Cart

The cart is empty.

English
Language English Español Français
Show all

Product Family: Accessories for profile systems (97 Hits)

Filter Products
System of Measurement
Material
Product Family

Remove filters

1.2 Operating by Using Machine and Device Handles

GN 565.1 Aluminum Cabinet U-Handles, with Counterbored Mounting Holes Finish: SW - Black, RAL 9005, textured finish GN 565.1 Aluminum Cabinet U-Handles, with Counterbored Mounting Holes Finish: BL - Plain, tumbled finish GN 565.1 Aluminum Cabinet U-Handles, with Counterbored Mounting Holes Finish: EL - Anodized finish, natural color GN 565.1 Aluminum Cabinet U-Handles, with Counterbored Mounting Holes Finish: RS - Red, RAL 3000, textured finish GN 565.1 Aluminum Cabinet U-Handles, with Counterbored Mounting Holes Finish: SR - Silver, RAL 9006, textured finish
GN 565.1 Aluminum Cabinet U-Handles, with Counterbored Mounting Holes
GN 565.2 Angled Aluminum Cabinet U-Handles, with Tapped or Through Holes, with Mounting Hardware Type: A - Mounting from the back (tapped blind hole)<br />Finish: SW - Black, RAL 9005, textured finish GN 565.2 Angled Aluminum Cabinet U-Handles, with Tapped or Through Holes, with Mounting Hardware Type: B - Mounting from the operator's side (only for b<sub>1</sub> = 26 mm)<br />Finish: EL - Anodized finish, natural color GN 565.2 Angled Aluminum Cabinet U-Handles, with Tapped or Through Holes, with Mounting Hardware Type: B - Mounting from the operator's side (only for b<sub>1</sub> = 26 mm)<br />Finish: SR - Silver, RAL 9006, textured finish
GN 565.2 Angled Aluminum Cabinet U-Handles, with Tapped or Through Holes, with Mounting Hardware
EN 630.1 Technopolymer Plastic Off-Set Open U-Handles, with Counterbored Through Holes, Ergostyle® Color of the cover caps: DRT - Red, RAL 3000, shiny finish EN 630.1 Technopolymer Plastic Off-Set Open U-Handles, with Counterbored Through Holes, Ergostyle® Color of the cover caps: DGB - Yellow, RAL 1021, shiny finish EN 630.1 Technopolymer Plastic Off-Set Open U-Handles, with Counterbored Through Holes, Ergostyle® Color of the cover caps: DOR - Orange, RAL 2004, shiny finish EN 630.1 Technopolymer Plastic Off-Set Open U-Handles, with Counterbored Through Holes, Ergostyle® Color of the cover caps: DSG - Black-gray, RAL 7021, shiny finish
EN 630.1 Technopolymer Plastic Off-Set Open U-Handles, with Counterbored Through Holes, Ergostyle®
EN 528 Technopolymer Plastic, Cabinet U-Handles, with Counterbored Mounting Holes Material: PA - Plastic<br />Color: SW - Black, RAL 9005, matte finish EN 528 Technopolymer Plastic, Cabinet U-Handles, with Counterbored Mounting Holes Material: ESD - Plastic<br />Color: SW - Black, RAL 9005, matte finish EN 528 Technopolymer Plastic, Cabinet U-Handles, with Counterbored Mounting Holes Material: PA - Plastic<br />Color: GR - Gray, RAL 7031, matte finish EN 528 Technopolymer Plastic, Cabinet U-Handles, with Counterbored Mounting Holes Material: PA - Plastic<br />Color: OR - Orange, RAL 2004, matte finish EN 528 Technopolymer Plastic, Cabinet U-Handles, with Counterbored Mounting Holes Material: PA - Plastic<br />Color: RT - Red, RAL 3000, matte finish EN 528 Technopolymer Plastic, Cabinet U-Handles, with Counterbored Mounting Holes Material: PP - Plastic<br />Color: SW - Black, RAL 9005, matte finish EN 528 Technopolymer Plastic, Cabinet U-Handles, with Counterbored Mounting Holes Material: SV - Plastic, self-extinguishing<br />Color: SW - Black, RAL 9005, matte finish
EN 528 Technopolymer Plastic, Cabinet U-Handles, with Counterbored Mounting Holes
GN 728 Economical Aluminum Cabinet U-Handles, with Tapped or Counterbored Through Holes Type: A - Mounting from the back (tapped blind hole)<br />Finish: SW - Black, RAL 9005, textured finish GN 728 Economical Aluminum Cabinet U-Handles, with Tapped or Counterbored Through Holes Type: A - Mounting from the back (tapped blind hole)<br />Finish: BL - Plain, tumbled finish GN 728 Economical Aluminum Cabinet U-Handles, with Tapped or Counterbored Through Holes Type: A - Mounting from the back (tapped blind hole)<br />Finish: SR - Silver, RAL 9006, textured finish GN 728 Economical Aluminum Cabinet U-Handles, with Tapped or Counterbored Through Holes Type: B - Mounting from the operator's side<br />Finish: BL - Plain, tumbled finish GN 728 Economical Aluminum Cabinet U-Handles, with Tapped or Counterbored Through Holes Type: B - Mounting from the operator's side<br />Finish: SR - Silver, RAL 9006, textured finish GN 728 Economical Aluminum Cabinet U-Handles, with Tapped or Counterbored Through Holes Type: B - Mounting from the operator's side<br />Finish: SW - Black, RAL 9005, textured finish
GN 728 Economical Aluminum Cabinet U-Handles, with Tapped or Counterbored Through Holes
GN 728.5 Economical Stainless Steel Cabinet U-Handles, with Tapped or Counterbored Through Holes Type: B - Mounting from the operator's side GN 728.5 Economical Stainless Steel Cabinet U-Handles, with Tapped or Counterbored Through Holes Type: A - Mounting from the back (tapped blind hole)
GN 728.5 Economical Stainless Steel Cabinet U-Handles, with Tapped or Counterbored Through Holes
EN 628 Technopolymer Plastic Bridge Handles, with Counterbored Mounting Holes or Tapped Inserts, Ergostyle® Color of the cover cap: DGB - Yellow, RAL 1021, matte finish EN 628 Technopolymer Plastic Bridge Handles, with Counterbored Mounting Holes or Tapped Inserts, Ergostyle® Color of the cover cap: DBL - Blue, RAL 5024, matte finish EN 628 Technopolymer Plastic Bridge Handles, with Counterbored Mounting Holes or Tapped Inserts, Ergostyle® Color of the cover cap: DGN - Green, RAL 6017, matte finish EN 628 Technopolymer Plastic Bridge Handles, with Counterbored Mounting Holes or Tapped Inserts, Ergostyle® Color of the cover cap: DGR - Gray, RAL 7035, matte finish EN 628 Technopolymer Plastic Bridge Handles, with Counterbored Mounting Holes or Tapped Inserts, Ergostyle® Color of the cover cap: DOR - Orange, RAL 2004, matte finish EN 628 Technopolymer Plastic Bridge Handles, with Counterbored Mounting Holes or Tapped Inserts, Ergostyle® Color of the cover cap: DRT - Red, RAL 3000, matte finish EN 628 Technopolymer Plastic Bridge Handles, with Counterbored Mounting Holes or Tapped Inserts, Ergostyle® Color of the cover cap: DSG - Black-gray, RAL 7021, matte finish
EN 628 Technopolymer Plastic Bridge Handles, with Counterbored Mounting Holes or Tapped Inserts, Ergostyle®
EN 629 Plastic Cabinet U-Handles, with Cover Cap Color of the cover cap: DRT - Red, RAL 3000, matte finish EN 629 Plastic Cabinet U-Handles, with Cover Cap Color of the cover cap: DBL - Blue, RAL 5024, matte finish EN 629 Plastic Cabinet U-Handles, with Cover Cap Color of the cover cap: DGB - Yellow, RAL 1021, matte finish EN 629 Plastic Cabinet U-Handles, with Cover Cap Color of the cover cap: DGN - Green, RAL 6017, matte finish EN 629 Plastic Cabinet U-Handles, with Cover Cap Color of the cover cap: DGR - Gray, RAL 7035, matte finish EN 629 Plastic Cabinet U-Handles, with Cover Cap Color of the cover cap: DOR - Orange, RAL 2004, matte finish EN 629 Plastic Cabinet U-Handles, with Cover Cap Color of the cover cap: DSG - Black-gray, RAL 7021, matte finish
NEW EN 629 Plastic Cabinet U-Handles, with Cover Cap
EN 629.1 Plastic Cabinet U-Handles
NEW EN 629.1 Plastic Cabinet U-Handles
GN 181 Zinc Die-Cast Mounting Plate Sets, for Cabinet U-Handles Finish: SW - Black, RAL 9005, textured finish GN 181 Zinc Die-Cast Mounting Plate Sets, for Cabinet U-Handles Finish: SR - Silver, RAL 9006, textured finish
GN 181 Zinc Die-Cast Mounting Plate Sets, for Cabinet U-Handles
GN 333.1 Aluminum Tubular Handles, with Straight Legs Type: A - Mounting from the back (tapped blind hole)<br />Finish: EL - Anodized finish, natural color GN 333.1 Aluminum Tubular Handles, with Straight Legs Type: A - Mounting from the back (tapped blind hole)<br />Finish: ES - Anodized finish, natural color GN 333.1 Aluminum Tubular Handles, with Straight Legs Type: A - Mounting from the back (tapped blind hole)<br />Finish: SW - Black, RAL 9005, textured finish GN 333.1 Aluminum Tubular Handles, with Straight Legs Type: B - Mounting from the operator's side (only for d<sub>1</sub> = 28 mm)<br />Finish: EL - Anodized finish, natural color GN 333.1 Aluminum Tubular Handles, with Straight Legs Type: B - Mounting from the operator's side (only for d<sub>1</sub> = 28 mm)<br />Finish: ES - Anodized finish, natural color GN 333.1 Aluminum Tubular Handles, with Straight Legs Type: B - Mounting from the operator's side (only for d<sub>1</sub> = 28 mm)<br />Finish: SW - Black, RAL 9005, textured finish
GN 333.1 Aluminum Tubular Handles, with Straight Legs
GN 333 Aluminum Tubular Handles, with Angled Legs Type: A - Mounting from the back (tapped blind hole)<br />Finish: SW - Black, RAL 9005, textured finish GN 333 Aluminum Tubular Handles, with Angled Legs Type: A - Mounting from the back (tapped blind hole)<br />Finish: EL - Anodized finish, natural color GN 333 Aluminum Tubular Handles, with Angled Legs Type: A - Mounting from the back (tapped blind hole)<br />Finish: ES - Anodized finish, natural color GN 333 Aluminum Tubular Handles, with Angled Legs Type: B - Mounting from the operator's side (only for d<sub>1</sub> = 28 mm)<br />Finish: EL - Anodized finish, natural color GN 333 Aluminum Tubular Handles, with Angled Legs Type: B - Mounting from the operator's side (only for d<sub>1</sub> = 28 mm)<br />Finish: ES - Anodized finish, natural color GN 333 Aluminum Tubular Handles, with Angled Legs Type: B - Mounting from the operator's side (only for d<sub>1</sub> = 28 mm)<br />Finish: SW - Black, RAL 9005, textured finish
GN 333 Aluminum Tubular Handles, with Angled Legs
GN 667 Aluminum or Stainless Steel Tubular Grip Handles, with Socket Cap Screws Finish: SW - Black, RAL 9005, textured finish GN 667 Aluminum or Stainless Steel Tubular Grip Handles, with Socket Cap Screws Finish: EL - Anodized finish, natural color GN 667 Aluminum or Stainless Steel Tubular Grip Handles, with Socket Cap Screws Finish: NG - Ground, matte shiny finish
GN 667 Aluminum or Stainless Steel Tubular Grip Handles, with Socket Cap Screws
GN 334.1 Aluminum Oval Tubular Handles, Mounting from the Operator‘s Side Finish: EL - Anodized finish, natural color GN 334.1 Aluminum Oval Tubular Handles, Mounting from the Operator‘s Side Finish: ES - Anodized finish, natural color GN 334.1 Aluminum Oval Tubular Handles, Mounting from the Operator‘s Side Finish: SW - Black, RAL 9005, textured finish
GN 334.1 Aluminum Oval Tubular Handles, Mounting from the Operator‘s Side
GN 335 Aluminum Oval Tubular Handles, with Inclined Handle Profile Type: A - Mounting from the back (tapped blind hole)<br />Finish: ES - Anodized finish, natural color GN 335 Aluminum Oval Tubular Handles, with Inclined Handle Profile Type: A - Mounting from the back (tapped blind hole)<br />Finish: EL - Anodized finish, natural color GN 335 Aluminum Oval Tubular Handles, with Inclined Handle Profile Type: A - Mounting from the back (tapped blind hole)<br />Finish: SW - Black, RAL 9005, textured finish GN 335 Aluminum Oval Tubular Handles, with Inclined Handle Profile Type: B - Mounting from the operator's side<br />Finish: EL - Anodized finish, natural color GN 335 Aluminum Oval Tubular Handles, with Inclined Handle Profile Type: B - Mounting from the operator's side<br />Finish: ES - Anodized finish, natural color GN 335 Aluminum Oval Tubular Handles, with Inclined Handle Profile Type: B - Mounting from the operator's side<br />Finish: SW - Black, RAL 9005, textured finish
GN 335 Aluminum Oval Tubular Handles, with Inclined Handle Profile
EN 630 Technopolymer Plastic Off-Set Enclosed Safety U-Handles, with Counterbored Through Holes, Ergostyle® Color of the cover: DOR - Orange, RAL 2004, shiny finish EN 630 Technopolymer Plastic Off-Set Enclosed Safety U-Handles, with Counterbored Through Holes, Ergostyle® Color of the cover: DBL - Blue, RAL 5024, shiny finish EN 630 Technopolymer Plastic Off-Set Enclosed Safety U-Handles, with Counterbored Through Holes, Ergostyle® Color of the cover: DGB - Yellow, RAL 1021, shiny finish EN 630 Technopolymer Plastic Off-Set Enclosed Safety U-Handles, with Counterbored Through Holes, Ergostyle® Color of the cover: DGN - Green, RAL 6017, shiny finish EN 630 Technopolymer Plastic Off-Set Enclosed Safety U-Handles, with Counterbored Through Holes, Ergostyle® Color of the cover: DGR - Gray, RAL 7035, shiny finish EN 630 Technopolymer Plastic Off-Set Enclosed Safety U-Handles, with Counterbored Through Holes, Ergostyle® Color of the cover: DRT - Red, RAL 3000, shiny finish EN 630 Technopolymer Plastic Off-Set Enclosed Safety U-Handles, with Counterbored Through Holes, Ergostyle® Color of the cover: DSG - Black-gray, RAL 7021, shiny finish
EN 630 Technopolymer Plastic Off-Set Enclosed Safety U-Handles, with Counterbored Through Holes, Ergostyle®
EN 630.2 Technopolymer Plastic Guard Safety Handles, with Counterbored Through Holes, Ergostyle® Color of the cover: DBL - Blue, RAL 5024, shiny finish EN 630.2 Technopolymer Plastic Guard Safety Handles, with Counterbored Through Holes, Ergostyle® Color of the cover: DGB - Yellow, RAL 1021, shiny finish EN 630.2 Technopolymer Plastic Guard Safety Handles, with Counterbored Through Holes, Ergostyle® Color of the cover: DGR - Gray, RAL 7035, shiny finish EN 630.2 Technopolymer Plastic Guard Safety Handles, with Counterbored Through Holes, Ergostyle® Color of the cover: DOR - Orange, RAL 2004, shiny finish EN 630.2 Technopolymer Plastic Guard Safety Handles, with Counterbored Through Holes, Ergostyle® Color of the cover: DRT - Red, RAL 3000, shiny finish EN 630.2 Technopolymer Plastic Guard Safety Handles, with Counterbored Through Holes, Ergostyle® Color of the cover: DSG - Black-gray, RAL 7021, shiny finish
EN 630.2 Technopolymer Plastic Guard Safety Handles, with Counterbored Through Holes, Ergostyle®

3.1 Indexing, Locking, Blocking with Pins and Ball-Shaped Elements

GN 412 Zinc Die-Cast Indexing Plungers, Lock-Out and Non Lock-Out, with Mounting Flange Type: B - Non lock-out<br />Identification no.: 1 - Mounting from the front GN 412 Zinc Die-Cast Indexing Plungers, Lock-Out and Non Lock-Out, with Mounting Flange Type: B - Non lock-out<br />Identification no.: 2 - Mounting from the back GN 412 Zinc Die-Cast Indexing Plungers, Lock-Out and Non Lock-Out, with Mounting Flange Type: C - Lock-out<br />Identification no.: 1 - Mounting from the front GN 412 Zinc Die-Cast Indexing Plungers, Lock-Out and Non Lock-Out, with Mounting Flange Type: C - Lock-out<br />Identification no.: 2 - Mounting from the back
GN 412 Zinc Die-Cast Indexing Plungers, Lock-Out and Non Lock-Out, with Mounting Flange
GN 416 Zinc Die-Cast Indexing Plunger Latch Mechanisms, Lock-Out and Non Lock-Out Type: L1 - Latching / lock-out via counter-clockwise rotation GN 416 Zinc Die-Cast Indexing Plunger Latch Mechanisms, Lock-Out and Non Lock-Out Type: R1 - Latching / lock-out via clockwise rotation GN 416 Zinc Die-Cast Indexing Plunger Latch Mechanisms, Lock-Out and Non Lock-Out Type: S - Without latching, non lock-out
GN 416 Zinc Die-Cast Indexing Plunger Latch Mechanisms, Lock-Out and Non Lock-Out
GN 416.1 Zinc Die-Cast Locators, for GN 416 Indexing Plunger Latch Mechanisms
GN 416.1 Zinc Die-Cast Locators, for GN 416 Indexing Plunger Latch Mechanisms
GN 417 Zinc Die-Cast Indexing Plunger Latch Mechanisms, Non Lock-Out, with Pull Ring / with Wire Loop Type: A - With pull ring GN 417 Zinc Die-Cast Indexing Plunger Latch Mechanisms, Non Lock-Out, with Pull Ring / with Wire Loop Type: D - With wire loop
GN 417 Zinc Die-Cast Indexing Plunger Latch Mechanisms, Non Lock-Out, with Pull Ring / with Wire Loop
GN 417 Stainless Steel Indexing Plunger Latch Mechanisms, Non Lock-Out, with Pull Ring / with Wire Loop Type: A - With pull ring<br />Material: NI - Stainless steel precision casting GN 417 Stainless Steel Indexing Plunger Latch Mechanisms, Non Lock-Out, with Pull Ring / with Wire Loop Type: D - With wire loop<br />Material: NI - Stainless steel precision casting
GN 417 Stainless Steel Indexing Plunger Latch Mechanisms, Non Lock-Out, with Pull Ring / with Wire Loop
GN 417 Zinc Die-Cast Indexing Plunger Latch Mechanisms, Lock-Out and Non Lock-Out, with Knob Type: C - Lock-out GN 417 Zinc Die-Cast Indexing Plunger Latch Mechanisms, Lock-Out and Non Lock-Out, with Knob Type: B - Non lock-out
GN 417 Zinc Die-Cast Indexing Plunger Latch Mechanisms, Lock-Out and Non Lock-Out, with Knob
GN 417 Stainless Steel Indexing Plunger Latch Mechanisms, Lock-Out and Non Lock-Out, with Knob Type: C - Lock-out<br />Material: NI - Stainless steel precision casting GN 417 Stainless Steel Indexing Plunger Latch Mechanisms, Lock-Out and Non Lock-Out, with Knob Type: B - Non lock-out<br />Material: NI - Stainless steel precision casting
GN 417 Stainless Steel Indexing Plunger Latch Mechanisms, Lock-Out and Non Lock-Out, with Knob
GN 417.1 Steel Locators, for GN 417 Indexing Plunger Latch Mechanisms
GN 417.1 Steel Locators, for GN 417 Indexing Plunger Latch Mechanisms
GN 417.1 Stainless Steel Locators, for GN 417 Indexing Plunger Latch Mechanisms
GN 417.1 Stainless Steel Locators, for GN 417 Indexing Plunger Latch Mechanisms
GN 722.6 Steel Indexing Plungers, with Mounting Flange, Parallel to the Plunger Pin Type: A - With pull ring<br />Finish: SW - Black, RAL 9005, textured finish GN 722.6 Steel Indexing Plungers, with Mounting Flange, Parallel to the Plunger Pin Type: A - With pull ring<br />Finish: ZB - Zinc plated, blue passivated finish
GN 722.6 Steel Indexing Plungers, with Mounting Flange, Parallel to the Plunger Pin
GN 722.6 Stainless Steel Indexing Plungers, with Mounting Flange, Parallel to the Plunger Pin
GN 722.6 Stainless Steel Indexing Plungers, with Mounting Flange, Parallel to the Plunger Pin
GN 412.1 Zinc Die-Cast Mounting Blocks, for Indexing Plungers / Cam Action Indexing Plungers Identification no.: 2 - Mounting from the back GN 412.1 Zinc Die-Cast Mounting Blocks, for Indexing Plungers / Cam Action Indexing Plungers Identification no.: 1 - Mounting from the front
GN 412.1 Zinc Die-Cast Mounting Blocks, for Indexing Plungers / Cam Action Indexing Plungers
GN 612.2 Steel Cam Action Indexing Plungers, Lock-Out, with Mounting Flange Type: B - With plastic sleeve GN 612.2 Steel Cam Action Indexing Plungers, Lock-Out, with Mounting Flange Type: A - Without plastic sleeve
GN 612.2 Steel Cam Action Indexing Plungers, Lock-Out, with Mounting Flange
GN 612.9 Zinc Die-Cast Cam Action Indexing Plungers, Lock-Out, with Mounting Flange
GN 612.9 Zinc Die-Cast Cam Action Indexing Plungers, Lock-Out, with Mounting Flange
GN 722.3 Steel Square Cam Action Spring Latches, Lock-Out, with Mounting Flange, Parallel to the Latch Pin Type: L - Left indexing cam<br />Finish: SW - Black, RAL 9005, textured finish GN 722.3 Steel Square Cam Action Spring Latches, Lock-Out, with Mounting Flange, Parallel to the Latch Pin Type: L - Left indexing cam<br />Finish: ZB - Zinc plated, blue passivated finish GN 722.3 Steel Square Cam Action Spring Latches, Lock-Out, with Mounting Flange, Parallel to the Latch Pin Type: R - Right indexing cam<br />Finish: SW - Black, RAL 9005, textured finish GN 722.3 Steel Square Cam Action Spring Latches, Lock-Out, with Mounting Flange, Parallel to the Latch Pin Type: R - Right indexing cam<br />Finish: ZB - Zinc plated, blue passivated finish
GN 722.3 Steel Square Cam Action Spring Latches, Lock-Out, with Mounting Flange, Parallel to the Latch Pin
GN 722.3 Stainless Steel Square Cam Action Spring Latches, Lock-Out, with Mounting Flange, Parallel to the Latch Pin Type: R - Right indexing cam GN 722.3 Stainless Steel Square Cam Action Spring Latches, Lock-Out, with Mounting Flange, Parallel to the Latch Pin Type: L - Left indexing cam
GN 722.3 Stainless Steel Square Cam Action Spring Latches, Lock-Out, with Mounting Flange, Parallel to the Latch Pin

3.2 Mounting, Positioning, Leveling with Screws, Clamping and Supporting Elements

GN 505.4 Steel Serrated T-Slot Bolts, for Aluminum Profiles
GN 505.4 Steel Serrated T-Slot Bolts, for Aluminum Profiles
GN 505.5 Stainless Steel Serrated T-Slot Bolts, for Aluminum Profiles
GN 505.5 Stainless Steel Serrated T-Slot Bolts, for Aluminum Profiles
GN 505 Steel Serrated Quarter-Turn T-Slot Nuts, for Aluminum Profiles
GN 505 Steel Serrated Quarter-Turn T-Slot Nuts, for Aluminum Profiles
GN 506 Steel Roll-In T-Slot Nuts, for Aluminum Profiles, with Guide Step
GN 506 Steel Roll-In T-Slot Nuts, for Aluminum Profiles, with Guide Step
GN 506.1 Steel Roll-In T-Slot Nuts, for Aluminum Profiles, without Guide Step
GN 506.1 Steel Roll-In T-Slot Nuts, for Aluminum Profiles, without Guide Step
GN 506.1 Stainess Steel Roll-In T-Slot Nuts, for Aluminum Profiles, without Guide Step
GN 506.1 Stainess Steel Roll-In T-Slot Nuts, for Aluminum Profiles, without Guide Step
GN 506.2 Steel Roll-In T-Slot Nuts, for Aluminum Profiles, with Spring Leaf
GN 506.2 Steel Roll-In T-Slot Nuts, for Aluminum Profiles, with Spring Leaf
GN 507 Steel T-Slot Nuts, for Aluminum Profiles
GN 507 Steel T-Slot Nuts, for Aluminum Profiles
GN 965 Steel T-Nut Assemblies for 30 / 40 mm Profile Systems Type: A - Socket cap screw DIN 912 GN 965 Steel T-Nut Assemblies for 30 / 40 mm Profile Systems Type: B - Countersunk screw DIN 7991 GN 965 Steel T-Nut Assemblies for 30 / 40 mm Profile Systems Type: C - Socket button head screw ISO 7380 GN 965 Steel T-Nut Assemblies for 30 / 40 mm Profile Systems Type: D - Socket cap screw DIN 7984
GN 965 Steel T-Nut Assemblies for 30 / 40 mm Profile Systems
GN 968 Steel T-Nut Assemblies, for 30 / 40 / 45 mm Profile Systems Type: A - Socket cap screw DIN 912 GN 968 Steel T-Nut Assemblies, for 30 / 40 / 45 mm Profile Systems Type: B - Countersunk screw DIN 7991 GN 968 Steel T-Nut Assemblies, for 30 / 40 / 45 mm Profile Systems Type: C - Socket button head screw ISO 7380 GN 968 Steel T-Nut Assemblies, for 30 / 40 / 45 mm Profile Systems Type: D - Socket cap screw DIN 7984
GN 968 Steel T-Nut Assemblies, for 30 / 40 / 45 mm Profile Systems

3.3 Hinging, Latching, Locking of Doors and Covers

GN 936 Zinc Die-Cast Slam Latches / Slam Locks Type: SCL - Lockable (Keyed alike)<br />Color: SW - Black, RAL 9005, textured finish GN 936 Zinc Die-Cast Slam Latches / Slam Locks Type: SCL - Lockable (Keyed alike)<br />Color: SR - Silver, RAL 9006, textured finish GN 936 Zinc Die-Cast Slam Latches / Slam Locks Type: SL - Not lockable<br />Color: SR - Silver, RAL 9006, textured finish GN 936 Zinc Die-Cast Slam Latches / Slam Locks Type: SL - Not lockable<br />Color: SW - Black, RAL 9005, textured finish
GN 936 Zinc Die-Cast Slam Latches / Slam Locks
EN 449.1 Technopolymer Plastic Snap Door Latches, Adjustable, with Cover Caps Type: A - Snap latch without hook, without finger handle<br />Color: LG - Gray, matte finish EN 449.1 Technopolymer Plastic Snap Door Latches, Adjustable, with Cover Caps Type: A - Snap latch without hook, without finger handle<br />Color: SW - Black, matte finish EN 449.1 Technopolymer Plastic Snap Door Latches, Adjustable, with Cover Caps Type: B - Snap latch with hook, with finger handle<br />Color: LG - Gray, matte finish EN 449.1 Technopolymer Plastic Snap Door Latches, Adjustable, with Cover Caps Type: B - Snap latch with hook, with finger handle<br />Color: SW - Black, matte finish
EN 449.1 Technopolymer Plastic Snap Door Latches, Adjustable, with Cover Caps
GN 4490 Zinc Die-Cast Ball Catches Color: SW - Black, RAL 9005, textured finish GN 4490 Zinc Die-Cast Ball Catches Color: SR - Silver, RAL 9006, textured finish
GN 4490 Zinc Die-Cast Ball Catches
EN 449.4 Technopolymer Plastic Snap Latches, with Gripping Tray
NEW EN 449.4 Technopolymer Plastic Snap Latches, with Gripping Tray
GN 4490 Stainless Steel AISI 630 Ball Catches
GN 4490 Stainless Steel AISI 630 Ball Catches
GN 938 Zinc Die-Cast Hinges, for Panels (Door Panes) Material: ZD - Zinc die-cast<br />Finish: SW - Black, RAL 9005, textured finish GN 938 Zinc Die-Cast Hinges, for Panels (Door Panes) Material: ZD - Zinc die-cast<br />Finish: SR - Silver, RAL 9006, textured finish
NEW GN 938 Zinc Die-Cast Hinges, for Panels (Door Panes)
EN 239.3 Technopolymer Plastic Hinges without Switch, to Accompany EN 239.4 Hinges with Integrated Switch
EN 239.3 Technopolymer Plastic Hinges without Switch, to Accompany EN 239.4 Hinges with Integrated Switch
EN 239.7 Technopolymer Plastic Hinges without Switch, to Accompany EN 239.6 Hinges with Integrated Safety Switch Test1: 70 EN 239.7 Technopolymer Plastic Hinges without Switch, to Accompany EN 239.6 Hinges with Integrated Safety Switch Test1: 110
EN 239.7 Technopolymer Plastic Hinges without Switch, to Accompany EN 239.6 Hinges with Integrated Safety Switch
GN 2295 Aluminum Triple Winged Hinges, for Profile Systems / Panel Elements Type: A - Exterior hinge wings<br />Identification: C - With countersunk holes<br />Bildzuordnung: 125 GN 2295 Aluminum Triple Winged Hinges, for Profile Systems / Panel Elements Type: A - Exterior hinge wings<br />Identification: C - With countersunk holes<br />Bildzuordnung: 165 / 335 GN 2295 Aluminum Triple Winged Hinges, for Profile Systems / Panel Elements Type: A - Exterior hinge wings<br />Identification: C - With countersunk holes<br />Bildzuordnung: 485 GN 2295 Aluminum Triple Winged Hinges, for Profile Systems / Panel Elements Type: I - Interior hinge wings<br />Identification: C - With countersunk holes<br />Bildzuordnung: 125 GN 2295 Aluminum Triple Winged Hinges, for Profile Systems / Panel Elements Type: I - Interior hinge wings<br />Identification: C - With countersunk holes<br />Bildzuordnung: 165 / 335 GN 2295 Aluminum Triple Winged Hinges, for Profile Systems / Panel Elements Type: I - Interior hinge wings<br />Identification: C - With countersunk holes<br />Bildzuordnung: 485
GN 2295 Aluminum Triple Winged Hinges, for Profile Systems / Panel Elements
GN 2295 Aluminum Triple Winged Hinges, for Profile Systems / Panel Elements, with Extended Outer Wings Type: A - Exterior hinge wings<br />Identification: C - With countersunk holes<br />Bildzuordnung: 245 GN 2295 Aluminum Triple Winged Hinges, for Profile Systems / Panel Elements, with Extended Outer Wings Type: A - Exterior hinge wings<br />Identification: C - With countersunk holes<br />Bildzuordnung: 415 GN 2295 Aluminum Triple Winged Hinges, for Profile Systems / Panel Elements, with Extended Outer Wings Type: A - Exterior hinge wings<br />Identification: C - With countersunk holes<br />Bildzuordnung: 565 GN 2295 Aluminum Triple Winged Hinges, for Profile Systems / Panel Elements, with Extended Outer Wings Type: I - Interior hinge wings<br />Identification: C - With countersunk holes<br />Bildzuordnung: 245 GN 2295 Aluminum Triple Winged Hinges, for Profile Systems / Panel Elements, with Extended Outer Wings Type: I - Interior hinge wings<br />Identification: C - With countersunk holes<br />Bildzuordnung: 415 GN 2295 Aluminum Triple Winged Hinges, for Profile Systems / Panel Elements, with Extended Outer Wings Type: I - Interior hinge wings<br />Identification: C - With countersunk holes<br />Bildzuordnung: 565
GN 2295 Aluminum Triple Winged Hinges, for Profile Systems / Panel Elements, with Extended Outer Wings
GN 2291 Aluminum Hinge Wings, for Use with Aluminum Profiles / Panel Elements Type: AF - Exterior hinge wing<br />Identification: A - Without bores GN 2291 Aluminum Hinge Wings, for Use with Aluminum Profiles / Panel Elements Type: AN - Exterior hinge wing, with positioning guide<br />Identification: A - Without bores GN 2291 Aluminum Hinge Wings, for Use with Aluminum Profiles / Panel Elements Type: IF - Interior hinge wing<br />Identification: A - Without bores GN 2291 Aluminum Hinge Wings, for Use with Aluminum Profiles / Panel Elements Type: IN - Interior hinge wing, with positioning guide<br />Identification: A - Without bores GN 2291 Aluminum Hinge Wings, for Use with Aluminum Profiles / Panel Elements Type: AF - Exterior hinge wing<br />Identification: C - With countersunk holes<br />Bildzuordnung: 40 GN 2291 Aluminum Hinge Wings, for Use with Aluminum Profiles / Panel Elements Type: AN - Exterior hinge wing, with positioning guide<br />Identification: C - With countersunk holes<br />Bildzuordnung: 40 GN 2291 Aluminum Hinge Wings, for Use with Aluminum Profiles / Panel Elements Type: IF - Interior hinge wing<br />Identification: C - With countersunk holes<br />Bildzuordnung: 40 GN 2291 Aluminum Hinge Wings, for Use with Aluminum Profiles / Panel Elements Type: IN - Interior hinge wing, with positioning guide<br />Identification: C - With countersunk holes<br />Bildzuordnung: 40
GN 2291 Aluminum Hinge Wings, for Use with Aluminum Profiles / Panel Elements
EN 159 Technopolymer Plastic Hinges, for Profile Systems Color: SW - Black, matte finish<br />Identification no.: 1 - Without safety adjustable levers EN 159 Technopolymer Plastic Hinges, for Profile Systems Color: LG - Gray, matte finish<br />Identification no.: 1 - Without safety adjustable levers EN 159 Technopolymer Plastic Hinges, for Profile Systems Color: LG - Gray, matte finish<br />Identification no.: 2 - With safety adjustable levers EN 159 Technopolymer Plastic Hinges, for Profile Systems Color: SW - Black, matte finish<br />Identification no.: 2 - With safety adjustable levers
EN 159 Technopolymer Plastic Hinges, for Profile Systems
EN 159.1 Technopolymer Plastic Double Hinges, for Profile Systems Color: LG - Gray, matte finish EN 159.1 Technopolymer Plastic Double Hinges, for Profile Systems Color: SW - Black, matte finish
EN 159.1 Technopolymer Plastic Double Hinges, for Profile Systems
GN 161 Zinc Die-Cast Hinges, for Profile Systems
GN 161 Zinc Die-Cast Hinges, for Profile Systems
GN 127 Zinc Die-Cast Hinges, Adjustable, with Alignment Bushings Type: B - Horizontal slots<br />Color: SW - Black, RAL 9005, textured finish GN 127 Zinc Die-Cast Hinges, Adjustable, with Alignment Bushings Type: B - Horizontal slots<br />Color: SR - Silver, RAL 9006, textured finish GN 127 Zinc Die-Cast Hinges, Adjustable, with Alignment Bushings Type: H - Vertical slots<br />Color: SR - Silver, RAL 9006, textured finish GN 127 Zinc Die-Cast Hinges, Adjustable, with Alignment Bushings Type: H - Vertical slots<br />Color: SW - Black, RAL 9005, textured finish GN 127 Zinc Die-Cast Hinges, Adjustable, with Alignment Bushings Type: HB - Horizontal and vertical slots<br />Color: SR - Silver, RAL 9006, textured finish GN 127 Zinc Die-Cast Hinges, Adjustable, with Alignment Bushings Type: HB - Horizontal and vertical slots<br />Color: SW - Black, RAL 9005, textured finish
GN 127 Zinc Die-Cast Hinges, Adjustable, with Alignment Bushings
GN 127 Stainless Steel Hinges, Adjustable, with Alignment Bushings Material: A4 - Stainless steel<br />Type: B - Horizontal slots GN 127 Stainless Steel Hinges, Adjustable, with Alignment Bushings Material: A4 - Stainless steel<br />Type: H - Vertical slots GN 127 Stainless Steel Hinges, Adjustable, with Alignment Bushings Material: A4 - Stainless steel<br />Type: HB - Horizontal and vertical slots
GN 127 Stainless Steel Hinges, Adjustable, with Alignment Bushings
EN 236 Technopolymer Plastic Hinges, Adjustable, with Alignment Bushings
EN 236 Technopolymer Plastic Hinges, Adjustable, with Alignment Bushings
EN 151.4 Technopolymer Plastic Hinges, Adjustable, with Slotted Holes Type: B - Horizontal slots EN 151.4 Technopolymer Plastic Hinges, Adjustable, with Slotted Holes Type: H - Vertical slots EN 151.4 Technopolymer Plastic Hinges, Adjustable, with Slotted Holes Type: HB - Horizontal and vertical slots
EN 151.4 Technopolymer Plastic Hinges, Adjustable, with Slotted Holes
GN 2292 Aluminum Double Winged Lift-Off Hinges, for Profile Systems, with Positioning Guide Type: A - Exterior hinge wings<br />Identification: C - With countersunk holes<br />Bildzuordnung: 82 GN 2292 Aluminum Double Winged Lift-Off Hinges, for Profile Systems, with Positioning Guide Type: A - Exterior hinge wings<br />Identification: C - With countersunk holes<br />Bildzuordnung: 162 GN 2292 Aluminum Double Winged Lift-Off Hinges, for Profile Systems, with Positioning Guide Type: I - Interior hinge wings<br />Identification: C - With countersunk holes<br />Bildzuordnung: 162 GN 2292 Aluminum Double Winged Lift-Off Hinges, for Profile Systems, with Positioning Guide Type: I - Interior hinge wings<br />Identification: C - With countersunk holes<br />Bildzuordnung: 82
GN 2292 Aluminum Double Winged Lift-Off Hinges, for Profile Systems, with Positioning Guide
GN 2294 Aluminum Double Winged Lift-Off Hinges, for Profile Systems / Panel Elements Type: A - Exterior hinge wings<br />Identification: C - With countersunk holes<br />Bildzuordnung: 82 GN 2294 Aluminum Double Winged Lift-Off Hinges, for Profile Systems / Panel Elements Type: A - Exterior hinge wings<br />Identification: C - With countersunk holes<br />Bildzuordnung: 162 GN 2294 Aluminum Double Winged Lift-Off Hinges, for Profile Systems / Panel Elements Type: I - Interior hinge wings<br />Identification: C - With countersunk holes<br />Bildzuordnung: 162 GN 2294 Aluminum Double Winged Lift-Off Hinges, for Profile Systems / Panel Elements Type: I - Interior hinge wings<br />Identification: C - With countersunk holes<br />Bildzuordnung: 82
GN 2294 Aluminum Double Winged Lift-Off Hinges, for Profile Systems / Panel Elements
GN 139.3 Steel Flat Mounting Plates, for GN 139.1 / GN 139.2 Hinges
GN 139.3 Steel Flat Mounting Plates, for GN 139.1 / GN 139.2 Hinges
GN 139.4 Zinc Die-Cast Angled Mounting Plates, for GN 139.1 / GN 139.2 Hinges
GN 139.4 Zinc Die-Cast Angled Mounting Plates, for GN 139.1 / GN 139.2 Hinges
EN 239.6 Technopolymer Plastic Hinges with Integrated Safety Switch, with Connector Cable Type: AK - Cable at the top EN 239.6 Technopolymer Plastic Hinges with Integrated Safety Switch, with Connector Cable Type: BK - Cable at the bottom EN 239.6 Technopolymer Plastic Hinges with Integrated Safety Switch, with Connector Cable Type: CK - Cable at the backside
EN 239.6 Technopolymer Plastic Hinges with Integrated Safety Switch, with Connector Cable
EN 239.6 Technopolymer Plastic Hinges with Integrated Safety Switch, with Connector Plug Type: CSK - Connector plug at the backside (with 0.2 m cable) EN 239.6 Technopolymer Plastic Hinges with Integrated Safety Switch, with Connector Plug Type: AS - Connector plug at the top EN 239.6 Technopolymer Plastic Hinges with Integrated Safety Switch, with Connector Plug Type: BS - Connector plug at the bottom EN 239.6 Technopolymer Plastic Hinges with Integrated Safety Switch, with Connector Plug Type: CS - Connector plug at the backside
EN 239.6 Technopolymer Plastic Hinges with Integrated Safety Switch, with Connector Plug
EN 239.8 Technopolymer Plastic Flat Mounting Plates, for EN 239.6 / EN 239.7 Hinges
EN 239.8 Technopolymer Plastic Flat Mounting Plates, for EN 239.6 / EN 239.7 Hinges
EN 239.4 Technopolymer Plastic Hinges with Integrated Switch, with Connector Cable Identification: SL - Bores for contersunk screw, switch left<br />Type: AK - Cable at the top EN 239.4 Technopolymer Plastic Hinges with Integrated Switch, with Connector Cable Identification: SL - Bores for contersunk screw, switch left<br />Type: CK - Cable at the backside EN 239.4 Technopolymer Plastic Hinges with Integrated Switch, with Connector Cable Identification: SR - Bores for contersunk screw, switch right<br />Type: AK - Cable at the top EN 239.4 Technopolymer Plastic Hinges with Integrated Switch, with Connector Cable Identification: SR - Bores for contersunk screw, switch right<br />Type: CK - Cable at the backside
EN 239.4 Technopolymer Plastic Hinges with Integrated Switch, with Connector Cable
EN 239.4 Technopolymer Plastic Hinges with Integrated Switch, with Connector Plug Identification: SL - Bores for contersunk screw, switch left<br />Type: AS - Connector plug at the top EN 239.4 Technopolymer Plastic Hinges with Integrated Switch, with Connector Plug Identification: SL - Bores for contersunk screw, switch left<br />Type: CS - Connector plug at the backside EN 239.4 Technopolymer Plastic Hinges with Integrated Switch, with Connector Plug Identification: SR - Bores for contersunk screw, switch right<br />Type: AS - Connector plug at the top EN 239.4 Technopolymer Plastic Hinges with Integrated Switch, with Connector Plug Identification: SR - Bores for contersunk screw, switch right<br />Type: CS - Connector plug at the backside
EN 239.4 Technopolymer Plastic Hinges with Integrated Switch, with Connector Plug

3.7 Connecting, Assembling with Clamping and Connecting Elements

GN 134 Aluminum Two-Way Connector Clamps, Split Assembly d1/s1: B - Bore<br />d2/s2: V - Square<br />Finish: SW - Black, RAL 9005, textured finish GN 134 Aluminum Two-Way Connector Clamps, Split Assembly d1/s1: B - Bore<br />d2/s2: B - Bore<br />Finish: BL - Plain finish, Matte shot-blasted finish GN 134 Aluminum Two-Way Connector Clamps, Split Assembly d1/s1: B - Bore<br />d2/s2: B - Bore<br />Finish: SW - Black, RAL 9005, textured finish GN 134 Aluminum Two-Way Connector Clamps, Split Assembly d1/s1: B - Bore<br />d2/s2: V - Square<br />Finish: BL - Plain finish, Matte shot-blasted finish GN 134 Aluminum Two-Way Connector Clamps, Split Assembly d1/s1: V - Square<br />d2/s2: V - Square<br />Finish: BL - Plain finish, Matte shot-blasted finish GN 134 Aluminum Two-Way Connector Clamps, Split Assembly d1/s1: V - Square<br />d2/s2: V - Square<br />Finish: SW - Black, RAL 9005, textured finish
GN 134 Aluminum Two-Way Connector Clamps, Split Assembly
GN 135 Aluminum Two-Way Connector Clamps, Multi-Part Assembly, Unequal Bore Dimensions Finish: SW - Black, RAL 9005, textured finish GN 135 Aluminum Two-Way Connector Clamps, Multi-Part Assembly, Unequal Bore Dimensions Finish: BL - Plain finish, Matte shot-blasted finish
GN 135 Aluminum Two-Way Connector Clamps, Multi-Part Assembly, Unequal Bore Dimensions
GN 141 Aluminum Flanged Two-Way Connector Clamps, Multi-Part Assembly Finish: SW - Black, RAL 9005, textured finish GN 141 Aluminum Flanged Two-Way Connector Clamps, Multi-Part Assembly Finish: BL - Plain finish, Matte shot-blasted finish
GN 141 Aluminum Flanged Two-Way Connector Clamps, Multi-Part Assembly
GN 146.3 Aluminum Flanged Connector Clamps, with 2 Mounting Holes Finish: SW - Black, RAL 9005, textured finish GN 146.3 Aluminum Flanged Connector Clamps, with 2 Mounting Holes Finish: BL - Plain finish, Matte shot-blasted finish
GN 146.3 Aluminum Flanged Connector Clamps, with 2 Mounting Holes
GN 147 Aluminum Flanged Connector Clamps, Split Assembly, with 4 Mounting Holes Bildvarianten: B - Bore<br />Finish: SW - Black, RAL 9005, textured finish GN 147 Aluminum Flanged Connector Clamps, Split Assembly, with 4 Mounting Holes Bildvarianten: B - Bore<br />Finish: BL - Plain finish, Matte shot-blasted finish GN 147 Aluminum Flanged Connector Clamps, Split Assembly, with 4 Mounting Holes Bildvarianten: V - Square<br />Finish: BL - Plain finish, Matte shot-blasted finish GN 147 Aluminum Flanged Connector Clamps, Split Assembly, with 4 Mounting Holes Bildvarianten: V - Square<br />Finish: SW - Black, RAL 9005, textured finish
GN 147 Aluminum Flanged Connector Clamps, Split Assembly, with 4 Mounting Holes
GN 147.3 Aluminum Flanged Connector Clamps, Split Assembly, with 6 Mounting Holes Bildzuordnung: B - Bore<br />Finish: BL - Plain finish, Matte shot-blasted finish GN 147.3 Aluminum Flanged Connector Clamps, Split Assembly, with 6 Mounting Holes Bildzuordnung: B - Bore<br />Finish: SW - Black, RAL 9005, textured finish GN 147.3 Aluminum Flanged Connector Clamps, Split Assembly, with 6 Mounting Holes Bildzuordnung: V - Square<br />Finish: BL - Plain finish, Matte shot-blasted finish GN 147.3 Aluminum Flanged Connector Clamps, Split Assembly, with 6 Mounting Holes Bildzuordnung: V - Square<br />Finish: SW - Black, RAL 9005, textured finish
GN 147.3 Aluminum Flanged Connector Clamps, Split Assembly, with 6 Mounting Holes
GN 194 Aluminum T-Angle Connector Clamps, Multi-Part Assembly Bildzuordnung1: B - Bore<br />Bildzuordnung2: B - Bore<br />Finish: BL - Plain finish, Matte shot-blasted finish GN 194 Aluminum T-Angle Connector Clamps, Multi-Part Assembly Bildzuordnung1: B - Bore<br />Bildzuordnung2: B - Bore<br />Finish: SW - Black, RAL 9005, textured finish GN 194 Aluminum T-Angle Connector Clamps, Multi-Part Assembly Bildzuordnung1: B - Bore<br />Bildzuordnung2: V - Square<br />Finish: BL - Plain finish, Matte shot-blasted finish GN 194 Aluminum T-Angle Connector Clamps, Multi-Part Assembly Bildzuordnung1: B - Bore<br />Bildzuordnung2: V - Square<br />Finish: SW - Black, RAL 9005, textured finish GN 194 Aluminum T-Angle Connector Clamps, Multi-Part Assembly Bildzuordnung1: V - Square<br />Bildzuordnung2: B - Bore<br />Finish: BL - Plain finish, Matte shot-blasted finish GN 194 Aluminum T-Angle Connector Clamps, Multi-Part Assembly Bildzuordnung1: V - Square<br />Bildzuordnung2: B - Bore<br />Finish: SW - Black, RAL 9005, textured finish GN 194 Aluminum T-Angle Connector Clamps, Multi-Part Assembly Bildzuordnung1: V - Square<br />Bildzuordnung2: V - Square<br />Finish: BL - Plain finish, Matte shot-blasted finish GN 194 Aluminum T-Angle Connector Clamps, Multi-Part Assembly Bildzuordnung1: V - Square<br />Bildzuordnung2: V - Square<br />Finish: SW - Black, RAL 9005, textured finish
GN 194 Aluminum T-Angle Connector Clamps, Multi-Part Assembly
GN 195 Aluminum T-Angle Connector Clamps, Multi-Part Assembly Bildzuordnung: B - Bore<br />Finish: SW - Black, RAL 9005, textured finish GN 195 Aluminum T-Angle Connector Clamps, Multi-Part Assembly Bildzuordnung: B - Bore<br />Finish: BL - Plain finish, Matte shot-blasted finish GN 195 Aluminum T-Angle Connector Clamps, Multi-Part Assembly Bildzuordnung: V - Square<br />Finish: BL - Plain finish, Matte shot-blasted finish GN 195 Aluminum T-Angle Connector Clamps, Multi-Part Assembly Bildzuordnung: V - Square<br />Finish: SW - Black, RAL 9005, textured finish
GN 195 Aluminum T-Angle Connector Clamps, Multi-Part Assembly
GN 231 Aluminum Tube Supports, Split Assembly Bildzuordnung: B - Bore<br />Finish: BL - Plain finish, Matte shot-blasted finish GN 231 Aluminum Tube Supports, Split Assembly Bildzuordnung: B - Bore<br />Finish: SW - Black, RAL 9005, textured finish GN 231 Aluminum Tube Supports, Split Assembly Bildzuordnung: V - Square<br />Finish: BL - Plain finish, Matte shot-blasted finish GN 231 Aluminum Tube Supports, Split Assembly Bildzuordnung: V - Square<br />Finish: SW - Black, RAL 9005, textured finish
GN 231 Aluminum Tube Supports, Split Assembly
GN 241 Aluminum Tube Connectors, Split Assembly Bildzuordnung: V - Square<br />Finish: SW - Black, RAL 9005, textured finish GN 241 Aluminum Tube Connectors, Split Assembly Bildzuordnung: B - Bore<br />Finish: BL - Plain finish, Matte shot-blasted finish GN 241 Aluminum Tube Connectors, Split Assembly Bildzuordnung: B - Bore<br />Finish: SW - Black, RAL 9005, textured finish GN 241 Aluminum Tube Connectors, Split Assembly Bildzuordnung: V - Square<br />Finish: BL - Plain finish, Matte shot-blasted finish
GN 241 Aluminum Tube Connectors, Split Assembly
GN 289 Aluminum Swivel Clamp Connector Joints, Split Assembly Finish: BL - Plain finish, Matte shot-blasted finish GN 289 Aluminum Swivel Clamp Connector Joints, Split Assembly Finish: SW - Black, RAL 9005, textured finish
GN 289 Aluminum Swivel Clamp Connector Joints, Split Assembly
GN 271.4 Aluminum Sensor Holders Finish: SW - Black, RAL 9005, textured finish
GN 271.4 Aluminum Sensor Holders
GN 473 Aluminum Base Plate Mounting Clamps Finish: MT - Matte, tumbled finish GN 473 Aluminum Base Plate Mounting Clamps Finish: ELS - Anodized finish, black
GN 473 Aluminum Base Plate Mounting Clamps
EN 175 Plastic Base Plate Mounting Clamps
EN 175 Plastic Base Plate Mounting Clamps
GN 477 Aluminum Mounting Clamps Finish: ELS - Anodized finish, black GN 477 Aluminum Mounting Clamps Finish: MT - Matte, tumbled finish
GN 477 Aluminum Mounting Clamps
GN 480 Steel, Flanged bolts
GN 480 Steel, Flanged bolts
EN 561 Plastic Mounting Angle Brackets, Type A Type of angle piece: A - 2 x slotted holes b<sub>2</sub>, without guide steps<br />Identification no.: 1 - Without cover cap EN 561 Plastic Mounting Angle Brackets, Type A Type of angle piece: A - 2 x slotted holes b<sub>2</sub>, without guide steps<br />Identification no.: 2 - With cover cap
EN 561 Plastic Mounting Angle Brackets, Type A
EN 561 Plastic Mounting Angle Brackets, Type B and C Type: B - 2 x bores d, with guide steps<br />Identification no.: 2 - With cover cap EN 561 Plastic Mounting Angle Brackets, Type B and C Type: B - 2 x bores d, with guide steps<br />Identification no.: 1 - Without cover cap EN 561 Plastic Mounting Angle Brackets, Type B and C Type: C - 1 x slotted hole b<sub>2</sub>, without guide steps, 1 x bore d, with guide steps<br />Identification no.: 1 - Without cover cap EN 561 Plastic Mounting Angle Brackets, Type B and C Type: C - 1 x slotted hole b<sub>2</sub>, without guide steps, 1 x bore d, with guide steps<br />Identification no.: 2 - With cover cap
EN 561 Plastic Mounting Angle Brackets, Type B and C
GN 961 Aluminum Angle Brackets, for 30 / 40 mmm Profile Systems, for Slot Widths 6 / 8 mm, Assembly with Roll-In T-Slot Nuts GN 506 Type: A - Without assembly set, without cover cap<br />Finish: SW - Black, RAL 9005, textured finish GN 961 Aluminum Angle Brackets, for 30 / 40 mmm Profile Systems, for Slot Widths 6 / 8 mm, Assembly with Roll-In T-Slot Nuts GN 506 Type: A - Without assembly set, without cover cap<br />Finish: MT - Matte, tumbled finish GN 961 Aluminum Angle Brackets, for 30 / 40 mmm Profile Systems, for Slot Widths 6 / 8 mm, Assembly with Roll-In T-Slot Nuts GN 506 Type: A - Without assembly set, without cover cap<br />Finish: SR - Silver, RAL 9006, textured finish GN 961 Aluminum Angle Brackets, for 30 / 40 mmm Profile Systems, for Slot Widths 6 / 8 mm, Assembly with Roll-In T-Slot Nuts GN 506 Type: B - With assembly set, with cover cap<br />Finish: MT - Matte, tumbled finish GN 961 Aluminum Angle Brackets, for 30 / 40 mmm Profile Systems, for Slot Widths 6 / 8 mm, Assembly with Roll-In T-Slot Nuts GN 506 Type: B - With assembly set, with cover cap<br />Finish: SR - Silver, RAL 9006, textured finish GN 961 Aluminum Angle Brackets, for 30 / 40 mmm Profile Systems, for Slot Widths 6 / 8 mm, Assembly with Roll-In T-Slot Nuts GN 506 Type: B - With assembly set, with cover cap<br />Finish: SW - Black, RAL 9005, textured finish GN 961 Aluminum Angle Brackets, for 30 / 40 mmm Profile Systems, for Slot Widths 6 / 8 mm, Assembly with Roll-In T-Slot Nuts GN 506 Type: C - With assembly set, without cover cap<br />Finish: MT - Matte, tumbled finish GN 961 Aluminum Angle Brackets, for 30 / 40 mmm Profile Systems, for Slot Widths 6 / 8 mm, Assembly with Roll-In T-Slot Nuts GN 506 Type: C - With assembly set, without cover cap<br />Finish: SR - Silver, RAL 9006, textured finish GN 961 Aluminum Angle Brackets, for 30 / 40 mmm Profile Systems, for Slot Widths 6 / 8 mm, Assembly with Roll-In T-Slot Nuts GN 506 Type: C - With assembly set, without cover cap<br />Finish: SW - Black, RAL 9005, textured finish
GN 961 Aluminum Angle Brackets, for 30 / 40 mmm Profile Systems, for Slot Widths 6 / 8 mm, Assembly with Roll-In T-Slot Nuts GN 506
GN 960 Aluminum Angle Brackets, for 30/40/45 mm Profile Systems, for Slot Widths 8 / 10 mm, Assembly with T-Slot Nuts / T-Slot Bolts Type of angle piece: A - Without assembly set, without cover cap<br />Finish: MT - Matte, tumbled finish GN 960 Aluminum Angle Brackets, for 30/40/45 mm Profile Systems, for Slot Widths 8 / 10 mm, Assembly with T-Slot Nuts / T-Slot Bolts Type of angle piece: A - Without assembly set, without cover cap<br />Finish: SR - Silver, RAL 9006, textured finish GN 960 Aluminum Angle Brackets, for 30/40/45 mm Profile Systems, for Slot Widths 8 / 10 mm, Assembly with T-Slot Nuts / T-Slot Bolts Type of angle piece: A - Without assembly set, without cover cap<br />Finish: SW - Black, RAL 9005, textured finish GN 960 Aluminum Angle Brackets, for 30/40/45 mm Profile Systems, for Slot Widths 8 / 10 mm, Assembly with T-Slot Nuts / T-Slot Bolts Type of angle piece: B - With assembly set, with cover cap<br />Finish: MT - Matte, tumbled finish GN 960 Aluminum Angle Brackets, for 30/40/45 mm Profile Systems, for Slot Widths 8 / 10 mm, Assembly with T-Slot Nuts / T-Slot Bolts Type of angle piece: B - With assembly set, with cover cap<br />Finish: SR - Silver, RAL 9006, textured finish GN 960 Aluminum Angle Brackets, for 30/40/45 mm Profile Systems, for Slot Widths 8 / 10 mm, Assembly with T-Slot Nuts / T-Slot Bolts Type of angle piece: B - With assembly set, with cover cap<br />Finish: SW - Black, RAL 9005, textured finish GN 960 Aluminum Angle Brackets, for 30/40/45 mm Profile Systems, for Slot Widths 8 / 10 mm, Assembly with T-Slot Nuts / T-Slot Bolts Type of angle piece: C - With assembly set, without cover cap<br />Finish: MT - Matte, tumbled finish GN 960 Aluminum Angle Brackets, for 30/40/45 mm Profile Systems, for Slot Widths 8 / 10 mm, Assembly with T-Slot Nuts / T-Slot Bolts Type of angle piece: C - With assembly set, without cover cap<br />Finish: SR - Silver, RAL 9006, textured finish GN 960 Aluminum Angle Brackets, for 30/40/45 mm Profile Systems, for Slot Widths 8 / 10 mm, Assembly with T-Slot Nuts / T-Slot Bolts Type of angle piece: C - With assembly set, without cover cap<br />Finish: SW - Black, RAL 9005, textured finish
GN 960 Aluminum Angle Brackets, for 30/40/45 mm Profile Systems, for Slot Widths 8 / 10 mm, Assembly with T-Slot Nuts / T-Slot Bolts
GN 967 Sheet Steel Connecting Brackets, Flat or L-Shaped, for Profile Systems Type: F - Flat<br />Finish: SW - Black, RAL 9005, textured finish<br />Identification no.: 1 - With bore for countersunk screws DIN 7991 GN 967 Sheet Steel Connecting Brackets, Flat or L-Shaped, for Profile Systems Type: F - Flat<br />Finish: SR - Silver, RAL 9006, textured finish<br />Identification no.: 1 - With bore for countersunk screws DIN 7991 GN 967 Sheet Steel Connecting Brackets, Flat or L-Shaped, for Profile Systems Type: F - Flat<br />Finish: SW - Black, RAL 9005, textured finish<br />Identification no.: 2 - With bore without countersunk GN 967 Sheet Steel Connecting Brackets, Flat or L-Shaped, for Profile Systems Type: F - Flat<br />Finish: ZB - Zinc plated, blue passivated finish<br />Identification no.: 2 - With bore without countersunk GN 967 Sheet Steel Connecting Brackets, Flat or L-Shaped, for Profile Systems Type: L - L-shaped<br />Finish: SR - Silver, RAL 9006, textured finish<br />Identification no.: 2 - With bore without countersunk GN 967 Sheet Steel Connecting Brackets, Flat or L-Shaped, for Profile Systems Type: L - L-shaped<br />Finish: SW - Black, RAL 9005, textured finish<br />Identification no.: 1 - With bore for countersunk screws DIN 7991 GN 967 Sheet Steel Connecting Brackets, Flat or L-Shaped, for Profile Systems Type: L - L-shaped<br />Finish: ZB - Zinc plated, blue passivated finish<br />Identification no.: 2 - With bore without countersunk
GN 967 Sheet Steel Connecting Brackets, Flat or L-Shaped, for Profile Systems
GN 3490 Steel Precision Casting Threaded Flanges, for Profile Systems Finish: SW - Black, RAL 9005, textured finish GN 3490 Steel Precision Casting Threaded Flanges, for Profile Systems Finish: ZB - Zinc plated, blue passivated finish
GN 3490 Steel Precision Casting Threaded Flanges, for Profile Systems
GN 939 Zinc Die-Cast Panel Support Clamps, for Glass and Plastic Panels Type: E - Corner clamp<br />Finish: SW - Black, RAL 9005, textured finish GN 939 Zinc Die-Cast Panel Support Clamps, for Glass and Plastic Panels Type: E - Corner clamp<br />Finish: SR - Silver, RAL 9006, textured finish GN 939 Zinc Die-Cast Panel Support Clamps, for Glass and Plastic Panels Type: F - Surface clamp<br />Finish: SR - Silver, RAL 9006, textured finish GN 939 Zinc Die-Cast Panel Support Clamps, for Glass and Plastic Panels Type: F - Surface clamp<br />Finish: SW - Black, RAL 9005, textured finish
NEW GN 939 Zinc Die-Cast Panel Support Clamps, for Glass and Plastic Panels
GN 938.1 Zinc Die-Cast T-Nuts, for Hinges GN 938 and Panel Support Clamps GN 939 Bildvarianten: ZD-6 GN 938.1 Zinc Die-Cast T-Nuts, for Hinges GN 938 and Panel Support Clamps GN 939 GN 938.1 Zinc Die-Cast T-Nuts, for Hinges GN 938 and Panel Support Clamps GN 939 Bildvarianten: ZD-8
NEW GN 938.1 Zinc Die-Cast T-Nuts, for Hinges GN 938 and Panel Support Clamps GN 939
EN 649 Plastic Panel Support Clamp, Ergostyle®
EN 649 Plastic Panel Support Clamp, Ergostyle®

3.9 Holding with Magnets

GN 4470 Zinc Die-Cast Magnetic Catches, with Rubberized Magnetic Surface Type: A1 - Magnetic surface top, with bore<br />Identification: L2 - With strike plate, L-profile, with slotted hole<br />Finish: SR - Silver, RAL 9006, textured finish GN 4470 Zinc Die-Cast Magnetic Catches, with Rubberized Magnetic Surface Type: A2 - Magnetic surface top, with slotted hole<br />Identification: W - Without strike plate<br />Finish: SW - Black, RAL 9005, textured finish GN 4470 Zinc Die-Cast Magnetic Catches, with Rubberized Magnetic Surface Type: C1 - Magnetic surface side, with bore<br />Identification: L3 - With strike plate, L-profile, with slotted hole, extended<br />Finish: SR - Silver, RAL 9006, textured finish GN 4470 Zinc Die-Cast Magnetic Catches, with Rubberized Magnetic Surface Type: C2 - Magnetic surface side, with slotted hole<br />Identification: F - With strike plate, with countersunk hole<br />Finish: SW - Black, RAL 9005, textured finish GN 4470 Zinc Die-Cast Magnetic Catches, with Rubberized Magnetic Surface Type: C2 - Magnetic surface side, with slotted hole<br />Identification: Z2 - With strike plate, Z-profile, with slotted hole<br />Finish: SW - Black, RAL 9005, textured finish
GN 4470 Zinc Die-Cast Magnetic Catches, with Rubberized Magnetic Surface
GN 56 Plastic Retaining Magnets, for Use with Profile Systems
GN 56 Plastic Retaining Magnets, for Use with Profile Systems
Your Contact

You are looking for a Winco partner near you? Please select the country.

JW Winco Services

Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM Central Time

+1-800-877-8351 sales@jwwinco.com
Request Callback
An error has occurred!
We have received your callback request and will contact you soon.