Type: S - With safety catch Material: ST - Steel Identification No.: 1 - Long type
Product Family Stainless Steel
Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.
Toggle latches GN 821 are used for the secure holding of flaps, container lids, etc. They lock securely over the center and are thus vibration proof.
A versatile, low profile design.
The stroke w1 of the clamping hook can pull the parts to be clamped together by up to 6 mm. The range w2 can be adjusted on the M6 threaded spindle of the clamping hook.
The types S, SV and SS prevent unwanted release of the toggle latch.
In the standard version the toggle latches of type SS have the same lock and / or the same key.
The load specified in the table is simply a guideline value for the nominal static pulling force the latch can withstand. The holding capacity can be adversely affected by the conditions under which the latch is used, such as vibration or shock loads.
The catch bracket is included.
Specification
Toggle latch SteelST, zinc plated, blue passivated finish
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Weight: 0.485 lbs
If weight is not listed, please contact our Sales Department for additional information regarding weight. Phone: 800-877-8351