GN 717 Indexing Plungers Stainless Steel, Non Lock-Out, with Pull Ring / with Wire Loop

Photo

GN 717 Stainless Steel Indexing Plungers, Non Lock-Out, with Pull Ring / with Wire Loop Type: D - With wire loop, without lock nut
Material: NI - Stainless steel

Type: D - With wire loop, without lock nut
Material: NI - Stainless steel

GN 717 Stainless Steel Indexing Plungers, Non Lock-Out, with Pull Ring / with Wire Loop Type: A - With pull ring, without lock nut
Material: NI - Stainless steel

GN 717 Stainless Steel Indexing Plungers, Non Lock-Out, with Pull Ring / with Wire Loop Type: AK - With pull ring, with lock nut
Material: NI - Stainless steel

GN 717 Stainless Steel Indexing Plungers, Non Lock-Out, with Pull Ring / with Wire Loop Type: DK - With wire loop, with lock nut
Material: NI - Stainless steel

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

corrosion-resistant
precise fit
environmentally friendly

Show all Stainless Steel products

Standard Sheet GN 717 Print This Page List of Indexing Plunger Types Load Rating Information Stainless Steel Characteristics Metric ISO Threads DIN 13 Metric ISO Fine Threads DIN 13

Product description

Information

GN 717 indexing plungers are characterized by small dimensions. These indexing plungers are universally suitable due to their prevention of misalignments and positioning errors of mating indexing bores.

During assembly, the maximum tightening torques shown in the table should not be exceeded when securing the lock nut.

Specification

Threaded body
Stainless steelNI AISI 303

Plunger pin
Stainless steel AISI 303

Spring
Stainless steel AISI 301

Pull ring / wire loop
Stainless steel AISI 301

Lock nut

Inch size
ANSI/ASME B18.2.2
Stainless steel (A2)
Metric size
DIN 439 B / ISO 4035 / ISO 8675
Stainless steel (A2)

RoHS

Technical drawing

GN 717 Stainless Steel Indexing Plungers, Non Lock-Out, with Pull Ring / with Wire Loop sketch

Hide technical drawing

Part Options / Table

Type

A	With pull ring, without lock nut
AK	With pull ring, with lock nut
D	With wire loop, without lock nut
DK	With wire loop, with lock nut

Part Number A - With pull ring, without lock nut	Part Number AK - With pull ring, with lock nut	Part Number D - With wire loop, without lock nut	Part Number DK - With wire loop, with lock nut	d₁ Pin -0.002 Bore +0.001/+0.003	d₂ Thread	d₃	d₄	e	l₁	l₂	l₃	l₄	l₅ min.	l₆	l₇	A/F	Max. tightening torque in Nm	Spring load ≈ Initial	End


717-5-3/8X16-A-NI	717-5-3/8X16-AK-NI	717-5-3/8X16-D-NI	717-5-3/8X16-DK-NI	0.20	3/8 x 16	0.71	0.28	0.45	1.77	0.20	0.63	0.24	0.53	1.67	0.61	0.39	22	1.12 lbf (5 N)	5.40 lbf (24 N)
717-6-1/2X13-A-NI	717-6-1/2X13-AK-NI	717-6-1/2X13-D-NI	717-6-1/2X13-DK-NI	0.24	1/2 x 13	0.94	0.37	0.54	2.25	0.24	0.79	0.30	0.65	2.14	0.82	0.47	38	1.12 lbf (5 N)	4.72 lbf (21 N)
717-8-5/8X11-A-NI	717-8-5/8X11-AK-NI	717-8-5/8X11-D-NI	717-8-5/8X11-DK-NI	0.31	5/8 x 11	1.18	0.46	0.77	2.80	0.31	0.94	0.35	0.81	2.63	1.02	0.67	80	1.35 lbf (6 N)	4.95 lbf (22 N)
717-10-5/8X11-A-NI	717-10-5/8X11-AK-NI	717-10-5/8X11-D-NI	717-10-5/8X11-DK-NI	0.39	5/8 x 11	1.18	0.46	0.77	2.94	0.39	1.02	0.35	0.89	2.79	1.02	0.67	80	0.90 lbf (4 N)	6.07 lbf (27 N)
717-3-M6-A-NI	717-3-M6-AK-NI	717-3-M6-D-NI	717-3-M6-DK-NI	0.12	M 6	0.55	0.24	0.27	1.32	0.14	0.47	0.18	0.39	1.30	0.51	0.24	2	0.67 lbf (3 N)	2.70 lbf (12 N)
717-3-M6X0.75-A-NI	717-3-M6X0.75-AK-NI	717-3-M6X0.75-D-NI	717-3-M6X0.75-DK-NI	0.12	M 6 x 0.75	0.55	0.24	0.27	1.32	0.14	0.47	0.18	0.39	1.30	0.51	0.24	3	0.67 lbf (3 N)	2.70 lbf (12 N)
717-4-M6-A-NI	717-4-M6-AK-NI	717-4-M6-D-NI	717-4-M6-DK-NI	0.16	M 6	0.55	0.24	0.27	1.32	0.16	0.47	0.18	0.39	1.31	0.51	0.24	2	0.67 lbf (3 N)	2.70 lbf (12 N)
717-4-M8X1-A-NI	717-4-M8X1-AK-NI	717-4-M8X1-D-NI	717-4-M8X1-DK-NI	0.16	M 8 x 1	0.55	0.24	0.36	1.59	0.18	0.63	0.24	0.53	1.65	0.61	0.31	8	1.12 lbf (5 N)	5.40 lbf (24 N)
717-5-M8-A-NI	717-5-M8-AK-NI	717-5-M8-D-NI	717-5-M8-DK-NI	0.20	M 8	0.71	0.28	0.36	1.77	0.20	0.63	0.24	0.53	1.67	0.61	0.31	7	1.12 lbf (5 N)	5.40 lbf (24 N)
717-5-M8X1-A-NI	717-5-M8X1-AK-NI	717-5-M8X1-D-NI	717-5-M8X1-DK-NI	0.20	M 8 x 1	0.71	0.28	0.36	1.77	0.20	0.63	0.24	0.53	1.67	0.61	0.31	7	1.12 lbf (5 N)	5.40 lbf (24 N)
717-5-M10X1-A-NI	717-5-M10X1-AK-NI	717-5-M10X1-D-NI	717-5-M10X1-DK-NI	0.20	M 10 x 1	0.71	0.28	0.45	1.77	0.20	0.63	0.24	0.53	1.67	0.61	0.39	22	1.12 lbf (5 N)	5.40 lbf (24 N)
717-6-M10-A-NI	717-6-M10-AK-NI	717-6-M10-D-NI	717-6-M10-DK-NI	0.24	M 10	0.94	0.37	0.45	2.25	0.24	0.79	0.30	0.67	2.14	0.82	0.39	15	1.12 lbf (5 N)	4.72 lbf (21 N)
717-6-M12X1.5-A-NI	717-6-M12X1.5-AK-NI	717-6-M12X1.5-D-NI	717-6-M12X1.5-DK-NI	0.24	M 12 x 1.5	0.94	0.37	0.54	2.25	0.24	0.79	0.30	0.65	2.14	0.82	0.47	38	1.12 lbf (5 N)	4.72 lbf (21 N)
717-8-M12-A-NI	717-8-M12-AK-NI	717-8-M12-D-NI	717-8-M12-DK-NI	0.31	M 12	1.18	0.46	0.54	2.80	0.31	0.94	0.35	0.81	2.63	1.02	0.47	20	1.35 lbf (6 N)	4.95 lbf (22 N)
717-8-M12X1.5-A-NI	717-8-M12X1.5-AK-NI	717-8-M12X1.5-D-NI	717-8-M12X1.5-DK-NI	0.31	M 12 x 1.5	1.18	0.46	0.54	2.80	0.31	0.94	0.35	0.81	2.63	1.02	0.47	20	1.35 lbf (6 N)	4.95 lbf (22 N)
717-8-M16X1.5-A-NI	717-8-M16X1.5-AK-NI	717-8-M16X1.5-D-NI	717-8-M16X1.5-DK-NI	0.31	M 16 x 1.5	1.18	0.46	0.77	2.80	0.31	0.94	0.35	0.81	2.63	1.02	0.67	80	1.35 lbf (6 N)	4.95 lbf (22 N)
717-10-M16X1.5-A-NI	717-10-M16X1.5-AK-NI	717-10-M16X1.5-D-NI	717-10-M16X1.5-DK-NI	0.39	M 16 x 1.5	1.18	0.46	0.77	2.94	0.39	1.02	0.35	0.89	2.79	1.02	0.67	80	0.90 lbf (4 N)	6.07 lbf (27 N)

Show / Hide columns

Inch

Dimensions in: Inch (change to Metric)

d₁ Pin -0.002 Bore +0.001/+0.003	d₂ Thread	d₃	d₄	e	l₁	l₂	l₃	l₄	l₅ min.	l₆	l₇	A/F	Max. tightening torque in Nm	Spring load ≈ Initial	End

0.20	3/8 x 16	0.71	0.28	0.45	1.77	0.20	0.63	0.24	0.53	1.67	0.61	0.39	22	1.12 lbf (5 N)	5.40 lbf (24 N)
0.24	1/2 x 13	0.94	0.37	0.54	2.25	0.24	0.79	0.30	0.65	2.14	0.82	0.47	38	1.12 lbf (5 N)	4.72 lbf (21 N)
0.31	5/8 x 11	1.18	0.46	0.77	2.80	0.31	0.94	0.35	0.81	2.63	1.02	0.67	80	1.35 lbf (6 N)	4.95 lbf (22 N)
0.39	5/8 x 11	1.18	0.46	0.77	2.94	0.39	1.02	0.35	0.89	2.79	1.02	0.67	80	0.90 lbf (4 N)	6.07 lbf (27 N)

Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)

d₁ Pin -0.002 Bore +0.001/+0.003	d₂ Thread	d₃	d₄	e	l₁	l₂	l₃	l₄	l₅ min.	l₆	l₇	A/F	Max. tightening torque in Nm	Spring load ≈ Initial	End

0.12	M 6	0.55	0.24	0.27	1.32	0.14	0.47	0.18	0.39	1.30	0.51	0.24	2	0.67 lbf (3 N)	2.70 lbf (12 N)
0.12	M 6 x 0.75	0.55	0.24	0.27	1.32	0.14	0.47	0.18	0.39	1.30	0.51	0.24	3	0.67 lbf (3 N)	2.70 lbf (12 N)
0.16	M 6	0.55	0.24	0.27	1.32	0.16	0.47	0.18	0.39	1.31	0.51	0.24	2	0.67 lbf (3 N)	2.70 lbf (12 N)
0.16	M 8 x 1	0.55	0.24	0.36	1.59	0.18	0.63	0.24	0.53	1.65	0.61	0.31	8	1.12 lbf (5 N)	5.40 lbf (24 N)
0.20	M 8	0.71	0.28	0.36	1.77	0.20	0.63	0.24	0.53	1.67	0.61	0.31	7	1.12 lbf (5 N)	5.40 lbf (24 N)
0.20	M 8 x 1	0.71	0.28	0.36	1.77	0.20	0.63	0.24	0.53	1.67	0.61	0.31	7	1.12 lbf (5 N)	5.40 lbf (24 N)
0.20	M 10 x 1	0.71	0.28	0.45	1.77	0.20	0.63	0.24	0.53	1.67	0.61	0.39	22	1.12 lbf (5 N)	5.40 lbf (24 N)
0.24	M 10	0.94	0.37	0.45	2.25	0.24	0.79	0.30	0.67	2.14	0.82	0.39	15	1.12 lbf (5 N)	4.72 lbf (21 N)
0.24	M 12 x 1.5	0.94	0.37	0.54	2.25	0.24	0.79	0.30	0.65	2.14	0.82	0.47	38	1.12 lbf (5 N)	4.72 lbf (21 N)
0.31	M 12	1.18	0.46	0.54	2.80	0.31	0.94	0.35	0.81	2.63	1.02	0.47	20	1.35 lbf (6 N)	4.95 lbf (22 N)
0.31	M 12 x 1.5	1.18	0.46	0.54	2.80	0.31	0.94	0.35	0.81	2.63	1.02	0.47	20	1.35 lbf (6 N)	4.95 lbf (22 N)
0.31	M 16 x 1.5	1.18	0.46	0.77	2.80	0.31	0.94	0.35	0.81	2.63	1.02	0.67	80	1.35 lbf (6 N)	4.95 lbf (22 N)
0.39	M 16 x 1.5	1.18	0.46	0.77	2.94	0.39	1.02	0.35	0.89	2.79	1.02	0.67	80	0.90 lbf (4 N)	6.07 lbf (27 N)