Install the handwheel to the spindle and fasten it with the grub screw or keyway/countersunk washer.
Turn the spindle to the starting point (0 position).
Move position indicator "by hand“ to the 0 position before mounting it.
Install the position indicator into the recess of the hub and fasten it with a screw.
Do not apply unnecessarily excessive torque to avoid deformation of the housing!
Check by turning the hand knob to ensure that the starting position of the spindle coincides with the 0 position of the two pointers (Position Indicators EN 000.8) or respectively pointer and counter (Position Indicators EN 000.3). If necessary, take out and readjust the position indicator.
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Weight: 0.445 lbs
If weight is not listed, please contact our Sales Department for additional information regarding weight. Phone: 800-877-8351
