Fluid Fill Plugs EN 747

Product description

The dipstick of fluid fill plugs EN 747 has two flat sides on which the MIN-MAX markings can easily be applied (see GN 109).

Body
Plastic
Technopolymer (Polyamide PA)

Seal
Rubber NBR (Perbunan^®)

Dipstick
Steel, phosphate-treated

RoHS

Fluid level markings / special lengths
see GN 109

Build & Price

Part Number 1 - Without vent hole	Part Number 2 - With vent hole	d₁ Pipe thread	Fine thread	d₂ Vent hole	d₃	e₁ ≈	l₁	l₂	l₃	s₁

3PLE0	3PLE1	1/4 NPT	-	0.08	0.59	0.85	0.35	0.63	-	0.75
6PLE0	6PLE1	3/8 NPT	-	0.08	0.67	0.98	0.35	0.63	-	0.87
8PLE0	8PLE1	1/2 NPT	-	0.08	0.81	1.16	0.43	0.71	-	1.02
11PLE0	11PLE1	3/4 NPT	-	0.08	0.98	1.44	0.47	0.79	-	1.26
181GLE0	181GLE1	G 1/8	-	0.08	0.59	0.85	0.35	0.63	4.72	0.75
747-M10X1.5-A-1	747-M10X1.5-A-2	-	M 10 x 1.5	0.08	0.59	0.85	0.35	0.63	4.72	0.75
747-M12X1.5-A-1	747-M12X1.5-A-2	-	M 12 x 1.5	0.08	0.59	0.85	0.35	0.63	4.72	0.75
251GLE0	251GLE1	G 1/4	-	0.08	0.59	0.85	0.35	0.63	4.72	0.75
747-M14X1.5-A-1	747-M14X1.5-A-2	-	M 14 x 1.5	0.08	0.59	0.85	0.35	0.63	4.72	0.75
747-M16X1.5-A-1	747-M16X1.5-A-2	-	M 16 x 1.5	0.08	0.67	0.98	0.35	0.63	4.72	0.87
38GLE0	38GLE1	G 3/8	-	0.08	0.67	0.98	0.35	0.63	4.72	0.87
50GLE0	50GLE1	G 1/2	-	0.08	0.81	1.16	0.43	0.71	7.68	1.02
747-M18X1.5-A-1	747-M18X1.5-A-2	-	M 18 x 1.5	0.08	0.81	1.16	0.43	0.71	7.68	1.02
747-M20X1.5-A-1	747-M20X1.5-A-2	-	M 20 x 1.5	0.08	0.81	1.16	0.43	0.71	7.68	1.02
75GLE0	75GLE1	G 3/4	-	0.08	0.98	1.44	0.47	0.79	7.68	1.26
747-M22X1.5-A-1	747-M22X1.5-A-2	-	M 22 x 1.5	0.08	0.98	1.44	0.47	0.79	7.68	1.26
747-M25X1.5-A-1	747-M25X1.5-A-2	-	M 25 x 1.5	0.08	0.98	1.44	0.47	0.79	7.68	1.26
747-M26X1.5-A-1	747-M26X1.5-A-2	-	M 26 x 1.5	0.08	0.98	1.44	0.47	0.79	7.68	1.26
1GLE0	1GLE1	G 1	-	0.08	1.22	1.73	0.51	0.87	7.68	1.50
747-M35X1.5-A-1	747-M35X1.5-A-2	-	M 35 x 1.5	0.08	1.22	1.73	0.51	0.87	7.68	1.50
747-G11/4-A-1	747-G11/4-A-2	G 1 1/4	-	0.08	1.50	2.07	0.55	0.94	7.68	1.81
747-M40X1.5-A-1	747-M40X1.5-A-2	-	M 40 x 1.5	0.08	1.50	2.07	0.55	0.94	7.68	1.81
747-G11/2-A-1	747-G11/2-A-2	G 1 1/2	-	0.08	1.81	2.48	0.59	1.02	7.68	2.17

Part Number 1 - Without vent hole	Part Number 2 - With vent hole	d₁ Pipe thread	Fine thread	d₂ Vent hole	d₃	e₁ ≈	l₁	l₂	l₃	s₁

747-G1/8-B-1		G 1/8	-	0.08	0.59	0.85	0.35	0.63	4.72	0.75
747-M10X1.5-B-1		-	M 10 x 1.5	0.08	0.59	0.85	0.35	0.63	4.72	0.75
747-M12X1.5-B-1		-	M 12 x 1.5	0.08	0.59	0.85	0.35	0.63	4.72	0.75
747-G1/4-B-1		G 1/4	-	0.08	0.59	0.85	0.35	0.63	4.72	0.75
747-M14X1.5-B-1		-	M 14 x 1.5	0.08	0.59	0.85	0.35	0.63	4.72	0.75
747-M16X1.5-B-1	747-M16X1.5-B-2	-	M 16 x 1.5	0.08	0.67	0.98	0.35	0.63	4.72	0.87
747-G3/8-B-1	38GLE2	G 3/8	-	0.08	0.67	0.98	0.35	0.63	4.72	0.87
747-G1/2-B-1	747-G1/2-B-2	G 1/2	-	0.08	0.81	1.16	0.43	0.71	7.68	1.02
747-M18X1.5-B-1	747-M18X1.5-B-2	-	M 18 x 1.5	0.08	0.81	1.16	0.43	0.71	7.68	1.02
747-M20X1.5-B-1	747-M20X1.5-B-2	-	M 20 x 1.5	0.08	0.81	1.16	0.43	0.71	7.68	1.02
747-G3/4-B-1	747-G3/4-B-2	G 3/4	-	0.08	0.98	1.44	0.47	0.79	7.68	1.26
747-M22X1.5-B-1	747-M22X1.5-B-2	-	M 22 x 1.5	0.08	0.98	1.44	0.47	0.79	7.68	1.26
747-M25X1.5-B-1	747-M25X1.5-B-2	-	M 25 x 1.5	0.08	0.98	1.44	0.47	0.79	7.68	1.26
747-M26X1.5-B-1	747-M26X1.5-B-2	-	M 26 x 1.5	0.08	0.98	1.44	0.47	0.79	7.68	1.26
747-G1-B-1	747-G1-B-2	G 1	-	0.08	1.22	1.73	0.51	0.87	7.68	1.50
747-M35X1.5-B-1	747-M35X1.5-B-2	-	M 35 x 1.5	0.08	1.22	1.73	0.51	0.87	7.68	1.50
747-G11/4-B-1	747-G11/4-B-2	G 1 1/4	-	0.08	1.50	2.07	0.55	0.94	7.68	1.81
747-M40X1.5-B-1	747-M40X1.5-B-2	-	M 40 x 1.5	0.08	1.50	2.07	0.55	0.94	7.68	1.81
747-G11/2-B-1	747-G11/2-B-2	G 1 1/2	-	0.08	1.81	2.48	0.59	1.02	7.68	2.17

d₁ Pipe thread	Fine thread	d₂ Vent hole	d₃	e₁ ≈	l₁	l₂	l₃	s₁

1/4 NPT**	-	0.08	0.59	0.85	0.35	0.63	-	0.75
3/8 NPT**	-	0.08	0.67	0.98	0.35	0.63	-	0.87
1/2 NPT**	-	0.08	0.81	1.16	0.43	0.71	-	1.02
3/4 NPT**	-	0.08	0.98	1.44	0.47	0.79	-	1.26

d₁ Pipe thread	Fine thread	d₂ Vent hole	d₃	e₁ ≈	l₁	l₂	l₃	s₁

G 1/8*	M 10 x 1.5*	M 12 x 1.5*	-	0.08	0.59	0.85	0.35	0.63	4.72	0.75
G 1/4*	M 14 x 1.5*	-	-	0.08	0.59	0.85	0.35	0.63	4.72	0.75
G 3/8	M 16 x 1.5	-	-	0.08	0.67	0.98	0.35	0.63	4.72	0.87
G 1/2	M 18 x 1.5	M 20 x 1.5	-	0.08	0.81	1.16	0.43	0.71	7.68	1.02
G 3/4	M 22 x 1.5	M 25 x 1.5	M 26 x 1.5	0.08	0.98	1.44	0.47	0.79	7.68	1.26
G 1	M 35 x 1.5	-	-	0.08	1.22	1.73	0.51	0.87	7.68	1.50
G 1 1/4	M 40 x 1.5	-	-	0.08	1.50	2.07	0.55	0.94	7.68	1.81
G 1 1/2	-	-	-	0.08	1.81	2.48	0.59	1.02	7.68	2.17

3D Product Configurator

GN 109 Fluid Level Markings / Special Lengths (Special Order)



For the series with dipstick shown above, a shortening and / or the attachment of level markings can be ordered with the service GN 109. The dipstick is shortened to the length l₁ and the marking notches are milled at l₂ or l₃, making them easily visible. The max. length l₁ is specified in the respective series. The length specifications l₁ to l₃ refer to the contact surface without seal, with a tolerance of ±1 mm to be taken into account. For critical applications, the seal must be taken into consideration with a thickness of up to 2 mm, depending on the series. If required, more than 2 notches may be inserted on request, which are then specified by appropriate details on the position (l₄ ... l_x). Furthermore, texts such as MAX / MIN may be laser-engraved in addition to or instead of the notches by submitting the appropriate template. The fluid level markings / special lengths GN 109 are to be ordered as a separate item in shopping cart step 1 under note.