Indexing Plungers EN 617.2

Original design
code: PMT.100

Material: NI - Stainless steel
Type: B - Non lock-out, without lock nut

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

corrosion-resistant
precise fit
environmentally friendly

Show all Stainless Steel products

List of Indexing Plunger Types Stainless Steel Characteristics Plastic Characteristics Metric ISO Fine Threads DIN 13

Product description

Indexing plungers EN 617.2 with plastic body are a reasonably priced indexing plunger variation. The dimensions correspond to those of indexing plungers GN 617 or GN 617.1.

Lock-out types C / CK are used for applications where the plunger pin needs to stay in its retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notch keeps the plunger in the retracted position.

Specification

Threaded body
Plastic
Technopolymer (Polyamide PA-HP)
- Glass fiber reinforced
- Temperature resistant up to 266 °F (130 °C)
- Black, matte finish

Plunger pin
Stainless steelNI AISI 303

Spring
Stainless steel AISI 302

Knob
Plastic
Technopolymer (Polyamide PA)
- Temperature resistant up to 266 °F (130 °C)
- Black, matte finish
- Not removable

Lock nut
Plastic
Technopolymer (Polyamide PA-HP)
Black, matte finish

RoHS

Your Contact

You are looking for a Winco partner near you?

Part Number	d₁ Pin -0.004 / -0.006 Bore -0.003	d₂	d₃	e ≈	l₁ ≈	l₂ Type B / BK	Type C / CK	l₃	l₄	l₅ ≈	s	A/F₁	A/F₂	Max. tightening torque in Nm	Spring load ≈ Initial	End

617.2-5-3/8X24-B-NI	0.197 -0.004 / -0.006 / -0.003	3/8 x 24	0.83	0.54	1.77	0.20	0.20	0.67	0.20	2.01	0.28	0.47	0.63	8	1.57 lbf (7 N)	3.82 lbf (17 N)
617.2-6-1/2X20-B-NI	0.236 -0.004 / -0.006 / -0.003	1/2 x 20	0.98	0.63	2.13	0.24	0.24	0.79	0.24	2.40	0.31	0.55	0.75	12	2.02 lbf (9 N)	5.40 lbf (24 N)
617.2-8-5/8X18-B-NI	0.315 -0.004 / -0.006 / -0.003	5/8 x 18	1.22	0.85	2.72	0.31	0.28	1.02	0.31	2.99	0.39	0.75	0.94	18	2.47 lbf (11 N)	6.74 lbf (30 N)
617.2-5-M10X1-B-NI	0.197 -0.004 / -0.006 / -0.003	M 10 x 1	0.83	0.54	1.77	0.20	0.20	0.67	0.20	2.01	0.28	0.47	0.63	8	1.57 lbf (7 N)	3.82 lbf (17 N)
617.2-6-M12X1.5-B-NI	0.236 -0.004 / -0.006 / -0.003	M 12 x 1.5	0.98	0.63	2.13	0.24	0.24	0.79	0.24	2.40	0.31	0.55	0.75	12	2.02 lbf (9 N)	5.40 lbf (24 N)
617.2-8-M16X1.5-B-NI	0.315 -0.004 / -0.006 / -0.003	M 16 x 1.5	1.22	0.85	2.72	0.31	0.28	1.02	0.31	2.99	0.39	0.75	0.94	18	2.47 lbf (11 N)	6.74 lbf (30 N)
617.2-10-M20X1.5-B-NI	0.394 -0.004 / -0.006 / -0.003	M 20 x 1.5	1.22	0.98	3.15	0.39	0.39	1.30	0.39	3.58	0.43	0.87	1.18	25	4.27 lbf (19 N)	10.12 lbf (45 N)

Part Number	d₁ Pin -0.004 / -0.006 Bore -0.003	d₂	d₃	e ≈	l₁ ≈	l₂ Type B / BK	Type C / CK	l₃	l₄	l₅ ≈	s	A/F₁	A/F₂	Max. tightening torque in Nm	Spring load ≈ Initial	End

617.2-5-3/8X24-BK-NI	0.197 -0.004 / -0.006 / -0.003	3/8 x 24	0.83	0.54	1.77	0.20	0.20	0.67	0.20	2.01	0.28	0.47	0.63	8	1.57 lbf (7 N)	3.82 lbf (17 N)
617.2-6-1/2X20-BK-NI	0.236 -0.004 / -0.006 / -0.003	1/2 x 20	0.98	0.63	2.13	0.24	0.24	0.79	0.24	2.40	0.31	0.55	0.75	12	2.02 lbf (9 N)	5.40 lbf (24 N)
617.2-8-5/8X18-BK-NI	0.315 -0.004 / -0.006 / -0.003	5/8 x 18	1.22	0.85	2.72	0.31	0.28	1.02	0.31	2.99	0.39	0.75	0.94	18	2.47 lbf (11 N)	6.74 lbf (30 N)
617.2-5-M10X1-BK-NI	0.197 -0.004 / -0.006 / -0.003	M 10 x 1	0.83	0.54	1.77	0.20	0.20	0.67	0.20	2.01	0.28	0.47	0.63	8	1.57 lbf (7 N)	3.82 lbf (17 N)
617.2-6-M12X1.5-BK-NI	0.236 -0.004 / -0.006 / -0.003	M 12 x 1.5	0.98	0.63	2.13	0.24	0.24	0.79	0.24	2.40	0.31	0.55	0.75	12	2.02 lbf (9 N)	5.40 lbf (24 N)
617.2-8-M16X1.5-BK-NI	0.315 -0.004 / -0.006 / -0.003	M 16 x 1.5	1.22	0.85	2.72	0.31	0.28	1.02	0.31	2.99	0.39	0.75	0.94	18	2.47 lbf (11 N)	6.74 lbf (30 N)
617.2-10-M20X1.5-BK-NI	0.394 -0.004 / -0.006 / -0.003	M 20 x 1.5	1.22	0.98	3.15	0.39	0.39	1.30	0.39	3.58	0.43	0.87	1.18	25	4.27 lbf (19 N)	10.12 lbf (45 N)

Part Number	d₁ Pin -0.004 / -0.006 Bore -0.003	d₂	d₃	e ≈	l₁ ≈	l₂ Type B / BK	Type C / CK	l₃	l₄	l₅ ≈	s	A/F₁	A/F₂	Max. tightening torque in Nm	Spring load ≈ Initial	End

617.2-5-3/8X24-C-NI	0.197 -0.004 / -0.006 / -0.003	3/8 x 24	0.83	0.54	1.77	0.20	0.20	0.67	0.20	2.01	0.28	0.47	0.63	8	1.57 lbf (7 N)	3.82 lbf (17 N)
617.2-6-1/2X20-C-NI	0.236 -0.004 / -0.006 / -0.003	1/2 x 20	0.98	0.63	2.13	0.24	0.24	0.79	0.24	2.40	0.31	0.55	0.75	12	2.02 lbf (9 N)	5.40 lbf (24 N)
617.2-8-5/8X18-C-NI	0.315 -0.004 / -0.006 / -0.003	5/8 x 18	1.22	0.85	2.72	0.31	0.28	1.02	0.31	2.99	0.39	0.75	0.94	18	2.47 lbf (11 N)	6.74 lbf (30 N)
617.2-5-M10X1-C-NI	0.197 -0.004 / -0.006 / -0.003	M 10 x 1	0.83	0.54	1.77	0.20	0.20	0.67	0.20	2.01	0.28	0.47	0.63	8	1.57 lbf (7 N)	3.82 lbf (17 N)
617.2-6-M12X1.5-C-NI	0.236 -0.004 / -0.006 / -0.003	M 12 x 1.5	0.98	0.63	2.13	0.24	0.24	0.79	0.24	2.40	0.31	0.55	0.75	12	2.02 lbf (9 N)	5.40 lbf (24 N)
617.2-8-M16X1.5-C-NI	0.315 -0.004 / -0.006 / -0.003	M 16 x 1.5	1.22	0.85	2.72	0.31	0.28	1.02	0.31	2.99	0.39	0.75	0.94	18	2.47 lbf (11 N)	6.74 lbf (30 N)
617.2-10-M20X1.5-C-NI	0.394 -0.004 / -0.006 / -0.003	M 20 x 1.5	1.22	0.98	3.15	0.39	0.39	1.30	0.39	3.58	0.43	0.87	1.18	25	4.27 lbf (19 N)	10.12 lbf (45 N)

Part Number	d₁ Pin -0.004 / -0.006 Bore -0.003	d₂	d₃	e ≈	l₁ ≈	l₂ Type B / BK	Type C / CK	l₃	l₄	l₅ ≈	s	A/F₁	A/F₂	Max. tightening torque in Nm	Spring load ≈ Initial	End

617.2-5-3/8X24-CK-NI	0.197 -0.004 / -0.006 / -0.003	3/8 x 24	0.83	0.54	1.77	0.20	0.20	0.67	0.20	2.01	0.28	0.47	0.63	8	1.57 lbf (7 N)	3.82 lbf (17 N)
617.2-6-1/2X20-CK-NI	0.236 -0.004 / -0.006 / -0.003	1/2 x 20	0.98	0.63	2.13	0.24	0.24	0.79	0.24	2.40	0.31	0.55	0.75	12	2.02 lbf (9 N)	5.40 lbf (24 N)
617.2-8-5/8X18-CK-NI	0.315 -0.004 / -0.006 / -0.003	5/8 x 18	1.22	0.85	2.72	0.31	0.28	1.02	0.31	2.99	0.39	0.75	0.94	18	2.47 lbf (11 N)	6.74 lbf (30 N)
617.2-5-M10X1-CK-NI	0.197 -0.004 / -0.006 / -0.003	M 10 x 1	0.83	0.54	1.77	0.20	0.20	0.67	0.20	2.01	0.28	0.47	0.63	8	1.57 lbf (7 N)	3.82 lbf (17 N)
617.2-6-M12X1.5-CK-NI	0.236 -0.004 / -0.006 / -0.003	M 12 x 1.5	0.98	0.63	2.13	0.24	0.24	0.79	0.24	2.40	0.31	0.55	0.75	12	2.02 lbf (9 N)	5.40 lbf (24 N)
617.2-8-M16X1.5-CK-NI	0.315 -0.004 / -0.006 / -0.003	M 16 x 1.5	1.22	0.85	2.72	0.31	0.28	1.02	0.31	2.99	0.39	0.75	0.94	18	2.47 lbf (11 N)	6.74 lbf (30 N)
617.2-10-M20X1.5-CK-NI	0.394 -0.004 / -0.006 / -0.003	M 20 x 1.5	1.22	0.98	3.15	0.39	0.39	1.30	0.39	3.58	0.43	0.87	1.18	25	4.27 lbf (19 N)	10.12 lbf (45 N)

d₁ Pin -0.004 / -0.006 Bore -0.003	d₂	d₃	e ≈	l₁ ≈	l₂ Type B / BK	Type C / CK	l₃	l₄	l₅ ≈	s	A/F₁	A/F₂	Max. tightening torque in Nm	Spring load ≈ Initial	End

0.197	3/8 x 24	0.83	0.54	1.77	0.20	0.20	0.67	0.20	2.01	0.28	0.47	0.63	8	1.57 lbf (7 N)	3.82 lbf (17 N)
0.236	1/2 x 20	0.98	0.63	2.13	0.24	0.24	0.79	0.24	2.40	0.31	0.55	0.75	12	2.02 lbf (9 N)	5.40 lbf (24 N)
0.315	5/8 x 18	1.22	0.85	2.72	0.31	0.28	1.02	0.31	2.99	0.39	0.75	0.94	18	2.47 lbf (11 N)	6.74 lbf (30 N)

d₁ Pin -0.004 / -0.006 Bore -0.003	d₂	d₃	e ≈	l₁ ≈	l₂ Type B / BK	Type C / CK	l₃	l₄	l₅ ≈	s	A/F₁	A/F₂	Max. tightening torque in Nm	Spring load ≈ Initial	End

0.197	M 10 x 1	0.83	0.54	1.77	0.20	0.20	0.67	0.20	2.01	0.28	0.47	0.63	8	1.57 lbf (7 N)	3.82 lbf (17 N)
0.236	M 12 x 1.5	0.98	0.63	2.13	0.24	0.24	0.79	0.24	2.40	0.31	0.55	0.75	12	2.02 lbf (9 N)	5.40 lbf (24 N)
0.315	M 16 x 1.5	1.22	0.85	2.72	0.31	0.28	1.02	0.31	2.99	0.39	0.75	0.94	18	2.47 lbf (11 N)	6.74 lbf (30 N)
0.394	M 20 x 1.5	1.22	0.98	3.15	0.39	0.39	1.30	0.39	3.58	0.43	0.87	1.18	25	4.27 lbf (19 N)	10.12 lbf (45 N)