With GN 2181 edge protection seal profile corners, right-angle sealing paths can be quickly and easily implemented without a minimum laying radius or manual "free-cutting” of the profile. The corner joint is sealed and firmly adhered by vulcanization.
The leg length l can be shortened or extended with the corresponding profile of GN 2180. Installed “compressed” with an excess dimension of about 1% of the total length, the joints fit tightly and do not require adhesive.
During operation, the profile must experience deformation to dimension w2 in order to ensure an optimal sealing effect.
The profiles made of NBR are intended for uses in contact with oils, fuels or lubricants.
The EPDM versions are made of UL 50 and UL 94-HB certified edge protector sealing profiles and are therefore approved for the US American and the Canadian market.
RoHS compliant
| A | Upper seal profile |
| D | Side seal profile |
| h1 Type A | h1 Type D | Length l | a Clamping range in millimeters | b | h2 | h3 | h4 | k | w1 | w2 At up to 50 % permissible deformation | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.81 | - | 6.30 ±0.079 | 9.84 ±0.098 | 15.75 ±0.126 | 24.80 ±0.157 | 1 - 3.5 | 0.43 | 0.41 | - | - | - | 0.39 | 0.28 |
| - | 0.51 | 6.30 ±0.079 | 9.84 ±0.098 | 15.75 ±0.126 | 24.80 ±0.157 | 1 - 3.5 | 0.43 | 0.42 | 0.09 | 0.18 | 0.19 | 0.46 | 0.34 |
|
| Min | Max | Price |
|---|---|---|
| 1 | 99 | $21.21 |
| 100 | 249 | $19.44 |
| 250 | 499 | $17.68 |
| ≥ 500 | $15.91 |
Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM Central Time: 800-877-8351
