Flanged Connector Clamps GN 146.5

Type: A - Without seals

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

corrosion-resistant
precise fit
environmentally friendly

Show all Stainless Steel products

Standard Sheet GN 146.5 Print This Page Plastic Characteristics Stainless Steel Characteristics

Product description

The clamping bores of the flanged connector clamps GN 146.5 are mechanically machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462.

At the screw location z, the carriage bolt and the cap nut reduce the bore cross-section for clamping. Type B is equipped with seals at the screw location.

For clamping without tools, the cap nut can be replaced by an adjustable lever GN 911 listed in the table as accessory.

Specification

Body
Stainless steel AISI CF-8
Matte shot-blasted finish

Carriage bolts DIN 603
Stainless steel

Cap nuts DIN 917 / washers
Stainless steel

Seals
- Sealing disks
  Plastic (Polyacetal POM)
- Spacer ring
  Silicone, 40 ... 60 Shore A

RoHS

Accessory

Adjustable Levers GN 911.3

Selected Part

Part Number	d₁ Bore	b	d₂	d₃	k Clamping length	l₁	m	t	x₁	x₂	y₁	y₂	z Screw location for screw size	Accessory Recom. lever GN 911.3 for z l₂

146.5-B30-A-4	B 30	0.87	0.26	1.46	1.57	2.60	1.18	0.28	2.05	1.38	2.76	2.09	M 8	2.48	3.07
146.5-B40-A-4	B 40	1.10	0.33	1.98	2.20	3.39	1.65	0.30	3.07	2.05	4.25	3.23	M 10	3.07	3.62
146.5-B50-A-4	B 50	1.18	0.42	2.36	2.56	3.88	1.97	0.35	3.62	2.44	5.04	3.86	M 10	3.07	3.62

Part Number	d₁ Bore	b	d₂	d₃	k Clamping length	l₁	m	t	x₁	x₂	y₁	y₂	z Screw location for screw size	Accessory Recom. lever GN 911.3 for z l₂

146.5-B30-B-4	B 30	0.87	0.26	1.46	1.57	2.60	1.18	0.28	2.05	1.38	2.76	2.09	M 8	2.48	3.07
146.5-B40-B-4	B 40	1.10	0.33	1.98	2.20	3.39	1.65	0.30	3.07	2.05	4.25	3.23	M 10	3.07	3.62
146.5-B50-B-4	B 50	1.18	0.42	2.36	2.56	3.88	1.97	0.35	3.62	2.44	5.04	3.86	M 10	3.07	3.62

d₁ Bore	b	d₂	d₃	k Clamping length	l₁	m	t	x₁	x₂	y₁	y₂	z Screw location for screw size	Accessory Recom. lever GN 911.3 for z l₂

B 30	0.87	0.26	1.46	1.57	2.60	1.18	0.28	2.05	1.38	2.76	2.09	M 8	2.48	3.07
B 40	1.10	0.33	1.98	2.20	3.39	1.65	0.30	3.07	2.05	4.25	3.23	M 10	3.07	3.62
B 50	1.18	0.42	2.36	2.56	3.88	1.97	0.35	3.62	2.44	5.04	3.86	M 10	3.07	3.62

Part Number

Total (net)

US$95.00

In Stock: 4

In Stock

Quantity

Create Project List

Save as Favorites

Please note our quantity discounts (US Dollars).

Min	Max	Price
1	9	US$95.00
10	24	US$87.08
25	49	US$79.17
≥ 50		US$71.25

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.595 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 800-877-8351