GN 638 Ball Jointed Leveling Feet Stainless Steel, with Plastic or Stainless Steel Thrust Pad

Photo

GN 638 Stainless Steel Ball Jointed Leveling Feet, with Plastic or Stainless Steel Thrust Pad Material: NI - Stainless steel
Material: NI - Stainless steel
GN 638 Stainless Steel Ball Jointed Leveling Feet, with Plastic or Stainless Steel Thrust Pad Material: NI - Stainless steel GN 638 Stainless Steel Ball Jointed Leveling Feet, with Plastic or Stainless Steel Thrust Pad Material: NV - Stainless steel
Stainless-Steel

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

  • corrosion-resistant
  • precise fit
  • environmentally friendly
Show all Stainless Steel products

Product description

Information

GN 638 ball jointed leveling feet are a low cost solution for clamping operations or for load bearing purposes. The versions with plastic thrust pad prevent damage to sensitive surfaces. The stainless steel version is preferred for applications in more aggressive environments or with higher loads.

The ball diameter d3 is smaller than the diameter of the threaded stud, allowing them to be screwed into position from the ball side. It is easy to press the ball end of the grub screw into the thrust pad by hand, and it’s also easily dismantled.

The static load capacity has been determined by a series of tests but are approximate. For these tests the loads were placed vertically over the stud. At the measured load of 787 lbf (3.5 kN) there was no remaining deformation visible on the thrust pad nor was there any breakage.

Specification

Grub screw
Stainless steelNI
European Standard No. 1.4305 (AISI 303)

Thrust pad
Plastic
Technopolymer (Polyacetal POM)
  • Temperature resistant up to 176 °F (80 °C)
  • Black, matte finish

Grub screw
Stainless steelNV
European Standard No. 1.4305 (AISI 303)

Thrust pad
Stainless steel
European Standard No. 1.4305 (AISI 303)
  • O-ring: Viton® rubber (FPM)
  • Temperature resistant up to 392 °F (200 °C)


RoHS compliant

Technical drawing

3D
Hide technical drawing
GN 638 Stainless Steel Ball Jointed Leveling Feet, with Plastic or Stainless Steel Thrust Pad sketch

Part Options / Table

Show / Hide columns

Inch

Dimensions in: Inch (change to Metric)
d1
NI

NV
d2
Thread
l1d3l2A/FStatic load
(See information)
NI


NV
0.59-1/4 x 201.021.421.81-0.180.301/8787 lbf (3.5 kN)-
0.59-5/16 x 180.791.381.772.280.180.301/8787 lbf (3.5 kN)-
0.71-3/8 x 161.341.732.242.910.240.363/16787 lbf (3.5 kN)-
0.830.833/8 x 161.341.732.242.910.240.393/16787 lbf (3.5 kN)2473 lbf (11 kN)
0.830.831/2 x 131.342.242.913.700.310.393/16787 lbf (3.5 kN)3597 lbf (16 kN)
0.980.983/8 x 161.341.732.242.910.240.413/16787 lbf (3.5 kN)2473 lbf (11 kN)
0.980.981/2 x 131.342.242.913.700.310.413/16787 lbf (3.5 kN)3597 lbf (16 kN)
1.261.263/8 x 161.341.732.242.910.240.433/16787 lbf (3.5 kN)2473 lbf (11 kN)
1.261.261/2 x 131.342.242.913.700.310.433/16787 lbf (3.5 kN)3597 lbf (16 kN)
1.571.573/8 x 161.341.732.242.910.240.513/16787 lbf (3.5 kN)2473 lbf (11 kN)
1.571.571/2 x 131.342.242.913.700.310.513/16787 lbf (3.5 kN)3597 lbf (16 kN)
1.971.973/8 x 161.341.732.242.910.240.513/16787 lbf (3.5 kN)2473 lbf (11 kN)
1.971.971/2 x 131.342.242.913.700.310.513/16787 lbf (3.5 kN)3597 lbf (16 kN)
Show / Hide columns

Metric

Dimensions in: Inch | Metric
d1
NI

NV
d2
Thread
l1d3l2A/FStatic load
(See information)
NI


NV
0.59-M 61.021.421.81-0.180.303787 lbf (3.5 kN)-
0.59-M 80.791.381.772.280.240.304787 lbf (3.5 kN)-
0.71-M 61.021.421.81-0.180.363787 lbf (3.5 kN)-
0.71-M 80.791.381.772.280.240.364787 lbf (3.5 kN)-
0.71-M 101.341.732.242.910.310.365787 lbf (3.5 kN)-
0.830.83M 61.021.421.81-0.180.393787 lbf (3.5 kN)787 lbf (3.5 kN)
0.830.83M 80.791.381.772.280.240.394787 lbf (3.5 kN)1574 lbf (7 kN)
0.830.83M 101.341.732.242.910.310.395787 lbf (3.5 kN)2473 lbf (11 kN)
0.830.83M 121.342.242.913.700.370.396787 lbf (3.5 kN)3597 lbf (16 kN)
0.980.98M 61.021.421.81-0.180.413787 lbf (3.5 kN)787 lbf (3.5 kN)
0.980.98M 80.791.381.772.280.240.414787 lbf (3.5 kN)1574 lbf (7 kN)
0.980.98M 101.341.732.242.910.310.415787 lbf (3.5 kN)2473 lbf (11 kN)
0.980.98M 121.342.242.913.700.370.416787 lbf (3.5 kN)3597 lbf (16 kN)
1.261.26M 61.021.421.81-0.180.433787 lbf (3.5 kN)787 lbf (3.5 kN)
1.261.26M 80.791.381.772.280.240.434787 lbf (3.5 kN)1574 lbf (7 kN)
1.261.26M 101.341.732.242.910.310.435787 lbf (3.5 kN)2473 lbf (11 kN)
1.261.26M 121.342.242.913.700.370.436787 lbf (3.5 kN)3597 lbf (16 kN)
1.571.57M 80.791.381.772.280.240.514787 lbf (3.5 kN)1574 lbf (7 kN)
1.571.57M 101.341.732.242.910.310.515787 lbf (3.5 kN)2473 lbf (11 kN)
1.571.57M 121.342.242.913.700.370.516787 lbf (3.5 kN)3597 lbf (16 kN)
1.971.97M 80.791.381.772.280.240.614787 lbf (3.5 kN)1574 lbf (7 kN)
1.971.97M 101.341.732.242.910.310.615787 lbf (3.5 kN)2473 lbf (11 kN)
1.971.97M 121.342.242.913.700.370.616787 lbf (3.5 kN)3597 lbf (16 kN)

Build & Price

3D Product Configurator
Outer diameter d1 (Type NI)
Outer diameter d1 (Type NV)
Thread d2

Inch


Metric


Stud length l1
Material


Selected Part

Total US Dollars (net)
$3.02
In stock: 11
In Stock
Please note our quantity discounts (US Dollars).
MinMaxPrice
1249$3.02
250499$2.77
500999$2.52
≥ 1000$2.27
Prop 65: Not compliant
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov
RoHS: Compliant
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Weight: -
If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 800-877-8351
All Prices are in US Dollars. Taxes Not Included.

CAD Download

Email CAD File

To receive an email with a CAD download without creating an account, please enter your e-mail address. Max of 3 CAD files per day unless you create an account.

Please enter the code you can find in the picture.



About CAD Downloads
Save as Favorites

Please enter the code you can find in the picture.

Need Help?

Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM Central Time: 800-877-8351

Special Requests | Contact our sales team

This could also be interesting...

JW Winco - Contact

United States
E-Mail: sales@jwwinco.com
Phone: +1-800-877-8351

Hours M-F 7:30 AM - 5:00 PM CT

Request Callback:

Privacy Policy

Request a Catalog

Request one of our many catalogs! For an overview of our products request the Product Overview Catalog (POC).

Request Free Catalogs

Sales Contacts

You are looking for a Winco partner near you? Please select the country.