Sensor Holders GN 277.4

Product description

Information

The clamping bore of sensor holders GN 277.4 is mechanically machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462.

At the screw location z, the socket cap screw reduces the bore cross-section for clamping.

For clamping without tools, the socket cap screw can be replaced by an adjustable lever GN 911 listed in the table as accessory.

Specification

Body
Aluminum
Powder coated
Black, RAL 9005, textured finishSW

Socket cap screws DIN 912
Stainless steel AISI 304

Hex nuts DIN 985
Stainless steel AISI 304
Self-locking via polyamide ring

RoHS

Accessory

Adjustable Levers GN 911

On request

Stainless steel version

Build & Price

Part Number	d₁ Bore for clamping Ø	d₂ Bore for sensor	b Swivel width	d₃	k	l₁	l₂	m	t	z Screw location for screw size	Accessory Recom. lever GN 911 for z l₃

277.4-B12-B12-2-SW	B 12	B 12	0.98	1.06	0.98	2.52	0.98	1.16	0.43	M6-20	1.77	2.48
277.4-B12-B18-2-SW	B 12	B 18	0.98	1.06	0.98	2.52	0.98	1.16	0.43	M6-20	1.77	2.48
277.4-B14-B12-2-SW	B 14	B 12	0.98	1.06	0.98	2.52	0.98	1.16	0.43	M6-20	1.77	2.48
277.4-B14-B18-2-SW	B 14	B 18	0.98	1.06	0.98	2.52	0.98	1.16	0.43	M6-20	1.77	2.48
277.4-B15-B12-2-SW	B 15	B 12	0.98	1.06	0.98	2.52	0.98	1.16	0.43	M6-20	1.77	2.48
277.4-B15-B18-2-SW	B 15	B 18	0.98	1.06	0.98	2.52	0.98	1.16	0.43	M6-20	1.77	2.48
277.4-B16-B12-2-SW	B 16	B 12	0.98	1.06	0.98	2.52	0.98	1.16	0.43	M6-20	1.77	2.48
277.4-B16-B18-2-SW	B 16	B 18	0.98	1.06	0.98	2.52	0.98	1.16	0.43	M6-20	1.77	2.48
277.4-B18-B12-2-SW	B 18	B 12	0.98	1.06	0.98	2.52	0.98	1.16	0.43	M6-20	1.77	2.48
277.4-B18-B18-2-SW	B 18	B 18	0.98	1.06	0.98	2.52	0.98	1.16	0.43	M6-20	1.77	2.48

d₁ Bore for clamping Ø	d₂ Bore for sensor	b Swivel width	d₃	k	l₁	l₂	m	t	z Screw location for screw size	Accessory Recom. lever GN 911 for z l₃

B 12	B 12	B 18	0.98	1.06	0.98	2.52	0.98	1.16	0.43	M6-20	1.77	2.48
B 14	B 12	B 18	0.98	1.06	0.98	2.52	0.98	1.16	0.43	M6-20	1.77	2.48
B 15	B 12	B 18	0.98	1.06	0.98	2.52	0.98	1.16	0.43	M6-20	1.77	2.48
B 16	B 12	B 18	0.98	1.06	0.98	2.52	0.98	1.16	0.43	M6-20	1.77	2.48
B 18	B 12	B 18	0.98	1.06	0.98	2.52	0.98	1.16	0.43	M6-20	1.77	2.48

3D Product Configurator

Bore d₂

B 12

B 18

Identification no.

2 - With stainless steel socket cap screw DIN 912

Finish

SW - Black, RAL 9005, textured finish

Selected Part

Part Number

Total US Dollars (net)

$31.28

Call / Email for Delivery Time

Quantity

Please note our quantity discounts (US Dollars).

Min	Max	Price
1	9	$31.28
10	24	$28.68
25	49	$26.07
≥ 50		$23.46

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.130 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 800-877-8351

All Prices are in US Dollars. Taxes Not Included.