Indexing Plungers GN 717

Type: D - With wire loop, without lock nut
Material: NI - Stainless steel

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

corrosion-resistant
precise fit
environmentally friendly

Show all Stainless Steel products

List of Indexing Plunger Types Load Rating Information Metric ISO Threads DIN 13 Metric ISO Fine Threads DIN 13 Stainless Steel Characteristics

Product description

Indexing plungers GN 717 are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.

Type A with pulling ring can be activated by finger in inaccessible places. If the indexing plungers are to be installed in areas which are not accessible by hand, type D with a pulling loop can be used for actuation from a distance. For example, this is possible with a retaining cable GN 111.2.

During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.

Specification

Guide
Stainless steelNI AISI 303

Plunger pin
Stainless steel AISI 303

Lifting ring / Wire loop
Stainless steel AISI 301

Pressure spring
Stainless steel AISI 301

Lock nut ISO 4035 / ISO 8675
Stainless steel

RoHS

Accessory

GN 909.5 Thin Hex Nuts (Stainless Steel)
GN 412.3 Locating Bushings with Tapered Flange (Steel)
GN 412.1 Mounting Blocks

Your Contact

You are looking for a Winco partner near you?

Part Number A - With pull ring, without lock nut	Part Number AK - With pull ring, with lock nut	Part Number D - With wire loop, without lock nut	Part Number DK - With wire loop, with lock nut	d₁ Pin -0.05 Guide +0.03/+0.08	d₂	d₃	d₄	e	l₁	l₂	l₃	l₄	l₅ min.	l₆	l₇	A/F	Max. tightening torque in Nm	Spring load ≈ Initial	End


717-5-3/8X16-A-NI	717-5-3/8X16-AK-NI	717-5-3/8X16-D-NI	717-5-3/8X16-DK-NI	0.197 -0.05 / +0.03/+0.08	3/8 x 16	0.71	0.28	0.45	1.77	0.20	0.63	0.24	0.53	1.67	0.61	0.39	22	1.12 lbf (5 N)	5.40 lbf (24 N)
717-6-1/2X13-A-NI	717-6-1/2X13-AK-NI	717-6-1/2X13-D-NI	717-6-1/2X13-DK-NI	0.236 -0.05 / +0.03/+0.08	1/2 x 13	0.94	0.37	0.54	2.25	0.24	0.79	0.30	0.65	2.14	0.82	0.47	38	1.12 lbf (5 N)	4.72 lbf (21 N)
717-8-5/8X11-A-NI	717-8-5/8X11-AK-NI	717-8-5/8X11-D-NI	717-8-5/8X11-DK-NI	0.315 -0.05 / +0.03/+0.08	5/8 x 11	1.18	0.46	0.77	2.80	0.31	0.94	0.35	0.81	2.63	1.02	0.67	80	1.35 lbf (6 N)	4.95 lbf (22 N)
717-10-5/8X11-A-NI	717-10-5/8X11-AK-NI	717-10-5/8X11-D-NI	717-10-5/8X11-DK-NI	0.394 -0.05 / +0.03/+0.08	5/8 x 11	1.18	0.46	0.77	2.94	0.39	1.02	0.35	0.89	2.79	1.02	0.67	80	0.90 lbf (4 N)	6.07 lbf (27 N)
717-3-M6-A-NI	717-3-M6-AK-NI	717-3-M6-D-NI	717-3-M6-DK-NI	0.118 -0.05 / +0.03/+0.08	M 6	0.55	0.24	0.27	1.32	0.14	0.47	0.18	0.39	1.30	0.51	0.24	2	0.67 lbf (3 N)	2.70 lbf (12 N)
717-3-M6X0.75-A-NI	717-3-M6X0.75-AK-NI	717-3-M6X0.75-D-NI	717-3-M6X0.75-DK-NI	0.118 -0.05 / +0.03/+0.08	M 6 x 0.75	0.55	0.24	0.27	1.32	0.14	0.47	0.18	0.39	1.30	0.51	0.24	3	0.67 lbf (3 N)	2.70 lbf (12 N)
717-4-M6-A-NI	717-4-M6-AK-NI	717-4-M6-D-NI	717-4-M6-DK-NI	0.157 -0.05 / +0.03/+0.08	M 6	0.55	0.24	0.27	1.32	0.16	0.47	0.18	0.39	1.31	0.51	0.24	2	0.67 lbf (3 N)	2.70 lbf (12 N)
717-4-M8X1-A-NI	717-4-M8X1-AK-NI	717-4-M8X1-D-NI	717-4-M8X1-DK-NI	0.157 -0.05 / +0.03/+0.08	M 8 x 1	0.55	0.24	0.36	1.59	0.18	0.63	0.24	0.53	1.65	0.61	0.31	8	1.12 lbf (5 N)	5.40 lbf (24 N)
717-5-M8-A-NI	717-5-M8-AK-NI	717-5-M8-D-NI	717-5-M8-DK-NI	0.197 -0.05 / +0.03/+0.08	M 8	0.71	0.28	0.36	1.77	0.20	0.63	0.24	0.53	1.67	0.61	0.31	7	1.12 lbf (5 N)	5.40 lbf (24 N)
717-5-M8X1-A-NI	717-5-M8X1-AK-NI	717-5-M8X1-D-NI	717-5-M8X1-DK-NI	0.197 -0.05 / +0.03/+0.08	M 8 x 1	0.71	0.28	0.36	1.77	0.20	0.63	0.24	0.53	1.67	0.61	0.31	7	1.12 lbf (5 N)	5.40 lbf (24 N)
717-5-M10X1-A-NI	717-5-M10X1-AK-NI	717-5-M10X1-D-NI	717-5-M10X1-DK-NI	0.197 -0.05 / +0.03/+0.08	M 10 x 1	0.71	0.28	0.45	1.77	0.20	0.63	0.24	0.53	1.67	0.61	0.39	22	1.12 lbf (5 N)	5.40 lbf (24 N)
717-6-M10-A-NI	717-6-M10-AK-NI	717-6-M10-D-NI	717-6-M10-DK-NI	0.236 -0.05 / +0.03/+0.08	M 10	0.94	0.37	0.45	2.25	0.24	0.79	0.30	0.67	2.14	0.82	0.39	15	1.12 lbf (5 N)	4.72 lbf (21 N)
717-6-M12X1.5-A-NI	717-6-M12X1.5-AK-NI	717-6-M12X1.5-D-NI	717-6-M12X1.5-DK-NI	0.236 -0.05 / +0.03/+0.08	M 12 x 1.5	0.94	0.37	0.54	2.25	0.24	0.79	0.30	0.65	2.14	0.82	0.47	38	1.12 lbf (5 N)	4.72 lbf (21 N)
717-8-M12-A-NI	717-8-M12-AK-NI	717-8-M12-D-NI	717-8-M12-DK-NI	0.315 -0.05 / +0.03/+0.08	M 12	1.18	0.46	0.54	2.80	0.31	0.94	0.35	0.81	2.63	1.02	0.47	20	1.35 lbf (6 N)	4.95 lbf (22 N)
717-8-M12X1.5-A-NI	717-8-M12X1.5-AK-NI	717-8-M12X1.5-D-NI	717-8-M12X1.5-DK-NI	0.315 -0.05 / +0.03/+0.08	M 12 x 1.5	1.18	0.46	0.54	2.80	0.31	0.94	0.35	0.81	2.63	1.02	0.47	20	1.35 lbf (6 N)	4.95 lbf (22 N)
717-8-M16X1.5-A-NI	717-8-M16X1.5-AK-NI	717-8-M16X1.5-D-NI	717-8-M16X1.5-DK-NI	0.315 -0.05 / +0.03/+0.08	M 16 x 1.5	1.18	0.46	0.77	2.80	0.31	0.94	0.35	0.81	2.63	1.02	0.67	80	1.35 lbf (6 N)	4.95 lbf (22 N)
717-10-M16X1.5-A-NI	717-10-M16X1.5-AK-NI	717-10-M16X1.5-D-NI	717-10-M16X1.5-DK-NI	0.394 -0.05 / +0.03/+0.08	M 16 x 1.5	1.18	0.46	0.77	2.94	0.39	1.02	0.35	0.89	2.79	1.02	0.67	80	0.90 lbf (4 N)	6.07 lbf (27 N)

d₁ Pin -0.05 Guide +0.03/+0.08	d₂	d₃	d₄	e	l₁	l₂	l₃	l₄	l₅ min.	l₆	l₇	A/F	Max. tightening torque in Nm	Spring load ≈ Initial	End

0.197	3/8 x 16	0.71	0.28	0.45	1.77	0.20	0.63	0.24	0.53	1.67	0.61	0.39	22	1.12 lbf (5 N)	5.40 lbf (24 N)
0.236	1/2 x 13	0.94	0.37	0.54	2.25	0.24	0.79	0.30	0.65	2.14	0.82	0.47	38	1.12 lbf (5 N)	4.72 lbf (21 N)
0.315	5/8 x 11	1.18	0.46	0.77	2.80	0.31	0.94	0.35	0.81	2.63	1.02	0.67	80	1.35 lbf (6 N)	4.95 lbf (22 N)
0.394	5/8 x 11	1.18	0.46	0.77	2.94	0.39	1.02	0.35	0.89	2.79	1.02	0.67	80	0.90 lbf (4 N)	6.07 lbf (27 N)

d₁ Pin -0.05 Guide +0.03/+0.08	d₂	d₃	d₄	e	l₁	l₂	l₃	l₄	l₅ min.	l₆	l₇	A/F	Max. tightening torque in Nm	Spring load ≈ Initial	End

0.118	M 6	0.55	0.24	0.27	1.32	0.14	0.47	0.18	0.39	1.30	0.51	0.24	2	0.67 lbf (3 N)	2.70 lbf (12 N)
0.118	M 6 x 0.75	0.55	0.24	0.27	1.32	0.14	0.47	0.18	0.39	1.30	0.51	0.24	3	0.67 lbf (3 N)	2.70 lbf (12 N)
0.157	M 6	0.55	0.24	0.27	1.32	0.16	0.47	0.18	0.39	1.31	0.51	0.24	2	0.67 lbf (3 N)	2.70 lbf (12 N)
0.157	M 8 x 1	0.55	0.24	0.36	1.59	0.18	0.63	0.24	0.53	1.65	0.61	0.31	8	1.12 lbf (5 N)	5.40 lbf (24 N)
0.197	M 8	0.71	0.28	0.36	1.77	0.20	0.63	0.24	0.53	1.67	0.61	0.31	7	1.12 lbf (5 N)	5.40 lbf (24 N)
0.197	M 8 x 1	0.71	0.28	0.36	1.77	0.20	0.63	0.24	0.53	1.67	0.61	0.31	7	1.12 lbf (5 N)	5.40 lbf (24 N)
0.197	M 10 x 1	0.71	0.28	0.45	1.77	0.20	0.63	0.24	0.53	1.67	0.61	0.39	22	1.12 lbf (5 N)	5.40 lbf (24 N)
0.236	M 10	0.94	0.37	0.45	2.25	0.24	0.79	0.30	0.67	2.14	0.82	0.39	15	1.12 lbf (5 N)	4.72 lbf (21 N)
0.236	M 12 x 1.5	0.94	0.37	0.54	2.25	0.24	0.79	0.30	0.65	2.14	0.82	0.47	38	1.12 lbf (5 N)	4.72 lbf (21 N)
0.315	M 12	1.18	0.46	0.54	2.80	0.31	0.94	0.35	0.81	2.63	1.02	0.47	20	1.35 lbf (6 N)	4.95 lbf (22 N)
0.315	M 12 x 1.5	1.18	0.46	0.54	2.80	0.31	0.94	0.35	0.81	2.63	1.02	0.47	20	1.35 lbf (6 N)	4.95 lbf (22 N)
0.315	M 16 x 1.5	1.18	0.46	0.77	2.80	0.31	0.94	0.35	0.81	2.63	1.02	0.67	80	1.35 lbf (6 N)	4.95 lbf (22 N)
0.394	M 16 x 1.5	1.18	0.46	0.77	2.94	0.39	1.02	0.35	0.89	2.79	1.02	0.67	80	0.90 lbf (4 N)	6.07 lbf (27 N)