The cart is empty.

JW Winco Services

Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM Central Time

+1-800-877-8351 sales@jwwinco.com

Request Callback

Full name Phone number Company Country Yes, I have noted the Privacy Policy.

JW Winco Handbook
JW Winco’s handbook will support designers and engineers with the largest selection of standard parts.

Request Free Catalogs
Your Contact

You are looking for a Winco partner near you?

Please select the country. Select State

Send a message

JW Winco News
All the information you need about news from JW Winco!

All News

GN 717 Indexing Plungers Steel, Non Lock-Out, with Pull Ring / with Wire Loop

Indexing Plungers GN 717: Steel, Non Lock-Out, with Pull Ring / with Wire Loop

Type: A - With pull ring, without lock nut

Product description

GN 717 indexing plungers are characterized by small dimensions. These indexing plungers are universally suitable due to their prevention of misalignments and positioning errors of mating indexing bores.

During assembly, the maximum tightening torques shown in the table should not be exceeded when securing the lock nut.

Specification

Threaded body
SteelST, zinc plated, blue passivated finish

Plunger pin
Stainless steel
Euorpean Standard No. 1.4305 (AISI 303)

Spring
Stainless steel AISI 301

Pull ring / wire loop
Stainless steel AISI 301

Lock nut

Inch size
ANSI/ASME B18.2.2
Steel, zinc plated, blue passivated finish
Metric size
DIN 439 B / ISO 4035 / ISO 8675
Steel, zinc plated, blue passivated finish

RoHS

GN 717 Steel Indexing Plungers, Non Lock-Out, with Pull Ring / with Wire Loop sketch

Hide technical drawing

Part Options / Table

Type

A	With pull ring, without lock nut
AK	With pull ring, with lock nut
D	With wire loop, without lock nut
DK	With wire loop, with lock nut

Part Number A - With pull ring, without lock nut	Part Number AK - With pull ring, with lock nut	Part Number D - With wire loop, without lock nut	Part Number DK - With wire loop, with lock nut	d₁ Pin -0.002 Bore +0.001/+0.003	d₂ Thread	d₃	d₄	e	l₁	l₂	l₃	l₄	l₅ min.	l₆	l₇	A/F	Max. tightening torque in Nm	Spring load ≈ Initial	End


717-5-3/8X16-A-ST	717-5-3/8X16-AK-ST	717-5-3/8X16-D-ST	717-5-3/8X16-DK-ST	0.20 -0.002 / +0.001/+0.003	3/8 x 16	0.71	0.28	0.45	1.77	0.20	0.63	0.24	0.53	1.67	0.61	0.39	22	1.12 lbf (5 N)	5.40 lbf (24 N)
717-6-1/2X13-A-ST	717-6-1/2X13-AK-ST	717-6-1/2X13-D-ST	717-6-1/2X13-DK-ST	0.24 -0.002 / +0.001/+0.003	1/2 x 13	0.94	0.37	0.54	2.25	0.24	0.79	0.30	0.65	2.14	0.82	0.47	38	1.12 lbf (5 N)	4.72 lbf (21 N)
717-8-5/8X11-A-ST	717-8-5/8X11-AK-ST	717-8-5/8X11-D-ST	717-8-5/8X11-DK-ST	0.31 -0.002 / +0.001/+0.003	5/8 x 11	1.18	0.46	0.77	2.80	0.31	0.94	0.35	0.81	2.63	1.02	0.67	80	1.35 lbf (6 N)	4.95 lbf (22 N)
717-10-5/8X11-A-ST	717-10-5/8X11-AK-ST	717-10-5/8X11-D-ST	717-10-5/8X11-DK-ST	0.39 -0.002 / +0.001/+0.003	5/8 x 11	1.18	0.46	0.77	2.94	0.39	1.02	0.35	0.89	2.79	1.02	0.67	80	0.90 lbf (4 N)	6.07 lbf (27 N)
717-3-M6-A-ST	717-3-M6-AK-ST	717-3-M6-D-ST	717-3-M6-DK-ST	0.12 -0.002 / +0.001/+0.003	M 6	0.55	0.24	0.27	1.32	0.14	0.47	0.18	0.39	1.30	0.51	0.24	2	0.67 lbf (3 N)	2.70 lbf (12 N)
717-3-M6X0.75-A-ST	717-3-M6X0.75-AK-ST	717-3-M6X0.75-D-ST	717-3-M6X0.75-DK-ST	0.12 -0.002 / +0.001/+0.003	M 6 x 0.75	0.55	0.24	0.27	1.32	0.14	0.47	0.18	0.39	1.30	0.51	0.24	3	0.67 lbf (3 N)	2.70 lbf (12 N)
717-4-M6-A-ST	717-4-M6-AK-ST	717-4-M6-D-ST	717-4-M6-DK-ST	0.16 -0.002 / +0.001/+0.003	M 6	0.55	0.24	0.27	1.32	0.16	0.47	0.18	0.39	1.31	0.51	0.24	2	0.67 lbf (3 N)	2.70 lbf (12 N)
717-4-M8X1-A-ST	717-4-M8X1-AK-ST	717-4-M8X1-D-ST	717-4-M8X1-DK-ST	0.16 -0.002 / +0.001/+0.003	M 8 x 1	0.55	0.24	0.36	1.59	0.18	0.63	0.24	0.53	1.65	0.61	0.31	8	1.12 lbf (5 N)	5.40 lbf (24 N)
717-5-M8-A-ST	717-5-M8-AK-ST	717-5-M8-D-ST	717-5-M8-DK-ST	0.20 -0.002 / +0.001/+0.003	M 8	0.71	0.28	0.36	1.77	0.20	0.63	0.24	0.53	1.67	0.61	0.31	7	1.12 lbf (5 N)	5.40 lbf (24 N)
717-5-M8X1-A-ST	717-5-M8X1-AK-ST	717-5-M8X1-D-ST	717-5-M8X1-DK-ST	0.20 -0.002 / +0.001/+0.003	M 8 x 1	0.71	0.28	0.36	1.77	0.20	0.63	0.24	0.53	1.67	0.61	0.31	7	1.12 lbf (5 N)	5.40 lbf (24 N)
717-5-M10X1-A-ST	717-5-M10X1-AK-ST	717-5-M10X1-D-ST	717-5-M10X1-DK-ST	0.20 -0.002 / +0.001/+0.003	M 10 x 1	0.71	0.28	0.45	1.77	0.20	0.63	0.24	0.53	1.67	0.61	0.39	22	1.12 lbf (5 N)	5.40 lbf (24 N)
717-6-M10-A-ST	717-6-M10-AK-ST	717-6-M10-D-ST	717-6-M10-DK-ST	0.24 -0.002 / +0.001/+0.003	M 10	0.94	0.37	0.45	2.25	0.24	0.79	0.30	0.67	2.14	0.82	0.39	15	1.12 lbf (5 N)	4.72 lbf (21 N)
717-6-M12X1.5-A-ST	717-6-M12X1.5-AK-ST	717-6-M12X1.5-D-ST	717-6-M12X1.5-DK-ST	0.24 -0.002 / +0.001/+0.003	M 12 x 1.5	0.94	0.37	0.54	2.25	0.24	0.79	0.30	0.65	2.14	0.82	0.47	38	1.12 lbf (5 N)	4.72 lbf (21 N)
717-8-M12-A-ST	717-8-M12-AK-ST	717-8-M12-D-ST	717-8-M12-DK-ST	0.31 -0.002 / +0.001/+0.003	M 12	1.18	0.46	0.54	2.80	0.31	0.94	0.35	0.81	2.63	1.02	0.47	20	1.35 lbf (6 N)	4.95 lbf (22 N)
717-8-M12X1.5-A-ST	717-8-M12X1.5-AK-ST	717-8-M12X1.5-D-ST	717-8-M12X1.5-DK-ST	0.31 -0.002 / +0.001/+0.003	M 12 x 1.5	1.18	0.46	0.54	2.80	0.31	0.94	0.35	0.81	2.63	1.02	0.47	20	1.35 lbf (6 N)	4.95 lbf (22 N)
717-8-M16X1.5-A-ST	717-8-M16X1.5-AK-ST	717-8-M16X1.5-D-ST	717-8-M16X1.5-DK-ST	0.31 -0.002 / +0.001/+0.003	M 16 x 1.5	1.18	0.46	0.77	2.80	0.31	0.94	0.35	0.81	2.63	1.02	0.67	80	1.35 lbf (6 N)	4.95 lbf (22 N)
717-10-M16X1.5-A-ST	717-10-M16X1.5-AK-ST	717-10-M16X1.5-D-ST	717-10-M16X1.5-DK-ST	0.39 -0.002 / +0.001/+0.003	M 16 x 1.5	1.18	0.46	0.77	2.94	0.39	1.02	0.35	0.89	2.79	1.02	0.67	80	0.90 lbf (4 N)	6.07 lbf (27 N)

Show / Hide columns

Inch

Dimensions in: Inch (change to Metric)

d₁ Pin -0.002 Bore +0.001/+0.003	d₂ Thread	d₃	d₄	e	l₁	l₂	l₃	l₄	l₅ min.	l₆	l₇	A/F	Max. tightening torque in Nm	Spring load ≈ Initial	End

0.20	3/8 x 16	0.71	0.28	0.45	1.77	0.20	0.63	0.24	0.53	1.67	0.61	0.39	22	1.12 lbf (5 N)	5.40 lbf (24 N)
0.24	1/2 x 13	0.94	0.37	0.54	2.25	0.24	0.79	0.30	0.65	2.14	0.82	0.47	38	1.12 lbf (5 N)	4.72 lbf (21 N)
0.31	5/8 x 11	1.18	0.46	0.77	2.80	0.31	0.94	0.35	0.81	2.63	1.02	0.67	80	1.35 lbf (6 N)	4.95 lbf (22 N)
0.39	5/8 x 11	1.18	0.46	0.77	2.94	0.39	1.02	0.35	0.89	2.79	1.02	0.67	80	0.90 lbf (4 N)	6.07 lbf (27 N)

Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)

d₁ Pin -0.002 Bore +0.001/+0.003	d₂ Thread	d₃	d₄	e	l₁	l₂	l₃	l₄	l₅ min.	l₆	l₇	A/F	Max. tightening torque in Nm	Spring load ≈ Initial	End

0.12	M 6	0.55	0.24	0.27	1.32	0.14	0.47	0.18	0.39	1.30	0.51	0.24	2	0.67 lbf (3 N)	2.70 lbf (12 N)
0.12	M 6 x 0.75	0.55	0.24	0.27	1.32	0.14	0.47	0.18	0.39	1.30	0.51	0.24	3	0.67 lbf (3 N)	2.70 lbf (12 N)
0.16	M 6	0.55	0.24	0.27	1.32	0.16	0.47	0.18	0.39	1.31	0.51	0.24	2	0.67 lbf (3 N)	2.70 lbf (12 N)
0.16	M 8 x 1	0.55	0.24	0.36	1.59	0.18	0.63	0.24	0.53	1.65	0.61	0.31	8	1.12 lbf (5 N)	5.40 lbf (24 N)
0.20	M 8	0.71	0.28	0.36	1.77	0.20	0.63	0.24	0.53	1.67	0.61	0.31	7	1.12 lbf (5 N)	5.40 lbf (24 N)
0.20	M 8 x 1	0.71	0.28	0.36	1.77	0.20	0.63	0.24	0.53	1.67	0.61	0.31	7	1.12 lbf (5 N)	5.40 lbf (24 N)
0.20	M 10 x 1	0.71	0.28	0.45	1.77	0.20	0.63	0.24	0.53	1.67	0.61	0.39	22	1.12 lbf (5 N)	5.40 lbf (24 N)
0.24	M 10	0.94	0.37	0.45	2.25	0.24	0.79	0.30	0.67	2.14	0.82	0.39	15	1.12 lbf (5 N)	4.72 lbf (21 N)
0.24	M 12 x 1.5	0.94	0.37	0.54	2.25	0.24	0.79	0.30	0.65	2.14	0.82	0.47	38	1.12 lbf (5 N)	4.72 lbf (21 N)
0.31	M 12	1.18	0.46	0.54	2.80	0.31	0.94	0.35	0.81	2.63	1.02	0.47	20	1.35 lbf (6 N)	4.95 lbf (22 N)
0.31	M 12 x 1.5	1.18	0.46	0.54	2.80	0.31	0.94	0.35	0.81	2.63	1.02	0.47	20	1.35 lbf (6 N)	4.95 lbf (22 N)
0.31	M 16 x 1.5	1.18	0.46	0.77	2.80	0.31	0.94	0.35	0.81	2.63	1.02	0.67	80	1.35 lbf (6 N)	4.95 lbf (22 N)
0.39	M 16 x 1.5	1.18	0.46	0.77	2.94	0.39	1.02	0.35	0.89	2.79	1.02	0.67	80	0.90 lbf (4 N)	6.07 lbf (27 N)

Build & Price

Selected Part

Part Number

Total (net)

US$6.99

In Stock: 140

In Stock

Quantity

Create Project List

Save as Favorites

Please note our quantity discounts (US Dollars).

Min	Max	Price
1	99	US$6.99
100	249	US$6.41
250	499	US$5.83
≥ 500		US$5.24

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.028 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 800-877-8351