Indexing Plungers GN 817.6

Type: EC - Lock-out, with position monitoring

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

corrosion-resistant
precise fit
environmentally friendly

Show all Stainless Steel products

IP Protection Classes List of Indexing Plunger Types Magnet Characteristics Load Rating Information ISO Fundamental Tolerances Plastic Characteristics Stainless Steel Characteristics

Product description

Indexing plungers GN 817.6 with sensor for position monitoring allow for electronic monitoring of the plunger pin state. For this purpose, a magnet is integrated into the plunger pin that switches the sensor upon engaging after approx. 2/3 of the locking distance l₁.

The sensor electronics then outputs a high signal, e.g. to a machine control, and indicates this switch state with an LED on the sensor.

To prevent faults, no external magnetic fields should be acting on the indexing plunger. The indexing plungers GN 817.6 are delivered with enclosed sensor (not installed), sensor clip, Allen^® wrench and hex nut.

Specification

Guide
Stainless steel AISI 303

Plunger pin
Stainless steel AISI 303
Chemically nickel plated

Knob
Plastic, Polyamide (PA)

Black, matte finish
Not removable

Magnet
Hard ferrite (HF)

Sensor / sensor clip
Plastic,
Polyamide (PA)
Black, matte finish

Cable (outer sheath)
Plastic, Polyurethane (PUR)
Black

Hex nut ISO 8675
Stainless steel A2

RoHS

Accessory

Cables with Connector Coupling GN 330 (3-pole, 2 or 5 meters long)

GN 817.6 Stainless Steel Indexing Plungers, with Sensor for Position Monitoring sketch

Hide technical drawing

Part Options / Table

Type

EB	Non lock-out, with position monitoring
EC	Lock-out, with position monitoring

Connection type

Plug

Part Number	d₁ Pin -0.001/-0.002 Bore H7	l₁	l₅ Cable length in meters	d₂	d₃	d₄	k	l₂	l₃	l₄	A/F	Spring load ≈ Inital	End

817.6-4-6-M8X1-EB-S-0.5	0.157 -0.001/-0.002 / H7	0.24	0.5	M 8 x 1	0.63	0.08	0.55	1.63	0.63	0.45	0.39	0.90 lbf (4 N)	2.81 lbf (12.5 N)
817.6-5-8-M10X1-EB-S-0.5	0.197 -0.001/-0.002 / H7	0.31	0.5	M 10 x 1	0.75	0.08	0.63	1.83	0.71	0.49	0.47	1.12 lbf (5 N)	4.05 lbf (18 N)
817.6-6-9-M12X1.5-EB-S-0.5	0.236 -0.001/-0.002 / H7	0.35	0.5	M 12 x 1.5	0.91	0.08	0.79	2.15	0.87	0.49	0.55	1.35 lbf (6 N)	5.62 lbf (25 N)
817.6-8-12-M16X1.5-EB-S-0.5	0.315 -0.001/-0.002 / H7	0.47	0.5	M 16 x 1.5	1.10	0.08	0.94	2.54	1.02	0.57	0.67	1.91 lbf (8.5 N)	6.29 lbf (28 N)
817.6-10-12-M16X1.5-EB-S-0.5	0.394 -0.001/-0.002 / H7	0.47	0.5	M 16 x 1.5	1.10	0.08	0.94	2.54	1.02	0.57	0.67	2.14 lbf (9.5 N)	8.54 lbf (38 N)
817.6-12-15-M20X1.5-EB-S-0.5	0.472 -0.001/-0.002 / H7	0.59	0.5	M 20 x 1.5	1.30	0.08	1.12	3.07	1.30	0.65	0.87	2.59 lbf (11.5 N)	8.99 lbf (40 N)
817.6-16-20-M24X2-EB-S-0.5	0.630 -0.001/-0.002 / H7	0.79	0.5	M 24 x 2	1.30	0.08	1.12	3.35	1.50	0.73	1.06	2.92 lbf (13 N)	12.14 lbf (54 N)

Part Number	d₁ Pin -0.001/-0.002 Bore H7	l₁	l₅ Cable length in meters	d₂	d₃	d₄	k	l₂	l₃	l₄	A/F	Spring load ≈ Inital	End

817.6-4-6-M8X1-EC-S-0.5	0.157 -0.001/-0.002 / H7	0.24	0.5	M 8 x 1	0.63	0.08	0.55	1.63	0.63	0.45	0.39	0.90 lbf (4 N)	2.81 lbf (12.5 N)
817.6-5-8-M10X1-EC-S-0.5	0.197 -0.001/-0.002 / H7	0.31	0.5	M 10 x 1	0.75	0.08	0.63	1.83	0.71	0.49	0.47	1.12 lbf (5 N)	4.05 lbf (18 N)
817.6-6-9-M12X1.5-EC-S-0.5	0.236 -0.001/-0.002 / H7	0.35	0.5	M 12 x 1.5	0.91	0.08	0.79	2.15	0.87	0.49	0.55	1.35 lbf (6 N)	5.62 lbf (25 N)
817.6-8-12-M16X1.5-EC-S-0.5	0.315 -0.001/-0.002 / H7	0.47	0.5	M 16 x 1.5	1.10	0.08	0.94	2.54	1.02	0.57	0.67	1.91 lbf (8.5 N)	6.29 lbf (28 N)
817.6-10-12-M16X1.5-EC-S-0.5	0.394 -0.001/-0.002 / H7	0.47	0.5	M 16 x 1.5	1.10	0.08	0.94	2.54	1.02	0.57	0.67	2.14 lbf (9.5 N)	8.54 lbf (38 N)
817.6-12-15-M20X1.5-EC-S-0.5	0.472 -0.001/-0.002 / H7	0.59	0.5	M 20 x 1.5	1.30	0.08	1.12	3.07	1.30	0.65	0.87	2.59 lbf (11.5 N)	8.99 lbf (40 N)
817.6-16-20-M24X2-EC-S-0.5	0.630 -0.001/-0.002 / H7	0.79	0.5	M 24 x 2	1.30	0.08	1.12	3.35	1.50	0.73	1.06	2.92 lbf (13 N)	12.14 lbf (54 N)

Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)

d₁ Pin -0.001/-0.002 Bore H7	l₁	l₅ Cable length in meters	d₂	d₃	d₄	k	l₂	l₃	l₄	A/F	Spring load ≈ Inital	End

0.157	0.24	0.5	M 8 x 1	0.63	0.08	0.55	1.63	0.63	0.45	0.39	0.90 lbf (4 N)	2.81 lbf (12.5 N)
0.197	0.31	0.5	M 10 x 1	0.75	0.08	0.63	1.83	0.71	0.49	0.47	1.12 lbf (5 N)	4.05 lbf (18 N)
0.236	0.35	0.5	M 12 x 1.5	0.91	0.08	0.79	2.15	0.87	0.49	0.55	1.35 lbf (6 N)	5.62 lbf (25 N)
0.315	0.47	0.5	M 16 x 1.5	1.10	0.08	0.94	2.54	1.02	0.57	0.67	1.91 lbf (8.5 N)	6.29 lbf (28 N)
0.394	0.47	0.5	M 16 x 1.5	1.10	0.08	0.94	2.54	1.02	0.57	0.67	2.14 lbf (9.5 N)	8.54 lbf (38 N)
0.472	0.59	0.5	M 20 x 1.5	1.30	0.08	1.12	3.07	1.30	0.65	0.87	2.59 lbf (11.5 N)	8.99 lbf (40 N)
0.630	0.79	0.5	M 24 x 2	1.30	0.08	1.12	3.35	1.50	0.73	1.06	2.92 lbf (13 N)	12.14 lbf (54 N)

Build & Price

Electrical Properties of the Sensor

Output function

Normally open (NO)

Switch output

PNP

Supply voltage

10 - 30 V DC

Continuous current I_a

≤ 100 mA

Connection type
Plug (S)

3-pole plug M8x1,
freely rotating with knurled screw connection, with PUR cable 0.5 m

Protection class

IP 67

Switching frequency

1,000 Hz

Power consumption

≤ 8 mA

Voltage drop

≤ 2.5 V

Protection class

III

Response sensitivity

2.8 mT

Operating temperature

-13 °F to + 167 °F (-25 °C to +75 °C)

Shock and vibration resistance

30 g, 11 ms / 10 - 55 Hz, 1 mm

EMC

According to EN 60947-5-2

Reverse polarity protection

Yes

Short-circuit protection

Yes

**Activation impulse
**suppression

Yes

Approvals, conformity declarations

Assembly Instruction

The position of the sensor cable can be freely determined when installing the sensor clip.

Installation steps:

Insert the sensor into the sensor clip from the side.
Tighten the hex socket screw of the sensor.
Clip the sensor clip into the ring slot of the indexing plunger in any orientation and then adjust the direction by turning, if necessary.

Selected Part

Part Number

Total (net)

US$144.19

Call / Email for Delivery Time

Quantity

Create Project List

Save as Favorites

Please note our quantity discounts (US Dollars).

Min	Max	Price
1	24	US$144.19
25	49	US$132.17
50	99	US$120.16
≥ 100		US$108.14

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.059 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 800-877-8351

CAD Download

Other Data Formats

About CAD Downloads

Need Help?

Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM Central Time: 800-877-8351

Special Requests | Contact our sales team

Request Callback

Your Contact

GN 817.6 Indexing Plungers Stainless Steel, with Sensor for Position Monitoring

Product Family Stainless Steel

Product description

Specification

Accessory

Part Options / Table

Type

Connection type

Type: EB - Non lock-out, with position monitoring

Type: EC - Lock-out, with position monitoring

Metric

Build & Price

Electrical Properties of the Sensor

Assembly Instruction

Selected Part

CAD Download

CAD data

Login

Email CAD File

Need Help?

This could also be interesting...

GN 617

GN 717

GN 817

GN 817

GN 717

GN 617

GN 617.1

GN 617

GN 817

GN 817

GN 617.1

GN 617.1

GN 717

GN 717

Recently Viewed

GN 817.6

GN 416.1

MV-M

GN 909

GN 237

GN 589.5

GN 798.4

GN 3492

GN 509.5

AN 5671

Your Contact

JW Winco Services