GN 722.4Indexing PlungersStainless Steel, Lock-Out, Weldable, with Pull Ring
Photo
Type: T - Round, with pull ring, fixed (riveted)
Product Family Stainless Steel
Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.
With indexing plungers GN 722.4, the plunger pin is actuated via the pull ring. This is done either manually, with a cable or by means of an extended pull rod with hook. The A4 stainless steel version is suitable for use in particularly aggressive environments.
The types with a rest position are used when the plunger pin should temporarily not protrude. For this purpose, the pull ring is turned sideways after the locking pin has been retracted. The ring is held in this position by the catch recess at the top of the guide.
The dimensional tolerances between plunger pin and guide are selected so that the functional reliability is guaranteed even after welding, applying a corrosion protection layer, or in case of contamination.
The unassembled types CU / TU are recommended to avoid changing the microstructure of the spring and plunger during the welding process. After welding, the indexing plunger is then assembled.
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Weight: 0.324 lbs
If weight is not listed, please contact our Sales Department for additional information regarding weight. Phone: 800-877-8351