GN 416 indexing plunger latch mechanisms are operated by an axial pulling of the latch lever. This kind of operation from the top side is advantageous in certain installation situations.
The plunger pins of type S are engaged in the housing to prevent rotation, and therefore lock in the starting position but not the retracted position. Types R1 and L1 offer a locking function in the starting as well as in the retracted position, preventing unintentional operation. A lock notch holds the latch lever in both positions.
The fastening range is designed so that ISO 7092 washers can be used.
In addition to using metric fasteners for mounting:
- where b4 = 5.4 mm, #10-32 socket cap screws can be used
- where b4 = 6.4 mm, #1/4-20 socket cap screws can be used
Black, RAL 9005, textured finish
Steel, zinc plated, blue passivated finish
Stainless steel AISI 301
Technopolymer (Polyamide PA)
Temperature resistant up to 230 °F (110 °C)
Black, matte finish
Locators GN 416.1
Hide technical drawing
Part Options / Table
Without latching, non lock-out
Latching / lock-out via counter-clockwise rotation
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Weight: 0.147 lbs
If weight is not listed, please contact our Sales Department for additional information regarding weight. Phone: 800-877-8351