides was determined in fatigue tests under the following conditions:

- Slide arrangement vertical in pairs
- Observance of all mounting information
- Warp-resistant test set-up
- Equal distribution of the load FS throughout the extension finish
- Standard slide spacing of 17.72 inches (450 mm)
- 10,000 or 100,000 test cycles (one extraction and retraction = one cycle)
- Gradual increasing of load

25c5c185-2e64-457f-a285-5cb24644c6fc

Wear, performance, and maximum bending were assessed after every test segment.

Selected Part

Total US Dollars (net)
$25.51
In stock: 0
Call / Email for Delivery Time
Please note our quantity discounts (US Dollars).
MinMaxPrice
19$25.51
1024$23.38
2549$21.26
≥ 50$19.13
Weight: -
If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 800-877-8351
RoHS compliant: -
This part is new in our product range, no details are available at this time. For more recent details on the RoHS compatibility, please contact our Sales Department!
Phone: 800-877-8351
All Prices are in US Dollars. Taxes Not Included.

CAD Download

Email CAD File

To receive an email with a CAD download without creating an account, please enter your e-mail address. Max of 3 CAD files per day unless you create an account.

Please enter the code you can find in the picture.



Save as Favorites

Please enter the code you can find in the picture.

Need Help?

Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM Central Time: 800-877-8351

Special Requests | Contact our sales team

This could also be interesting...

Hinweis zur Weiterleitung

Für diese Landesversion verlassen Sie die aktuelle Webseite und werden zur jeweiligen Landesvertretung weitergeleitet. Bitte beachten Sie, dass es zu Abweichungen von Darstellung und Inhalten kommen kann.

Sie werden nicht automatisch weitergeleitet. Bitte klicken Sie den unten genannten Link.

Note about forwarding

For this country version you leave the current website and are forwarded to the respective country representation. Please note that there may be deviations in presentation and content.

You will not be redirected automatically. Please click on the link below.


JW Winco, USA
Cancel
JW Winco - Contact

United States
E-Mail: sales@jwwinco.com
Phone: 800-877-8351
Fax: 800-472-0670
Hours M-F 7:30 AM - 5:00 PM CT

Request Callback:

Privacy Policy

Request a Catalog

Request one of our many catalogs! For an overview of our products request the Product Overview Catalog (POC).

Request Free Catalogs

Sales Contacts

You are looking for a Winco partner near you? Please select the country.