Indexing Plungers GN 413

Material: NI - Stainless steel
Type: A - Non lock-out, without lock nut

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

corrosion-resistant
precise fit
environmentally friendly

Show all Stainless Steel products

List of Indexing Plunger Types Load Rating Information ISO Fundamental Tolerances Stainless Steel Characteristics

Product description

Indexing plungers GN 413, due to its shape, the pull ring can be used both as a screw-in aid during assembly, and to retract the plunger pin for positioning or locking the pin in the retracted position (Type C / CK).

Lock-out types C / CK are used for applications where the plunger pin needs to stay in its retracted position. To achieve this, the pull ring is rotated by 90 degrees after being retracted. A notch keeps the plunger in the retracted position.

Specification

Threaded body
Stainless steelNI AISI 303

Plunger pin
Stainless steel AISI 303
Chemically nickel plated

Spring
Stainless steel AISI 301

Pull ring
Stainless steel AISI 301

Lock nut
DIN 439 B / ISO 4035 / ISO 8675
Stainless steel (A2)

RoHS

Accessory

GN 412.4 Locating Bushings
GN 412.5 Locating Bushings with Tapered Flange
GN 612.1 Mounting Blocks
GN 909.5 Thin Hex Nuts (Stainless Steel)

Your Contact

You are looking for a Winco partner near you?

Part Number A - Non lock-out, without lock nut	Part Number AK - Non lock-out, with lock nut	Part Number C - Lock-out, without lock nut	Part Number CK - Lock-out, with lock nut	d₁ Pin -0.0008 / -0.004 Bore H7	d₂	d₂	d₃	l₁ min.	l₂	l₃	l₄	m	Spring load ≈ Initial	End


413-5-M10-A-NI	413-5-M10-AK-NI	413-5-M10-C-NI	413-5-M10-CK-NI	0.197 -0.0008 / -0.004 / H7	M 10	-	0.06	0.20	0.87	1.10	0.91	0.71	1.12 lbf (5 N)	3.37 lbf (15 N)
413-5-M10X1-A-NI	413-5-M10X1-AK-NI	413-5-M10X1-C-NI	413-5-M10X1-CK-NI	0.197 -0.0008 / -0.004 / H7	-	M 10 x 1	0.06	0.20	0.87	1.10	0.91	0.71	1.12 lbf (5 N)	3.37 lbf (15 N)
413-6-M12-A-NI	413-6-M12-AK-NI	413-6-M12-C-NI	413-6-M12-CK-NI	0.236 -0.0008 / -0.004 / H7	M 12	-	0.08	0.24	0.94	1.22	0.98	0.87	1.35 lbf (6 N)	4.72 lbf (21 N)
413-6-M12X1.5-A-NI	413-6-M12X1.5-AK-NI	413-6-M12X1.5-C-NI	413-6-M12X1.5-CK-NI	0.236 -0.0008 / -0.004 / H7	-	M 12 x 1.5	0.08	0.24	0.94	1.22	0.98	0.87	1.35 lbf (6 N)	4.72 lbf (21 N)
413-8-M16-A-NI	413-8-M16-AK-NI	413-8-M16-C-NI	413-8-M16-CK-NI	0.315 -0.0008 / -0.004 / H7	M 16	-	0.08	0.35	1.34	1.73	0.98	0.87	1.57 lbf (7 N)	6.07 lbf (27 N)
413-8-M16X1.5-A-NI	413-8-M16X1.5-AK-NI	413-8-M16X1.5-C-NI	413-8-M16X1.5-CK-NI	0.315 -0.0008 / -0.004 / H7	-	M 16 x 1.5	0.08	0.35	1.34	1.73	0.98	0.87	1.57 lbf (7 N)	6.07 lbf (27 N)
413-10-M16-A-NI	413-10-M16-AK-NI	413-10-M16-C-NI	413-10-M16-CK-NI	0.394 -0.0008 / -0.004 / H7	M 16	-	0.08	0.35	1.34	1.73	0.98	0.87	1.57 lbf (7 N)	6.07 lbf (27 N)
413-10-M16X1.5-A-NI	413-10-M16X1.5-AK-NI	413-10-M16X1.5-C-NI	413-10-M16X1.5-CK-NI	0.394 -0.0008 / -0.004 / H7	-	M 16 x 1.5	0.08	0.35	1.34	1.73	0.98	0.87	1.57 lbf (7 N)	6.07 lbf (27 N)

d₁ Pin -0.0008 / -0.004 Bore H7	d₂	d₂	d₃	l₁ min.	l₂	l₃	l₄	m	Spring load ≈ Initial	End

0.197	M 10	M 10 x 1	0.06	0.20	0.87	1.10	0.91	0.71	1.12 lbf (5 N)	3.37 lbf (15 N)
0.236	M 12	M 12 x 1.5	0.08	0.24	0.94	1.22	0.98	0.87	1.35 lbf (6 N)	4.72 lbf (21 N)
0.315	M 16	M 16 x 1.5	0.08	0.35	1.34	1.73	0.98	0.87	1.57 lbf (7 N)	6.07 lbf (27 N)
0.394	M 16	M 16 x 1.5	0.08	0.35	1.34	1.73	0.98	0.87	1.57 lbf (7 N)	6.07 lbf (27 N)