GN 2241 Elastomer Jaw Couplings Aluminum, Hub with Set Screw, with Metric-Inch Bores

Elastomer Jaw Couplings GN 2241: Aluminum, Hub with Set Screw, with Metric-Inch Bores

Bore code: B - Without keyway
Hardness: BS - 80 Shore A, blue

Keyways WN 6885 / DIN 6885-1 Plastic Characteristics Highlights - Couplings

Product description

Elastomer jaw couplings GN 2241 can transmit very high torques while compensating for shaft misalignments and runout tolerances. They are preferred in applications where the focus lies on pure torque and power transmission.

The choice of three coupling spiders with different hardness values allows the properties of the coupling to be optimally matched to the specific requirements. The use of set screws for clamping and the simple plug-in installation make jaw couplings very easy to assemble.

With the bore code K, the keyway is always integrated into both bores d₂ and d₃.

Specification

Hub
AluminumAL
Anodized finish, natural color

Coupling spider
Thermoplastic polyurethane (TPU)

Operating temperature
-4 °F up to +140 °F (-20 °C up to +60 °C)
Hardness
- 80 Shore A, blueBS
- 92 Shore A, whiteWS
- 98 Shore A, redRS

Set screws

Steel, blackened finish
For d₂ / d₃ ≤ 4, one set screw
For d₂ / d₃ > 4, two set screws

RoHS

Accessory

Coupling Spiders GN 2240.1

GN 2241 Aluminum Elastomer Jaw Couplings, Hub with Set Screw, with Metric-Inch Bores sketch

Hide technical drawing

Part Options / Table

Bore code

B	Without keyway
K	With keyway (from d₁ = 30 mm)

Part Number	d₁	d₂ - d₃ H8 Bore Recommended shaft tolerance h7

2241-14-B3-3/16-AL-BS	0.55	3-3/16 H8 / h7	3-1/4	4-3/16	4-1/4	5-3/16	5-1/4	6-3/16	6-1/4	-	-	-	-	-	-	-	-
2241-14-B3-3/16-AL-WS	0.55	3-3/16 H8 / h7	3-1/4	4-3/16	4-1/4	5-3/16	5-1/4	6-3/16	6-1/4	-	-	-	-	-	-	-	-
2241-14-B3-3/16-AL-RS	0.55	3-3/16 H8 / h7	3-1/4	4-3/16	4-1/4	5-3/16	5-1/4	6-3/16	6-1/4	-	-	-	-	-	-	-	-
2241-14-B3-1/4-AL-BS	0.55	3-3/16 H8 / h7	3-1/4	4-3/16	4-1/4	5-3/16	5-1/4	6-3/16	6-1/4	-	-	-	-	-	-	-	-
2241-14-B3-1/4-AL-WS	0.55	3-3/16 H8 / h7	3-1/4	4-3/16	4-1/4	5-3/16	5-1/4	6-3/16	6-1/4	-	-	-	-	-	-	-	-
2241-14-B3-1/4-AL-RS	0.55	3-3/16 H8 / h7	3-1/4	4-3/16	4-1/4	5-3/16	5-1/4	6-3/16	6-1/4	-	-	-	-	-	-	-	-
2241-14-B4-3/16-AL-BS	0.55	3-3/16 H8 / h7	3-1/4	4-3/16	4-1/4	5-3/16	5-1/4	6-3/16	6-1/4	-	-	-	-	-	-	-	-
2241-14-B4-3/16-AL-WS	0.55	3-3/16 H8 / h7	3-1/4	4-3/16	4-1/4	5-3/16	5-1/4	6-3/16	6-1/4	-	-	-	-	-	-	-	-
2241-14-B4-3/16-AL-RS	0.55	3-3/16 H8 / h7	3-1/4	4-3/16	4-1/4	5-3/16	5-1/4	6-3/16	6-1/4	-	-	-	-	-	-	-	-
2241-14-B4-1/4-AL-BS	0.55	3-3/16 H8 / h7	3-1/4	4-3/16	4-1/4	5-3/16	5-1/4	6-3/16	6-1/4	-	-	-	-	-	-	-	-
2241-14-B4-1/4-AL-WS	0.55	3-3/16 H8 / h7	3-1/4	4-3/16	4-1/4	5-3/16	5-1/4	6-3/16	6-1/4	-	-	-	-	-	-	-	-
2241-14-B4-1/4-AL-RS	0.55	3-3/16 H8 / h7	3-1/4	4-3/16	4-1/4	5-3/16	5-1/4	6-3/16	6-1/4	-	-	-	-	-	-	-	-
2241-14-B5-3/16-AL-BS	0.55	3-3/16 H8 / h7	3-1/4	4-3/16	4-1/4	5-3/16	5-1/4	6-3/16	6-1/4	-	-	-	-	-	-	-	-
2241-14-B5-3/16-AL-WS	0.55	3-3/16 H8 / h7	3-1/4	4-3/16	4-1/4	5-3/16	5-1/4	6-3/16	6-1/4	-	-	-	-	-	-	-	-
2241-14-B5-3/16-AL-RS	0.55	3-3/16 H8 / h7	3-1/4	4-3/16	4-1/4	5-3/16	5-1/4	6-3/16	6-1/4	-	-	-	-	-	-	-	-
2241-14-B5-1/4-AL-BS	0.55	3-3/16 H8 / h7	3-1/4	4-3/16	4-1/4	5-3/16	5-1/4	6-3/16	6-1/4	-	-	-	-	-	-	-	-
2241-14-B5-1/4-AL-WS	0.55	3-3/16 H8 / h7	3-1/4	4-3/16	4-1/4	5-3/16	5-1/4	6-3/16	6-1/4	-	-	-	-	-	-	-	-
2241-14-B5-1/4-AL-RS	0.55	3-3/16 H8 / h7	3-1/4	4-3/16	4-1/4	5-3/16	5-1/4	6-3/16	6-1/4	-	-	-	-	-	-	-	-
2241-14-B6-3/16-AL-BS	0.55	3-3/16 H8 / h7	3-1/4	4-3/16	4-1/4	5-3/16	5-1/4	6-3/16	6-1/4	-	-	-	-	-	-	-	-
2241-14-B6-3/16-AL-WS	0.55	3-3/16 H8 / h7	3-1/4	4-3/16	4-1/4	5-3/16	5-1/4	6-3/16	6-1/4	-	-	-	-	-	-	-	-
2241-14-B6-3/16-AL-RS	0.55	3-3/16 H8 / h7	3-1/4	4-3/16	4-1/4	5-3/16	5-1/4	6-3/16	6-1/4	-	-	-	-	-	-	-	-
2241-14-B6-1/4-AL-BS	0.55	3-3/16 H8 / h7	3-1/4	4-3/16	4-1/4	5-3/16	5-1/4	6-3/16	6-1/4	-	-	-	-	-	-	-	-
2241-14-B6-1/4-AL-WS	0.55	3-3/16 H8 / h7	3-1/4	4-3/16	4-1/4	5-3/16	5-1/4	6-3/16	6-1/4	-	-	-	-	-	-	-	-
2241-14-B6-1/4-AL-RS	0.55	3-3/16 H8 / h7	3-1/4	4-3/16	4-1/4	5-3/16	5-1/4	6-3/16	6-1/4	-	-	-	-	-	-	-	-
2241-20-B5-3/16-AL-BS	0.79	5-3/16 H8 / h7	5-1/4	5-5/16	5-3/8	6-3/16	6-1/4	6-5/16	6-3/8	8-3/16	8-1/4	8-5/16	8-3/8	-	-	-	-
2241-20-B5-3/16-AL-WS	0.79	5-3/16 H8 / h7	5-1/4	5-5/16	5-3/8	6-3/16	6-1/4	6-5/16	6-3/8	8-3/16	8-1/4	8-5/16	8-3/8	-	-	-	-
2241-20-B5-3/16-AL-RS	0.79	5-3/16 H8 / h7	5-1/4	5-5/16	5-3/8	6-3/16	6-1/4	6-5/16	6-3/8	8-3/16	8-1/4	8-5/16	8-3/8	-	-	-	-
2241-20-B5-1/4-AL-BS	0.79	5-3/16 H8 / h7	5-1/4	5-5/16	5-3/8	6-3/16	6-1/4	6-5/16	6-3/8	8-3/16	8-1/4	8-5/16	8-3/8	-	-	-	-
2241-20-B5-1/4-AL-WS	0.79	5-3/16 H8 / h7	5-1/4	5-5/16	5-3/8	6-3/16	6-1/4	6-5/16	6-3/8	8-3/16	8-1/4	8-5/16	8-3/8	-	-	-	-
2241-20-B5-1/4-AL-RS	0.79	5-3/16 H8 / h7	5-1/4	5-5/16	5-3/8	6-3/16	6-1/4	6-5/16	6-3/8	8-3/16	8-1/4	8-5/16	8-3/8	-	-	-	-
2241-20-B5-5/16-AL-BS	0.79	5-3/16 H8 / h7	5-1/4	5-5/16	5-3/8	6-3/16	6-1/4	6-5/16	6-3/8	8-3/16	8-1/4	8-5/16	8-3/8	-	-	-	-
2241-20-B5-5/16-AL-WS	0.79	5-3/16 H8 / h7	5-1/4	5-5/16	5-3/8	6-3/16	6-1/4	6-5/16	6-3/8	8-3/16	8-1/4	8-5/16	8-3/8	-	-	-	-
2241-20-B5-5/16-AL-RS	0.79	5-3/16 H8 / h7	5-1/4	5-5/16	5-3/8	6-3/16	6-1/4	6-5/16	6-3/8	8-3/16	8-1/4	8-5/16	8-3/8	-	-	-	-
2241-20-B5-3/8-AL-BS	0.79	5-3/16 H8 / h7	5-1/4	5-5/16	5-3/8	6-3/16	6-1/4	6-5/16	6-3/8	8-3/16	8-1/4	8-5/16	8-3/8	-	-	-	-
2241-20-B5-3/8-AL-WS	0.79	5-3/16 H8 / h7	5-1/4	5-5/16	5-3/8	6-3/16	6-1/4	6-5/16	6-3/8	8-3/16	8-1/4	8-5/16	8-3/8	-	-	-	-
2241-20-B5-3/8-AL-RS	0.79	5-3/16 H8 / h7	5-1/4	5-5/16	5-3/8	6-3/16	6-1/4	6-5/16	6-3/8	8-3/16	8-1/4	8-5/16	8-3/8	-	-	-	-
2241-20-B6-3/16-AL-BS	0.79	5-3/16 H8 / h7	5-1/4	5-5/16	5-3/8	6-3/16	6-1/4	6-5/16	6-3/8	8-3/16	8-1/4	8-5/16	8-3/8	-	-	-	-
2241-20-B6-3/16-AL-WS	0.79	5-3/16 H8 / h7	5-1/4	5-5/16	5-3/8	6-3/16	6-1/4	6-5/16	6-3/8	8-3/16	8-1/4	8-5/16	8-3/8	-	-	-	-
2241-20-B6-3/16-AL-RS	0.79	5-3/16 H8 / h7	5-1/4	5-5/16	5-3/8	6-3/16	6-1/4	6-5/16	6-3/8	8-3/16	8-1/4	8-5/16	8-3/8	-	-	-	-
2241-20-B6-1/4-AL-BS	0.79	5-3/16 H8 / h7	5-1/4	5-5/16	5-3/8	6-3/16	6-1/4	6-5/16	6-3/8	8-3/16	8-1/4	8-5/16	8-3/8	-	-	-	-
2241-20-B6-1/4-AL-WS	0.79	5-3/16 H8 / h7	5-1/4	5-5/16	5-3/8	6-3/16	6-1/4	6-5/16	6-3/8	8-3/16	8-1/4	8-5/16	8-3/8	-	-	-	-
2241-20-B6-1/4-AL-RS	0.79	5-3/16 H8 / h7	5-1/4	5-5/16	5-3/8	6-3/16	6-1/4	6-5/16	6-3/8	8-3/16	8-1/4	8-5/16	8-3/8	-	-	-	-
2241-20-B6-5/16-AL-BS	0.79	5-3/16 H8 / h7	5-1/4	5-5/16	5-3/8	6-3/16	6-1/4	6-5/16	6-3/8	8-3/16	8-1/4	8-5/16	8-3/8	-	-	-	-
2241-20-B6-5/16-AL-WS	0.79	5-3/16 H8 / h7	5-1/4	5-5/16	5-3/8	6-3/16	6-1/4	6-5/16	6-3/8	8-3/16	8-1/4	8-5/16	8-3/8	-	-	-	-
2241-20-B6-5/16-AL-RS	0.79	5-3/16 H8 / h7	5-1/4	5-5/16	5-3/8	6-3/16	6-1/4	6-5/16	6-3/8	8-3/16	8-1/4	8-5/16	8-3/8	-	-	-	-
2241-20-B6-3/8-AL-BS	0.79	5-3/16 H8 / h7	5-1/4	5-5/16	5-3/8	6-3/16	6-1/4	6-5/16	6-3/8	8-3/16	8-1/4	8-5/16	8-3/8	-	-	-	-
2241-20-B6-3/8-AL-WS	0.79	5-3/16 H8 / h7	5-1/4	5-5/16	5-3/8	6-3/16	6-1/4	6-5/16	6-3/8	8-3/16	8-1/4	8-5/16	8-3/8	-	-	-	-
2241-20-B6-3/8-AL-RS	0.79	5-3/16 H8 / h7	5-1/4	5-5/16	5-3/8	6-3/16	6-1/4	6-5/16	6-3/8	8-3/16	8-1/4	8-5/16	8-3/8	-	-	-	-
2241-20-B8-3/16-AL-BS	0.79	5-3/16 H8 / h7	5-1/4	5-5/16	5-3/8	6-3/16	6-1/4	6-5/16	6-3/8	8-3/16	8-1/4	8-5/16	8-3/8	-	-	-	-
2241-20-B8-3/16-AL-WS	0.79	5-3/16 H8 / h7	5-1/4	5-5/16	5-3/8	6-3/16	6-1/4	6-5/16	6-3/8	8-3/16	8-1/4	8-5/16	8-3/8	-	-	-	-
2241-20-B8-3/16-AL-RS	0.79	5-3/16 H8 / h7	5-1/4	5-5/16	5-3/8	6-3/16	6-1/4	6-5/16	6-3/8	8-3/16	8-1/4	8-5/16	8-3/8	-	-	-	-
2241-20-B8-1/4-AL-BS	0.79	5-3/16 H8 / h7	5-1/4	5-5/16	5-3/8	6-3/16	6-1/4	6-5/16	6-3/8	8-3/16	8-1/4	8-5/16	8-3/8	-	-	-	-
2241-20-B8-1/4-AL-WS	0.79	5-3/16 H8 / h7	5-1/4	5-5/16	5-3/8	6-3/16	6-1/4	6-5/16	6-3/8	8-3/16	8-1/4	8-5/16	8-3/8	-	-	-	-
2241-20-B8-1/4-AL-RS	0.79	5-3/16 H8 / h7	5-1/4	5-5/16	5-3/8	6-3/16	6-1/4	6-5/16	6-3/8	8-3/16	8-1/4	8-5/16	8-3/8	-	-	-	-
2241-20-B8-5/16-AL-BS	0.79	5-3/16 H8 / h7	5-1/4	5-5/16	5-3/8	6-3/16	6-1/4	6-5/16	6-3/8	8-3/16	8-1/4	8-5/16	8-3/8	-	-	-	-
2241-20-B8-5/16-AL-WS	0.79	5-3/16 H8 / h7	5-1/4	5-5/16	5-3/8	6-3/16	6-1/4	6-5/16	6-3/8	8-3/16	8-1/4	8-5/16	8-3/8	-	-	-	-
2241-20-B8-5/16-AL-RS	0.79	5-3/16 H8 / h7	5-1/4	5-5/16	5-3/8	6-3/16	6-1/4	6-5/16	6-3/8	8-3/16	8-1/4	8-5/16	8-3/8	-	-	-	-
2241-20-B8-3/8-AL-BS	0.79	5-3/16 H8 / h7	5-1/4	5-5/16	5-3/8	6-3/16	6-1/4	6-5/16	6-3/8	8-3/16	8-1/4	8-5/16	8-3/8	-	-	-	-
2241-20-B8-3/8-AL-WS	0.79	5-3/16 H8 / h7	5-1/4	5-5/16	5-3/8	6-3/16	6-1/4	6-5/16	6-3/8	8-3/16	8-1/4	8-5/16	8-3/8	-	-	-	-
2241-20-B8-3/8-AL-RS	0.79	5-3/16 H8 / h7	5-1/4	5-5/16	5-3/8	6-3/16	6-1/4	6-5/16	6-3/8	8-3/16	8-1/4	8-5/16	8-3/8	-	-	-	-
2241-30-B8-5/16-AL-BS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K8-5/16-AL-BS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B8-5/16-AL-WS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K8-5/16-AL-WS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B8-5/16-AL-RS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K8-5/16-AL-RS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B8-3/8-AL-BS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K8-3/8-AL-BS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B8-3/8-AL-WS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K8-3/8-AL-WS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B8-3/8-AL-RS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K8-3/8-AL-RS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B8-1/2-AL-BS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K8-1/2-AL-BS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B8-1/2-AL-WS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K8-1/2-AL-WS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B8-1/2-AL-RS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K8-1/2-AL-RS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B8-5/8-AL-BS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K8-5/8-AL-BS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B8-5/8-AL-WS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K8-5/8-AL-WS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B8-5/8-AL-RS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K8-5/8-AL-RS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B10-5/16-AL-BS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K10-5/16-AL-BS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B10-5/16-AL-WS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K10-5/16-AL-WS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B10-5/16-AL-RS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K10-5/16-AL-RS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B10-3/8-AL-BS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K10-3/8-AL-BS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B10-3/8-AL-WS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K10-3/8-AL-WS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B10-3/8-AL-RS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K10-3/8-AL-RS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B10-1/2-AL-BS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K10-1/2-AL-BS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B10-1/2-AL-WS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K10-1/2-AL-WS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B10-1/2-AL-RS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K10-1/2-AL-RS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B10-5/8-AL-BS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K10-5/8-AL-BS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B10-5/8-AL-WS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K10-5/8-AL-WS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B10-5/8-AL-RS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K10-5/8-AL-RS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B12-5/16-AL-BS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K12-5/16-AL-BS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B12-5/16-AL-WS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K12-5/16-AL-WS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B12-5/16-AL-RS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K12-5/16-AL-RS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B12-3/8-AL-BS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K12-3/8-AL-BS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B12-3/8-AL-WS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K12-3/8-AL-WS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B12-3/8-AL-RS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K12-3/8-AL-RS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B12-1/2-AL-BS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K12-1/2-AL-BS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B12-1/2-AL-WS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K12-1/2-AL-WS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B12-1/2-AL-RS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K12-1/2-AL-RS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B12-5/8-AL-BS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K12-5/8-AL-BS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B12-5/8-AL-WS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K12-5/8-AL-WS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B12-5/8-AL-RS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K12-5/8-AL-RS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B14-5/16-AL-BS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K14-5/16-AL-BS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B14-5/16-AL-WS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K14-5/16-AL-WS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B14-5/16-AL-RS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K14-5/16-AL-RS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B14-3/8-AL-BS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K14-3/8-AL-BS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B14-3/8-AL-WS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K14-3/8-AL-WS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B14-3/8-AL-RS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K14-3/8-AL-RS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B14-1/2-AL-BS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K14-1/2-AL-BS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B14-1/2-AL-WS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K14-1/2-AL-WS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B14-1/2-AL-RS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K14-1/2-AL-RS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B14-5/8-AL-BS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K14-5/8-AL-BS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B14-5/8-AL-WS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K14-5/8-AL-WS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-B14-5/8-AL-RS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-30-K14-5/8-AL-RS	1.18	8-5/16 H8 / h7	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
2241-40-B12-3/8-AL-BS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K12-3/8-AL-BS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B12-3/8-AL-WS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K12-3/8-AL-WS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B12-3/8-AL-RS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K12-3/8-AL-RS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B12-1/2-AL-BS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K12-1/2-AL-BS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B12-1/2-AL-WS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K12-1/2-AL-WS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B12-1/2-AL-RS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K12-1/2-AL-RS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B12-5/8-AL-BS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K12-5/8-AL-BS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B12-5/8-AL-WS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K12-5/8-AL-WS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B12-5/8-AL-RS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K12-5/8-AL-RS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B12-3/4-AL-BS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K12-3/4-AL-BS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B12-3/4-AL-WS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K12-3/4-AL-WS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B12-3/4-AL-RS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K12-3/4-AL-RS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B14-3/8-AL-BS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K14-3/8-AL-BS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B14-3/8-AL-WS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K14-3/8-AL-WS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B14-3/8-AL-RS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K14-3/8-AL-RS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B14-1/2-AL-BS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K14-1/2-AL-BS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B14-1/2-AL-WS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K14-1/2-AL-WS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B14-1/2-AL-RS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K14-1/2-AL-RS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B14-5/8-AL-BS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K14-5/8-AL-BS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B14-5/8-AL-WS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K14-5/8-AL-WS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B14-5/8-AL-RS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K14-5/8-AL-RS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B14-3/4-AL-BS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K14-3/4-AL-BS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B14-3/4-AL-WS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K14-3/4-AL-WS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B14-3/4-AL-RS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K14-3/4-AL-RS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B15-3/8-AL-BS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K15-3/8-AL-BS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B15-3/8-AL-WS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K15-3/8-AL-WS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B15-3/8-AL-RS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K15-3/8-AL-RS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B15-1/2-AL-BS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K15-1/2-AL-BS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B15-1/2-AL-WS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K15-1/2-AL-WS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B15-1/2-AL-RS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K15-1/2-AL-RS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B15-5/8-AL-BS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K15-5/8-AL-BS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B15-5/8-AL-WS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K15-5/8-AL-WS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B15-5/8-AL-RS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K15-5/8-AL-RS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B15-3/4-AL-BS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K15-3/4-AL-BS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B15-3/4-AL-WS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K15-3/4-AL-WS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B15-3/4-AL-RS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K15-3/4-AL-RS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B16-3/8-AL-BS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K16-3/8-AL-BS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B16-3/8-AL-WS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K16-3/8-AL-WS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B16-3/8-AL-RS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K16-3/8-AL-RS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B16-1/2-AL-BS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K16-1/2-AL-BS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B16-1/2-AL-WS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K16-1/2-AL-WS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B16-1/2-AL-RS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K16-1/2-AL-RS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B16-5/8-AL-BS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K16-5/8-AL-BS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B16-5/8-AL-WS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K16-5/8-AL-WS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B16-5/8-AL-RS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K16-5/8-AL-RS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B16-3/4-AL-BS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K16-3/4-AL-BS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B16-3/4-AL-WS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K16-3/4-AL-WS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-B16-3/4-AL-RS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-40-K16-3/4-AL-RS	1.57	12-3/8 H8 / h7	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2241-55-B18-1/2-AL-BS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K18-1/2-AL-BS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B18-1/2-AL-WS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K18-1/2-AL-WS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B18-1/2-AL-RS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K18-1/2-AL-RS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B18-5/8-AL-BS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K18-5/8-AL-BS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B18-5/8-AL-WS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K18-5/8-AL-WS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B18-5/8-AL-RS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K18-5/8-AL-RS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B18-3/4-AL-BS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K18-3/4-AL-BS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B18-3/4-AL-WS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K18-3/4-AL-WS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B18-3/4-AL-RS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K18-3/4-AL-RS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B18-7/8-AL-BS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K18-7/8-AL-BS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B18-7/8-AL-WS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K18-7/8-AL-WS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B18-7/8-AL-RS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K18-7/8-AL-RS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B19-1/2-AL-BS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K19-1/2-AL-BS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B19-1/2-AL-WS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K19-1/2-AL-WS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B19-1/2-AL-RS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K19-1/2-AL-RS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B19-5/8-AL-BS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K19-5/8-AL-BS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B19-5/8-AL-WS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K19-5/8-AL-WS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B19-5/8-AL-RS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K19-5/8-AL-RS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B19-3/4-AL-BS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K19-3/4-AL-BS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B19-3/4-AL-WS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K19-3/4-AL-WS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B19-3/4-AL-RS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K19-3/4-AL-RS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B19-7/8-AL-BS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K19-7/8-AL-BS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B19-7/8-AL-WS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K19-7/8-AL-WS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B19-7/8-AL-RS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K19-7/8-AL-RS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B20-1/2-AL-BS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K20-1/2-AL-BS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B20-1/2-AL-WS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K20-1/2-AL-WS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B20-1/2-AL-RS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K20-1/2-AL-RS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B20-5/8-AL-BS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K20-5/8-AL-BS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B20-5/8-AL-WS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K20-5/8-AL-WS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B20-5/8-AL-RS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K20-5/8-AL-RS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B20-3/4-AL-BS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K20-3/4-AL-BS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B20-3/4-AL-WS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K20-3/4-AL-WS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B20-3/4-AL-RS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K20-3/4-AL-RS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B20-7/8-AL-BS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K20-7/8-AL-BS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B20-7/8-AL-WS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K20-7/8-AL-WS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B20-7/8-AL-RS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K20-7/8-AL-RS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B25-1/2-AL-BS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K25-1/2-AL-BS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B25-1/2-AL-WS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K25-1/2-AL-WS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B25-1/2-AL-RS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K25-1/2-AL-RS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B25-5/8-AL-BS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K25-5/8-AL-BS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B25-5/8-AL-WS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K25-5/8-AL-WS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B25-5/8-AL-RS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K25-5/8-AL-RS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B25-3/4-AL-BS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K25-3/4-AL-BS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B25-3/4-AL-WS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K25-3/4-AL-WS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B25-3/4-AL-RS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K25-3/4-AL-RS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B25-7/8-AL-BS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K25-7/8-AL-BS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B25-7/8-AL-WS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K25-7/8-AL-WS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-B25-7/8-AL-RS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8
2241-55-K25-7/8-AL-RS	2.17	18-1/2 H8 / h7	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8

Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)

d₁	d₂ - d₃ H8 Bore Recommended shaft tolerance h7

0.55	3-3/16	3-1/4	4-3/16	4-1/4	5-3/16	5-1/4	6-3/16	6-1/4	-	-	-	-	-	-	-	-
0.79	5-3/16	5-1/4	5-5/16	5-3/8	6-3/16	6-1/4	6-5/16	6-3/8	8-3/16	8-1/4	8-5/16	8-3/8	-	-	-	-
1.18	8-5/16	8-3/8	8-1/2	8-5/8	10-5/16	10-3/8	10-1/2	10-5/8	12-5/16	12-3/8	12-1/2	12-5/8	14-5/16	14-3/8	14-1/2	14-5/8
1.57	12-3/8	12-1/2	12-5/8	12-3/4	14-3/8	14-1/2	14-5/8	14-3/4	15-3/8	15-1/2	15-5/8	15-3/4	16-3/8	16-1/2	16-5/8	16-3/4
2.17	18-1/2	18-5/8	18-3/4	18-7/8	19-1/2	19-5/8	19-3/4	19-7/8	20-1/2	20-5/8	20-3/4	20-7/8	25-1/2	25-5/8	25-3/4	25-7/8

Show / Hide columns

Dimensions in: Inch (change to Metric)

d₁	d₄	l₁	l₂ Recommended shaft insertion depth	l₃	s Recommended installation spacing	Tightening torque of the screw in Nm ≈

0.55	M 3	0.87	0.28	0.14	0.04	0.7
0.79	M 3	1.18	0.39	0.20	0.04	0.7
1.18	M 4	1.38	0.43	0.22	0.06	1.7
1.57	M 5	2.60	0.98	0.33	0.08	4
2.17	M 6	3.07	1.18	0.41	0.08	7

Build & Price

Technical Values

Show / Hide columns

d₁	Coupling spider	Shore hardness coupling spider	Rated torque in Nm	Max. torque in Nm	Max. speed (min^-1)

14	BS	80A	0.7	1.4	45000
14	WS	92A	1.2	2.4	45000
14	RS	98A	2	4	45000
20	BS	80A	1.8	3.6	31000
20	WS	92A	3	6	31000
20	RS	98A	5	10	31000
30	BS	80A	4	8	21000
30	WS	92A	7.5	15	21000
30	RS	98A	12.5	25	21000
40	BS	80A	4.9	9.8	15000
40	WS	92A	10	20	15000
40	RS	98A	17	34	15000
55	BS	80A	17	34	11000
55	WS	92A	35	70	11000
55	RS	98A	60	120	11000

Show / Hide columns

d₁	Coupling spider	Moment of inertia in kgm²	Static torsional stiffness in Nm/rad	Max. shaft misalignment Lateral in mm	Axial in mm	Angular in °

14	BS	2.0 x 10^{^-7}	8	0.2	0.6	1
14	WS	2.0 x 10^{^-7}	14	0.1	0.6	1
14	RS	2.0 x 10^{^-7}	22	0.1	0.6	1
20	BS	1.1 x 10^{^-6}	16	0.2	0.8	1
20	WS	1.1 x 10^{^-6}	29	0.2	0.8	1
20	RS	1.1 x 10^{^-6}	55	0.1	0.8	1
30	BS	6.2 x 10^{^-6}	46	0.2	1	1
30	WS	6.2 x 10^{^-6}	73	0.2	1	1
30	RS	6.2 x 10^{^-6}	130	0.1	1	1
40	BS	3.7 x 10^{^-5}	380	0.2	1.2	1
40	WS	3.7 x 10^{^-5}	570	0.1	1.2	1
40	RS	3.7 x 10^{^-5}	1200	0.1	1.2	1
55	BS	1.6 x 10^{^-4}	1400	0.2	1.4	1
55	WS	1.6 x 10^{^-4}	1600	0.2	1.4	1
55	RS	1.6 x 10^{^-4}	2600	0.1	1.4	1

Temperature Correction Factors


If the ambient temperature is greater than 86 °F (30 °C), the rated torque and the maximum torque must be adjusted using the temperature correction factors.
Ambient temperature						Temperature correction factor
-4 °F up to + 86 °F (-20 °C up to +30 °C)						1
+86 °F up to +104 °F (+30 °C up to +40 °C)						0.8
+104 °F up to +140 °F (+40 °C up to +60 °C)						0.7

Misalignment and Runout Tolerances


Like all mechanical parts, shafts are subjected to manufacturing and assembly tolerances that generally cannot be entirely eliminated even with extensive technical measures. If these deviations are not taken into account in the design, the result can be vibrations, running noises, and wear or damage to the shafts and their bearings. Suitable couplings not only are able to effectively compensate for misalignment and runout errors, they also greatly simplify the assembly process, thereby reducing the overall labor required. Shaft misalignment and runout errors can vary in nature and should always be taken into consideration when selecting the appropriate coupling.
Error type						Misalignment diagram
Lateral The axes of the shafts are in fact parallel, but they are offset laterally and do not line up.						$Misalignment diagram{St:_}Lateral$
Angular The axes of the shafts do not lie in the same plane; they meet at a certain angle.						$Misalignment diagram{St:_}Angular$
Axial The shafts move axially along the axis of rotation.						$Misalignment diagram{St:_}Axial$
Runout The shafts move radially out of the center of the axis of rotation.						$Misalignment diagram{St:_}Runout$

Shaft Insertion Depth

For correct fastening of the coupling hubs, the shaft must be installed according to the recommended shaft insertion depth l₂. The shaft insertion depth l₂ is specified in the standard sheet of the respective coupling.
If the insertion depth is too low, the shaft could slip out of the coupling, or the clamping hub could break. If the shaft is inserted too far, this can cause interference within the coupling, leading to damage.

Application Example

Static Torsional Stiffness and Temperature


The diagrams show the change in static torsional stiffness within the permissible operating temperature range, under the assumption that the static torsional stiffness at 68°F (20 °C) is 100 percent. The torsional stiffness of the couplings decreases with increasing temperature.

Restoring Force – Eccentricity


When the shaft ends are installed in eccentric arrangements, the coupling constantly attempts to return to its neutral position. The resulting force is referred to as restoring force. If the couplings are installed with the lowest possible eccentricity, the resulting restoring forces are lower. This also reduces the force acting on the shaft bearing.

Selected Part

Part Number

Total (net)

US$62.86

In Stock: 5

In Stock

Quantity

Create Project List

Save as Favorites

Please note our quantity discounts (US Dollars).

Min	Max	Price
1	4	US$62.86
5	9	US$57.62
10	24	US$52.38
≥ 25		US$47.14

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.019 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 800-877-8351

CAD Download

Other Data Formats

About CAD Downloads

Need Help?

Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM Central Time: 800-877-8351

Special Requests | Contact our sales team

JW Winco Services

Request Callback

JW Winco Handbook

Your Contact

JW Winco News

GN 2241 Elastomer Jaw Couplings Aluminum, Hub with Set Screw, with Metric-Inch Bores

Product description

Specification

Accessory

Part Options / Table

Bore code

Metric

Build & Price

Technical Values

Temperature Correction Factors

Misalignment and Runout Tolerances

Shaft Insertion Depth

Application Example

Static Torsional Stiffness and Temperature

Restoring Force – Eccentricity

Selected Part

CAD Download

CAD data

Login

Email CAD File

Need Help?

This could also be interesting...

GN 2240

GN 2243

GN 2243

GN 2240

GN 2241

GN 2240.1

GN 2250

Your Contact

JW Winco Services