Solid Disk Handwheels GN 323.9

Product description

Information

These solid disk handwheels EN 323.9 have a recess in the hub to accept position indicators EN 000.9 or EN 000.13.

The pallet pin is screwed in and held in position with the hex lock nut.

The length of the locating pin l₅ can be adjusted as required.

Specification

Wheel body
Aluminum

Hub machined
Rim
- Turned on all sides
- Radial and axial runout IT12
Powder coated
Black, textured finish

Gear wheel
Plastic, Polyamide (PA)
Glass fiber reinforced

Screw for pallet pin
Steel blackened finish, injected

Revolving handle GN 798
Plastic, Polyamide (PA)

Black, matte finish
Steel spindle
Zinc plated, blue passivated finish

RoHS

Accessory

Position Indicators EN 000.9 (Positive Drive, with Analog Display)
Position Indicators EN 000.13 (Positive Drive, with Digital / Analog Display)
Countersunk Washers GN 184 (for Axial Fixing)

Build & Price

Part Number B - Without keyway	Part Number K - With keyway	d₁	d₂ H7 Bore	d₃	d₄	d₅	d₆	a	b	l₁	l₂ ≈	l₃	l₄	l₅	Handle	For position indicators EN 000.9 Size	EN 000.13 Size

323.9-80-B10-A	323.9-80-K10-A	3.15	0.394 H7	0.79	0.81	0.24	2.20	0.75	0.51	0.89	2.17	0.14	0.45	0.54	0.63	1.65	-
323.9-100-B10-A	323.9-100-K10-A	3.94	0.394 H7	0.79	0.81	0.24	2.20	0.75	0.55	0.89	2.50	0.14	0.45	0.54	0.71	1.65	-
323.9-125-B12-A	323.9-125-K12-A	4.92	0.472 H7	1.26	0.89	0.24	2.99	1.12	0.59	0.89	2.58	0.16	0.47	0.52	0.87	2.36	2.36
323.9-160-B14-A	323.9-160-K14-A	6.30	0.551 H7	1.26	1.00	0.24	3.07	1.12	0.71	0.93	2.81	0.16	0.51	0.48	0.94	2.36	2.36

Part Number B - Without keyway	Part Number K - With keyway	d₁	d₂ H7 Bore	d₃	d₄	d₅	d₆	a	b	l₁	l₂ ≈	l₃	l₄	l₅	Handle	For position indicators EN 000.9 Size	EN 000.13 Size

323.9-80-B10-R	323.9-80-K10-R	3.15	0.394 H7	0.79	0.81	0.24	2.20	0.75	0.51	0.89	2.17	0.14	0.45	0.54	0.63	1.65	-
323.9-100-B10-R	323.9-100-K10-R	3.94	0.394 H7	0.79	0.81	0.24	2.20	0.75	0.55	0.89	2.50	0.14	0.45	0.54	0.71	1.65	-
323.9-125-B12-R	323.9-125-K12-R	4.92	0.472 H7	1.26	0.89	0.24	2.99	1.12	0.59	0.89	2.58	0.16	0.47	0.52	0.87	2.36	2.36
323.9-160-B14-R	323.9-160-K14-R	6.30	0.551 H7	1.26	1.00	0.24	3.07	1.12	0.71	0.93	2.81	0.16	0.51	0.48	0.94	2.36	2.36

d₁	d₂ H7 Bore	d₃	d₄	d₅	d₆	a	b	l₁	l₂ ≈	l₃	l₄	l₅	Handle	For position indicators EN 000.9 Size	EN 000.13 Size

3.15	0.394	0.79	0.81	0.24	2.20	0.75	0.51	0.89	2.17	0.14	0.45	0.54	0.63	1.65	-
3.94	0.394	0.79	0.81	0.24	2.20	0.75	0.55	0.89	2.50	0.14	0.45	0.54	0.71	1.65	-
4.92	0.472	1.26	0.89	0.24	2.99	1.12	0.59	0.89	2.58	0.16	0.47	0.52	0.87	2.36	2.36
6.30	0.551	1.26	1.00	0.24	3.07	1.12	0.71	0.93	2.81	0.16	0.51	0.48	0.94	2.36	2.36

3D Product Configurator

Installation Instructions

Turn spindle into the starting position (0 position).
Set the length of the pallet pin and lock in place with hex nut. Make sure that the pin does not sit on the drill hole base after mounting the handwheel.
Move the position indicator to the 0 position by turning the outer gear wheel.
Hold the (unmounted) handwheel such that the hole for the gear pinion is in the “12 o‘clock“ position and turn the crown wheel until the pallet pin is in the recess bore at the machine body.
Carefully insert the position indicator into the hand knob, making sure that the gear pinion engages in the crown wheel. The crown wheel may need to be readjusted slightly during this step. Secure the position indicator with the set screw, avoiding excessive tightening torque to prevent the housing from deforming.
Place the handwheel onto the spindle and fix in place with the set screw.

7.Check by turning the handwheel to ensure that the starting position of the spindle and the 0 position of both pointers coincide.

If necessary, take out and readjust the position indicator.

GN 110 Cross Holes (Special Order) - Metric

Show / Hide columns

d₁ / s	d₁ / s	d₂ H11	d₃ Thread	Length l Standard version	Length l Handwheels DIN 950 / GN 949 up to Ø 250 mm

6	7	2.5	M 3	4.5	-
8	9	3	M 5	5.5	4.5
10	11	3	M 5	5.5	4.5
12	13	4	M 6	6.5	5.5
14	15	4	M 6	6.5	5.5
16	17	5	M 6	8	7
18	19	5	M 6	8	7
20	21	5	M 6	8	7
22	23	6	M 6	10	9
24	25	6	M 6	10	9
26	27	6	M 6	10	9

The connection between the operating element and the shaft is often made by a cross pin or a grub screw. As a result, the user is faced with relatively high assembly costs since cross holes on operating elements are usually not readily available. Components with cross holes according to GN 110 are not only manufactured and supplied at very competitive prices but there is also no need for time-consuming design drawings. However, the geometrical shape of some operating elements does not allow the use of this standard. The d₂ pin hole is intended for use with a spring pin.

To order cross hole GN 110, please call our sales team:
USA: +1-800-877-8351
Mexico: +52(81)2721-4021
Canada: +1-800-397-6993

GN 110 Cross Holes (Special Order) - Inch

Show / Hide columns

d₁ / s	d₂ +0.003/-0.001	d₃ Thread	Length l

1/4	3/32	6x32	0.188
5/16	1/8	10x32	0.2
3/8	1/8	10x32	0.2
1/2	5/32	1/4x20	0.25
9/16	5/32	1/4x20	0.25
5/8	3/16	1/4x20	0.312
11/16	3/16	1/4x20	0.312
3/4	3/16	1/4x20	0.312
13/16	1/4	1/4x20	0.375
1	1/4	5/16x18	0.375
1 1/16	1/4	5/16x18	0.375
1 1/18	1/4	5/16x18	0.375
1 1/14	1/4	5/16x18	0.375

To order cross hole GN 110, please call our sales team:
USA: +1-800-877-8351
Mexico: +52(81)2721-4021
Canada: +1-800-397-6993

Selected Part

Part Number

Total US Dollars (net)

$84.39

Call / Email for Delivery Time

Quantity

Please note our quantity discounts (US Dollars).

Min	Max	Price
1	49	$84.39
50	99	$77.36
100	249	$70.33
≥ 250		$63.29

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.588 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 800-877-8351

All Prices are in US Dollars. Taxes Not Included.