GN 2426 cam rollers are combined with GN 2422 cam roller linear guide rails to build individual and space-saving cam roller linear guide rail systems.
The outer surfaces of the cam rollers are slightly convex, so that in conjunction with the correspondingly-shaped fixed bearing rails (type XT or XV) there is an accurate and linear run across four contact points. The same applies to floating bearing rails (type UT or UV), but with only two contact points.
Combined with the rail, clearance freedom or the initial tension of several cam rollers can be determined during assembly by using the eccentrically adjustable cam roller (type E). The required open-end wrench is available separately under GN 2424.1.
The sealed and permanently lubricated cam rollers guarantee a superior running performance.
Rolling bearing steel, hardened
Dust and splash water protected (2RS)
Sealing disks Plastic (NBR)2RS
Steel, zinc plated, blue passivated finish
Hide technical drawing
Part Options / Table
Cam roller with bore
Normal cam roller with centered bearing pivot
Eccentrical cam roller with eccentrical bearing pivot
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Weight: 0.008 lbs
If weight is not listed, please contact our Sales Department for additional information regarding weight. Phone: 800-877-8351