Indexing plunger latch mechanisms GN 417 with flange are mounted parallel to the plunger pin and are therefore characterized by an especially low height. The mounting hole pattern with slotted holes offers additional mounting options, such as for the use of aluminum profiles. The use of washers makes it easier to mount the parts using the slotted holes.
Indexing plunger latch mechanisms with lock-out (type C) are used for such applications where the plunger pin needs to stay in its retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notch keeps the plunger in the retracted position.
This stainless steel version allows the indexing plunger latch mechanisms to be used in aggressive environments.
The fastening range is designed so that washers ISO 7092 can be used.
In addition to using metric fasteners for mounting:
where b4 = 3.3 mm, #4-40 socket cap screws can be used
where b4 = 4.3 mm, #6-32 socket cap screws can be used
where b4 = 5.4 mm, #10-24 socket cap screws can be used
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Weight: 0.028 lbs
If weight is not listed, please contact our Sales Department for additional information regarding weight. Phone: 800-877-8351